bargeboard from GBP 7 | See the cheapest prices and offers on Cobiro CSS.com

Fascia Bargeboard Finial - 335mm Black Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two bargeboards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s replacement fascia bargeboard finial is 335mm in length.

GBP 7.42

1

Fascia Bargeboard Finial - 335mm Anthracite Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two bargeboards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s replacement fascia bargeboard finial is 335mm in length.

GBP 7.42

1

Fascia Bargeboard Moulding Trim - 500mm White

Bargeboard mouldings are a clever way of adding interest to a plain barge or gable end.Each section is 500mm long. The moulding sections should be screwed to the underside of the barge boards using four 15mm x 3mm self tapping screws. The joint between the moulding and the bargeboard should then be sealed using low modulus sealant.

GBP 12.82

1

Fascia Bargeboard Finial - 335mm Dark Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two barge boards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s fascia bargeboard finial is 335mm in length and is coated in smooth dark grey.Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 7.42

1

Fascia Bargeboard Finial - 335mm Storm Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two barge boards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s fascia bargeboard finial is 335mm in length and is coated in smooth storm grey.Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 7.42

1

Fascia Bargeboard Finial - 340mm White

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 8.23

1

FloPlast Fascia Bargeboard Finial - 340mm Rosewood

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 9.41

1

FloPlast Fascia Bargeboard Finial - 340mm Golden Oak

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 9.41

1

FloPlast Fascia Bargeboard Finial - 340mm Black Ash Woodgrain

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 9.41

2