763 results (0,22493 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Gender

Merchant

Show all

Price (EUR)

Show all

Reset filter

Products
From
Shops

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe Extender

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe Extender

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe ExtenderThe IFS POE304-EX-4P-V2 is remotely powered via Ethernet cable from a PoE-bt injecting device eliminating the need for local power requirements. The POE304-EX-4P-V2 can then transmit up to 4-ports of Ethernet data and PoE-afat power dependent on the Powered Devices PD power demand.The IFS PoE-bt solution facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reducing the need for AC wiring and installation costs.Key Features4-Port POE Switch powered by 1 x POE-bt input up to 95WUp to 75 watts shared POE powerPlug-and-play self-powered designCan be used with an IFS PoE-Ultra Injector or other POE-bt compliantPSE equipmentSupports 101001000Base-T EthernetAuto-detect of PoE equipment providing protection from incorrect installationCurrent overload detectionLED Indicators for PoE In PoE Out DataCan be daisy-chained to extend data and PoE on a single network cable a maximum of 300m

GBP 229.66
1

Netgear GS516UP 16 Port Gigabit Ethernet Unmanaged Network Switch with 8 X PoE+ and 8 X Ultra60 PoE++

Netgear GS516UP 16 Port Gigabit Ethernet Unmanaged Network Switch with 8 X PoE+ and 8 X Ultra60 PoE++

NETGEAR brings even larger PoE budgets on Unmanaged switches with Ultra60 PoE++ technology with two new 16-Port (GS516UP) and 24-port (GS524UP) Unmanaged Switches, ideal for powerful PoE+/PoE++ installations with impressive PoE budgets up to 380W and 480W, a compact size, plug-and-play installation, and reliable performance at affordable prices. These switches can support all types of PoE installation with larger PoE budgets and ports that provide PoE+ and PoE++ power for up to 60W per port. Standardized to IEEEE 802.3bt, the Ultra60 PoE++ switches can deliver up to 60W of power per port, allowing the connections of higher power required devices, such as high performance 802.11AX wireless access points, PTZ and 4K IP surveillance cameras, PoE lighting, PoE-powered audio speakers, as well as other high-powered

GBP 0.00
1

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable UnboxedThe Elmdene PoE UltraPod is a unique PoE powered device that can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A.If the PoE power being provided to the input fails the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device allowing data to continue to flow.Available as a DIN rail mountable module or a boxed unit. It can be used in a variety of PoE applications such as CCTV or Access control.Installer friendly RJ45 connections are provided to off er a simple plug and play solution without the requirement of terminating Cat5 connections.Key FeaturesProvides up to 3A to the device with an additional 0.5A available for battery charging PoE requiredOffers battery back-up on loss of input PoE powerDIN rail or screw mountable moduleBoxed unit has space for 17Ah batteryBoxed unit has fixing points for commonly used access control boardsProvides remote fault monitoring outputsData pass through for IP connections 10100Mbps

GBP 113.45
1

StarTech.com 4 Port Multi-Gigabit PoE+ PoE++ Injector

StarTech.com 4 Port Multi-Gigabit PoE+ PoE++ Injector

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions (NA/JP, EU, UK, and ANZ). Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage. Experience streamlined cable management with all network cables routed from one side of the unit for a clean and organized setup. Tailor the power output to the specific needs of the device using the Power Output Switch. The options include 90W, 95W PoH, or legacy 60W (for UPoE/UPoE+) for all the ports on the PoE Injector Adapter.The Level-4 ESD protection (15kV air and 8kV contact) enhances device safety and reduces EMI for stable operation, minimizing the risk of downtime and hardware failures.The unmanaged PoE Injector with NBASE-T technology provides access to an increased bandwidth up to 5Gbps, significantly reducing network slowdowns during data-intensive applications such as streaming high-definition video feeds, high-speed Internet, access local network resources, online or local network backups, and FTP access.

GBP 369.99
1