25 results (0,13528 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Hollow Soffit H Trim - 5mtr Dark Grey Smooth

Hollow Soffit H Trim - 5mtr Dark Grey Smooth

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwork and can be used horizontally or vertically. Freefoamand#039;s hollow soffit H trims are 5-metres long and finished in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 15.13
1

Hollow Soffit H Trim - 5mtr Storm Grey Smooth

Hollow Soffit H Trim - 5mtr Storm Grey Smooth

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwork and can be used horizontally or vertically. Freefoamand#039;s hollow soffit H trims are 5-metres long and finished in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 15.13
1

Hollow Soffit J Trim - 5mtr Storm Grey Smooth

Hollow Soffit J Trim - 5mtr Storm Grey Smooth

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed to the underside of the batten fixed to the wall, or the underside of the soffit bearers. Freefoamand#039;s hollow soffit J trims are 5-metres in length and are finished in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 12.10
1

Hollow Soffit J Trim - 5mtr Dark Grey Smooth

Hollow Soffit J Trim - 5mtr Dark Grey Smooth

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed to the underside of the batten fixed to the wall, or the underside of the soffit bearers. Freefoamand#039;s hollow soffit J trims are 5-metres in length and are finished in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 12.10
1

Hollow Soffit F Trim - 5mtr Storm Grey Smooth

Hollow Soffit F Trim - 5mtr Storm Grey Smooth

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is level every 3 feet by placing a level across the gap that lies between the fascia board and siding to ensure it is accurate.Freefoamand#039;s hollow soffit F trim is 5-metres in length and is coated in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 13.38
1

Hollow Soffit F Trim - 5mtr Dark Grey Smooth

Hollow Soffit F Trim - 5mtr Dark Grey Smooth

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is level every 3 feet by placing a level across the gap that lies between the fascia board and siding to ensure it is accurate.Freefoamand#039;s hollow soffit F trim is 5-metres in length and is coated in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 13.38
1

Fascia Double End Corner Trim - 600mm Storm Grey Smooth

Fascia Double End Corner Trim - 600mm Storm Grey Smooth

Freefoamand#039;s fascia double-ended corners are supplied in 600mm length and coated in a smooth storm grey.Double-ended corners are used to cover the expansion gap between two fascia boards at the corners of the eaves. This can be achieved by trimming the corner to size, set it in place, and seal it with superglue.Please check out this video for a quick introduction to installing corners and joiners. Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 13.32
1

Fascia Double End Corner Trim - 600mm Dark Grey Smooth

Fascia Double End Corner Trim - 600mm Dark Grey Smooth

Freefoamand#039;s fascia double-ended corners are supplied in 600mm length and coated in a smooth dark grey.Double-ended corners are used to cover the expansion gap between two fascia boards at the corners of the eaves. This can be achieved by trimming the corner to size, set it in place, and seal it with superglue.Please check out this video for a quick introduction to installing corners and joiners. Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 13.32
1

Fascia Bargeboard Finial - 335mm Dark Grey Smooth

Fascia Bargeboard Finial - 335mm Dark Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two barge boards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s fascia bargeboard finial is 335mm in length and is coated in smooth dark grey.Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 11.12
1

Fascia Bargeboard Finial - 335mm Storm Grey Smooth

Fascia Bargeboard Finial - 335mm Storm Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two barge boards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s fascia bargeboard finial is 335mm in length and is coated in smooth storm grey.Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 11.12
1

Fascia Bargeboard Finial - 335mm Black Smooth

Fascia Bargeboard Finial - 335mm Black Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two bargeboards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s replacement fascia bargeboard finial is 335mm in length.

GBP 11.12
1

Fascia Bargeboard Finial - 335mm Anthracite Grey Smooth

Fascia Bargeboard Finial - 335mm Anthracite Grey Smooth

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two bargeboards at the apex of the roof.The bargeboard system must expand and contract correctly dependant on the temperature. For any PVC fascia installation, it is recommended to glue one side of the finial to the board and seal the other side with low modulus silicon , which allows for movement within the joint.Freefoamand#039;s replacement fascia bargeboard finial is 335mm in length.

GBP 11.12
1

Fascia Double End Joint Trim - 600mm Dark Grey Smooth

Fascia Double End Joint Trim - 600mm Dark Grey Smooth

fascia double-ended joints, or fascia joiners, are used to cover the expansion gap that should be left between two fascia boards._x000D_These fascia joiners are 600mm in length and coated in a smooth dark grey._x000D_Please check out this video for a quick introduction to installing corners and joiners._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 9.98
1

Fascia Double End Joint Trim - 600mm Storm Grey Smooth

Fascia Double End Joint Trim - 600mm Storm Grey Smooth

fascia double-ended joints, or fascia joiners, are used to cover the expansion gap that should be left between two fascia boards._x000D_These fascia joiners are 600mm in length and coated in a smooth storm grey._x000D_Please check out this video for a quick introduction to installing corners and joiners._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 11.10
1