14 results (0,14818 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Astore Tee

Astore Tee

The PP compression fittings Astore can be used to connect PE pipes in water transport systems, and are suitable in the realization of both irrigation segments and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The joint can be installed on PE pipes according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are manufactured according to ISO 7/1. Technical features Compression fitting Astore Compression fitting material Astore: polypropylene copolymer Color: black Sealing ring material: white acetal resin Gasket: toroidal in nbr Reinforcing ring material: AISI 430 Thrust sleeve: d.75, d.90, d.110 in black polypropylene copolymer Compatibility: PE pipes

GBP 6.60
1

Astore Female Adaptor

Astore Female Adaptor

The series of PP compression fittings Astore can be used to connect PE pipes in water transport systems, and is suitable both in the irrigation segment and in drinking and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical features Astore female compression fitting  Material of the fitting Astore: polypropylene copolymer Color: black Material of scratch ring: white acetal resin Gasket: toroidal in nbr Reinforcing ring material: AISI 430 Compatibility: PE pipes

GBP 3.10
1

Astore Male Adaptor

Astore Male Adaptor

The series of PP compression fittings Astore is suitable for connecting PE pipes in water transport systems, and can be used both in the irrigation segment and in drinking water and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical features Astore male compression fitting D.50x1"1/2 Material of the fitting Astore: polypropylene copolymer Color: black Material of scratch ring: white acetal resin Gasket: toroidal in nbr Reinforcement ring material: AISI 430 Compatibility: PE pipes

GBP 3.80
1

Astore Tee Male Threaded

Astore Tee Male Threaded

The PP compression fittings Astore are perfect to connect PE pipes in water transport systems, and can be used both in the irrigation segment and in drinking water and potable water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The joint can be installed on PE pipes according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are manufactured according to ISO 7/1. Technical characteristics N male Astore tightening  Compression fitting material Astore: polypropylene copolymer Color: black Sealing ring material: white acetal resin Gasket: toroidal in nbr Reinforcing ring material: AISI 430 Thrust sleeve: d.75, d.90, d.110 in black polypropylene copolymer Compatibility: PE pipes

GBP 6.80
1

Astore Tee Female Threaded

Astore Tee Female Threaded

The PP compression fittings Astore can be used with PE pipes in the realization of water transport systems, both in the irrigation segment and in drinking water and potable water systems. These fittings comply with the requirements of ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes complying with ISO 3607, DIN 8072, DIN 8074, UNI 10910. The threaded versions are manufactured according to ISO 7/1. Technical characteristics TI female Astore tightening D.25x3/4" Compression fitting material Astore: polypropylene copolymer Color: black Sealing ring material: white acetal resin Gasket: toroidal in nbr Reinforcing ring material: AISI 430 Thrust sleeve: d.75, d.90, d.110 in black polypropylene copolymer Compatibility: PE pipes

GBP 6.10
1

Georg Fischer 1/2" Male Cylinder Valve Kit - 150 pieces

Georg Fischer 1/2" Male Cylinder Valve Kit - 150 pieces

for Dripline or PE Tubing Available in packs of 150 pieces in the following sizes: - Diam. 16 - Diam. 20   IJOINT compression fittings guarantee practical and safe use, with important advantages for users. The new line of compression fittings from GF Piping Systems has been developed for use in water systems, ensuring quicker and easier installation than traditional compression fittings. The lip seal makes this product unique and long lasting. Superlative quality and innovative features make iJOINT ideal for the global drinking water market. iJOINT encompasses all the benefits of plastics: no rust or scale, lightweight construction, no leaks, excellent pressure resistance, to name a few. In summary, iJOINT provides excellent cost effectiveness with a life cycle of at least 50 years.   IJOINT Compression Fittings Features: Cap - Ergonomic design for easy handling Lip seal - Special design for optimal performance Staple ring - No interference during insertion and maximum tensile strength Locked push ring - Compresses the lip seal   Benefits: Quick and easy installation iJOINT is ready to install - no need to disassemble the fitting. Easy insertion of the pipe even in larger sizes due to the fact that the staple ring does not come into contact with the pipe during installation. Thanks to the use of the special wrench GF, it allows to tighten the ferrules in an optimal way. Lip Gasket The special gasket (in NBR) is lubricated to allow an easy insertion of the pipe even if it is not prelubricated. The special lip seal guarantees an exceptional hydraulic seal even in case of ovalised, chipped or undersized tubes. Safe and long-lasting design The special design and the use of high quality raw materials guarantee for the entire range a perfect resistance to high pressure and anti-unthreading forces, even in case of water hammer. The anti-rotation system prevents accidental unscrewing of the cap. All the components are fixed in the body in order to prevent them from coming out should you decide to disassemble the fitting.   Intended Use: IJOINT fittings are intended for exclusive use in the pressure and temperature range allowed in the piping system in which they are installed. Application: Water In order to ensure safety and operation, please note the following: Use iJOINT fittings only according to their intended specifications Assembly and installation must be done by qualified personnel and functionality must be checked periodically The piping system must be installed by qualified personnel Users and operators must be informed regularly about all aspects of occupational safety and environmental protection, especially as they pertain to pressure piping systems Users and operators must be thoroughly familiar with the operating instructions and must comply with the directives contained therein. Transport and Storage: IJOINT fittings must be transported and stored in their original packaging IJOINT fittings must be protected from harmful influences such as dirt and especially from heat and UV radiation. Technical data are not binding. They are not to be considered as guaranteed properties or warranties of quality or durability. Subject to change Click to download: IJOINT Compression Fittings Brochure IJOINT Compression Fittings Installation Manual

GBP 525.60
1

Astore Elbow Male Threaded

Astore Elbow Male Threaded

The series of PP compression elbows Astore, can be used to connect PE pipes in water transport systems, both in the irrigation segment and in drinking and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical features Elbow Astore male tightening D.25x3/4" Elbow material Astore: polypropylene copolymer Color: black Scratch ring material: white acetal resin Gasket material: toroidal in nbr Reinforcing ring material: AISI 430 Compatibility: PE pipes

GBP 4.80
1

Astore Coupling

Astore Coupling

The series of PP compression sleeves Astore is suitable for connecting PE pipes in water transport systems, and can be used in the irrigation segment as well as in drinking and drinking water systems. These sleeves comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical characteristics Sleeve Astore to tighten  Sleeve material Astore: polypropylene copolymer Color: black Crimping ring material: white acetal resin Gasket material: toroidal in nbr Reinforcement ring material: AISI 430 Compatibility: PE pipes

GBP 4.80
1

Astore Elbow

Astore Elbow

The series of PP compression elbows Astore, suitable for connecting PE pipes in water transport systems, can be used both in the irrigation segment and in drinking and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical characteristics Elbow Astore to tighten Elbow material Astore: polypropylene copolymer Color: black Scratch ring material: white acetal resin Gasket: toroidal in nbr Reinforcement ring material: AISI 430 Compatibility: PE pipes

GBP 5.10
1

Astore Elbow Female Threaded

Astore Elbow Female Threaded

The series of PP compression elbows Astore, is suitable for connecting PE pipes in water transport systems, and can be used both in the irrigation segment and in drinking and drinking water systems. These fittings comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes made according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical features Elbow Astore female tightening  Elbow material Astore: polypropylene copolymer Color: black Material of scratch ring: white acetal resin Gasket material: toroidal in nbr Reinforcing ring material: AISI 430 Compatibility: PE pipes

GBP 4.80
1

Astore Clamping Cap

Astore Clamping Cap

The series of fittings and compression plugs in PP Astore can be used to connect PE pipes in water transport systems, and is suitable both in the irrigation segment and in drinking and drinking water systems. These plugs comply with ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561, UNI 9562, BS 5114/75. The coupling can be installed on PE pipes manufactured according to ISO 3607, DIN 8072, DIN 8074, UNI 10910. Threaded versions are made according to ISO 7/1. Technical characteristics Cap Astore to tighten Cap material Astore: polypropylene copolymer Color: black Scratch ring material: white acetal resin Gasket material: toroidal in nbr Reinforcement ring material: AISI 430 Compatibility: PE pipes

GBP 3.60
1

Irritec 3 Ways Solenoid Valve VTN 1" 24VAC

Irritec 3 Ways Solenoid Valve VTN 1" 24VAC

The VTN Series solenoid valves are the combination of reliability derived from the VPN series and unique innovation. VTNs are "through-hole" solenoid valves that assemble to the manifold without the need for additional fittings, Teflon or tools. They are manually screwed together in series by means of the 1" female threaded swivel nut with O-R seal and the 1" male thread. It is possible to assemble a large number of solenoid valves in series, however it is recommended to assemble a maximum of 24 solenoid valves in series per manifold. At the outlet of the solenoid valve with 1" female swivel nut it is necessary to insert a compression fitting to connect the sector pipe. This simple process speeds up the installation enormously, guaranteeing a compact manifold thanks to which it is possible to concentrate in the well also the compression fittings at the exit of the solenoid valves allowing an easy and comfortable maintenance. VTN has the same dimensions as most tees and manifolds on the market.   Solenoid Valve Irritec VTN Series available in 1" size in 24 Vac and 9 Vdc latch versions (for battery operated systems).   Features Solenoid valve Irritec Series VTN 1" 3 way with 24Vac manifold with flow control Connection: 1" F/M/F Power supply: 24 VAC Valve body in polyamide - 30% glass fiber NBR membrane (Buna-N) 2 Swivel 1" polypropylene ring nuts with O-ring seals (nozzles) Working pressure 0,5 - 10 bar Fluid temperature max 60 °C Installation in any position Manual opening 45° rotation of the solenoid Watertight solenoid IP 67 Inrush/speed absorption 330-210 mA Stainless steel core WRAS approval Flow Control: SI Overhead flow controller Manufacturer Irritec   Dimensions Solenoid Valve Irritec VTN Series 1" 3 way with 24Vac manifold with flow control: : Height 126,35 mm - Length 112,5 mm - Width 100,00 mm   Click to download: Technical data sheet Irritec Series VTN 1" 3 ways solenoid valve with 24Vac manifold with flow control

GBP 57.36
1

Irritec Solenoid Valve VTN 1" 9VDC Latch 3 ways

Irritec Solenoid Valve VTN 1" 9VDC Latch 3 ways

VTN Series solenoid valves are a combination of the reliability derived from the VPN series and unique innovation. VTNs are "through-hole" solenoid valves that assemble to the manifold without the need for additional fittings, Teflon or tools. They are manually screwed together in series by means of the 1" female threaded swivel nut with O-R seal and the 1" male thread. It is possible to assemble a large number of solenoid valves in series, however it is recommended to assemble a maximum of 24 solenoid valves in series per manifold. At the outlet of the solenoid valve with 1" female swivel nut it is necessary to insert a compression fitting to connect the sector pipe. This simple process speeds up the installation enormously, guaranteeing a compact manifold thanks to which it is possible to concentrate in the well also the compression fittings at the exit of the solenoid valves allowing an easy and comfortable maintenance. VTN has the same dimensions as most tees and manifolds on the market.   Solenoid Valve Irritec VTN Series available in 1" size in 24 Vac and 9 Vdc latch versions (for battery systems).   Features Solenoid Valve Irritec Series VTN 1" 3-way with 9VDC Latch manifold with flow control Port: 1" F/M/F Power supply: 9 VDC Latch Valve body in polyamide - 30% glass fiber NBR membrane (Buna-N) 2 Swivel 1" polypropylene ferrules with O-ring seals (nozzles) Working pressure 0,5 - 10 bar Fluid temperature max 60 °C Installation in any position Manual opening 45° rotation of the solenoid Watertight solenoid IP 67 Inrush/speed absorption 330-210 mA Stainless steel core WRAS approval Flow Control: SI Overhead flow controller Manufacturer Irritec   Dimensions Solenoid Valve Irritec VTN Series 1" 3-way with manifold 9VDC Latch with flow control: : Height 126,35 mm - Length 112,5 mm - Width 100,00 mm   Click to download: Data sheet of solenoid valve Irritec Series VTN 1" 3 ways with 9VDC Latch manifold with flow control

GBP 80.40
1

ISE Manifold Kit with 24V Solenoid Valves

ISE Manifold Kit with 24V Solenoid Valves

2/3/4-way manifold kit for connection of lines on irrigation systems, including solenoid valves Hunter 24V. for current controllers and pipe fittings at the outlet for diameter 32. Kit composed of - N°1 2/3/4-way manifold 1" Pvc - N°4 Solenoid valves Hunter 1" M./M. 24V. A.C. PGV101M - N°1 1" F. polypropylene cap - N°4 Fittings diameter 32 x 1" Female with o-ring   2/3/4-way manifold 1" PVC: The Lasco PVC manifold system allows you to connect the valves to the flow pipes without cutting or adding new parts parts due to the sliding "valve connection"   Features 2/3/4-Way Manifold 1" PVC: - Faster, Teflon-free assembly of valves in assembly - sliding "valve connection" without the need to add new parts - Finished with large O-rings that ensure no dripping - Not for use in compressed air or C-gas piping systems - Application: Garden Irrigation   Specifications 2/3/4-Way Manifold 1" PVC: Thread: 1" Working pressure: 10.0 bar For valves with female thread Do not use products harmful to PVC   Solenoid valve Hunter 1" M./M. 24V. A.C.: This valve offers the best features of the top of the line valves Hunter. Built with the ruggedness to handle the rigors of most residential and commercial sites, all models feature solid construction and a rugged diaphragm made of memory-free materials to prevent stress failures.   Features Solenoid Valve Hunter 1" M./M. 24V. A.C.: 1" (25 mm.) in-line plastic valve with flow regulator, male x male (BSP) threads Application: Residential and small commercial users Size: 1" External manual purge and solenoid allow for quick and easy manual opening Solid design with 4 screws for maximum strength Durable dual ball diaphragm for superior performance Bistable 9 VDC solenoids allow operation with battery-powered Hunter controllers Captive lid screws provide trouble-free valve maintenance Flow regulator allows use in micro irrigation applications 24 Vac encapsulated solenoid with captive plunger for trouble-free maintenance Maximum temperature: 66° C Fine-tuning the flow and pressure for each zone maximizes efficiency and extends system life. The new Accu-Sync™ pressure regulator from Hunter adjusts solenoid valve outlet pressure independently of inlet pressure to ensure sprinklers operate at optimum operating pressure for significant water savings. Recycled Water Identification Knob: Purple knobs and labels are an option for a clean, quick and easy way to identify non-potable water use.   Operating Specifications Solenoid Valve Hunter 1" M./M. 24V. AC: - Flow rate PGV-101: 0.05 to 9 m3/hour 0.7 to 150 l/min - Pressure: 1.4 to 10.3 bar; 138 to 1,034 kPa   Solenoid Specifications Solenoid Valve Hunter 1" M./M. 24V. AC: Heavy Duty Solenoid 24 Vac: Heavy Duty Solenoid 24 Vac: Inrush current 370 mA, holding current 190 mA, 60 Hz Inrush Current 475 mA, Holding Current 230 mA, 50 Hz   Solenoid Valve Dimensions Hunter 1" M./M. 24V. AC: - 25 mm (1") inline and male x male (H x W x D): 13 cm x 11 cm x 6 cm   Click to download: Solenoid Valve Card Hunter 1" M./M. 24V. AC Instructions Solenoid Valve Hunter 1" M./M. 24V. BC   Polypropylene 1" F. cap: Article 609 Low pressure fitting Threaded 1" female   Fitting diameter 32 x 1" Female with o-ring: Article 425 Sleeve with o-ring/compression fitting Size 1 "x32 Material Polypropylene

GBP 214.80
1