parallel pen from GBP 55 | See the cheapest prices and offers on Cobiro CSS.com

Dl5 parallel beam booster for godox s60 and s60bi

The GODOX DL5 Parallel Beam Booster is designed for use with the Godox S60 and S60Bi Focusable LED Video lights. it produces a precise, parallel beam of light, significantly boosting light efficiency whilst producing powerful, cinema-grade illumination. With its Narrow 5° Beam, the DL5 Parallel Beam Booster is the perfect companion to the KNOWLED LiteFlow Cine-Reflector System (available separately), which makes it the perfect accessory for Cinematographers, Gaffers and DPs who use the Godox S60-Series LED lights as well as the LiteFlow System.

GBP 375.00

1

Knowled dl5-lite collapsible parallel beam booster for knowled ms60bi and ms60r

The GODOX DL5-Lite Parallel Beam Booster is designed for use with the Godox KNOWLED MS60Bi and MS60R Compact LED Video lights. When Paired with the SZL2 Zoom Lens (available Separately), it produces a precise, parallel beam of light, significantly boosting light efficiency By Up to 50-times, while producing powerful, cinema-grade illumination. With its Narrow 5° Beam, the DL5-Lite Parallel Beam Booster is the perfect companion to the KNOWLED LiteFlow Cine-Reflector System (available separately), which makes it the perfect accessory for Cinematographers, Gaffers and DPs who use the KNOWLED MS60-Series LED lights as well as the LiteFlow System.

GBP 54.99

1

Knowled beamlight s20 parallel-beam hyper reflector for knowled ms-series

The GODOX BeamLight S20 is a Parallel-Beam Hyper Reflector, designed for use with KNOWLED MS-Series LED Light fixtures. With its cutting-edge optical design, the BeamLight S20 produces a 5° near-parallel beam of light, minimising light fall-off and enabling you to throw light over greater distances. It also significantly increases the effective light output from your light source, giving you more flexibility. This makes it perfect for replicating natural sunlight over long distances. The GODOX BeamLight S20 is perfect for Cinematographers, Gaffers and DPs looking to get the most out of their Godox MS-Series Compact LED Cine lights.

GBP 76.00

1

Knowled beamlight max60 cinema-grade parallel-beam light reflector (godox g-mount fitting)

The GODOX KNOWLED BeamLight Max60 is a Cinema-Grade Parallel-Beam Lighting Reflector, designed for use with Godox G-Mount fitting lighting Fixtures such as the KNOWELD MG1200Bi, and the MG1200R Cine Lights. With its cutting-edge optical design, the BeamLight Max60 produces a 5° near-parallel beam of light, minimising light fall-off and enabling you to throw light over greater distances. It also significantly increases the effective light output from your light source, giving you more flexibility. This makes it perfect for replicating natural sunlight over long distances. The GODOX BeamLight Max60 is perfect for Cinematographers, Gaffers and DPs looking to get the most out of their Godox G-Mount LED Cine lights.

GBP 1325.00

1

Knowled beamlight b60 cinema-grade parallel-beam light reflector (bowens s-type fitting)

The GODOX KNOWLED BeamLight Max60 is a Cinema-Grade Parallel-Beam Lighting Reflector, designed for use with the KNOWLED M600R Cine Lights. With its cutting-edge optical design, the BeamLight Max60 produces a 5° near-parallel beam of light, minimising light fall-off and enabling you to throw light over greater distances. It also significantly increases the effective light output from your light source, giving you more flexibility. This makes it perfect for replicating natural sunlight over long distances. The GODOX BeamLight Max60 is perfect for Cinematographers, Gaffers and DPs looking to get the most out of their Godox M600R LED Cine lights. The GODOX KNOWLED BeamLight B60 is an essential accessory for Cinematographers, Gaffers, and DPs who are looking for a cost-effective solution for greatly enhancing the brightness, and light-throwing ability of their Godox KNOWLED M600Rs. Whether you would like to illuminate a large area or illuminate your movie set from a great distance, the BeamLight B60 will enable you to achieve this with ease.

GBP 1325.00

1

Knowled beamlight max90 cinema-grade parallel-beam light reflector (godox g-mount fitting)

The GODOX KNOWLED BeamLight Max90 is a Cinema-Grade Parallel-Beam Lighting Reflector, designed for use with Godox G-Mount fitting lighting Fixtures such as the KNOWELD MG1200Bi, and the MG2400Bi Cine Lights. Wit its cutting-edge optical design, the BeamLight Max90 produces a 5° near-parallel beam of light, minimising light fall-off enabling you to throw light over greater distances. It also significantly increases the effective light output from your light source, giving you more flexibility. This makes it perfect for replicating natural sunlight over long distances. the GODOX BeamLight Max90 is perfect for Cinematographers, Gaffers and DPs who are looking to get the most out of their Godox G-Mount LED Cine lights. The GODOX KNOWLED BeamLight Max90 is an essential accessory for Cinematographers, Gaffers, and DPs who are looking for a cost-effective solution for greatly enhancing the brightness, and light -throwing ability of their Godox G-Mount Cine Lights. Whether you would like to illuminate a large area or to illuminate your movie set from a great distance the BeamLight Max90 will enable you will enable you achieve this with the greatest of ease.

GBP 7119.00

1

351 mighty runway base stand with 99cm extended leg (special order)

The Kupo 351 Mighty Runway Stand Base is a compact yet robust studio light stand solution made from High-Strength Chrome-Plated Steel. With a height of only 26cm, the Runway bas stand enables you to mount your lights close to the ground, perfect for times when you need to hide a light fixture behind a part of the set. Sporting a 1-1/8" (28mm) junior-pin receiver, it also accepts the centre column from a C-Stand, converting it into a mobile rolling stand. It also features integrated caster wheels with brakes, enabling you to manoeuvre your lighting around the set with ease. When not in use, the legs fold parallel to each other, making storage and transportation a hassle-free experience.

GBP 123.99

1

Medium junior runway low base stand

The Pixapro Medium Junior Runway Low Base Stand is a compact yet robust studio light stand solution made from High-Strength Stainless Steel. With a height of only 15cm, the Runway bas stand enables you to mount your lights close to the ground, perfect for times when you need to hide a light fixture behind a part of the set. Sporting a 1-1/8" (28mm) junior-pin receiver, it can be used with larger cinema-grade and broadcast lights. It also accepts the centre column from a C-Stand, converting it into a mobile rolling stand. Featuring integrated caster wheels with brakes, it enables you to manoeuvre your lighting around the set with the greatest of ease. When not in use, the legs fold parallel to each other, making storage and transportation a hassle-free experience.

GBP 99.99

1

Large junior runway low base stand

The Pixapro Large Junior Runway Low Base Stand is a compact yet robust studio light stand solution made from High-Strength Stainless Steel. With a height of only 15cm, the Runway base stand enables you to mount your lights close to the ground, perfect for times when you need to hide a light fixture behind a part of the set. Sporting a 1-1/8" (28mm) junior-pin receiver, it can be used with larger cinema-grade and broadcast lights. It also accepts the centre column from a C-Stand, converting it into a mobile rolling stand. Featuring integrated caster wheels with brakes, it enables you to manoeuvre your lighting around the set with the greatest of ease. When not in use, the legs fold parallel to each other, making storage and transportation a hassle-free experience.

GBP 109.99

1

350 silver chrome steel runway base stand with junior-pin receiver (special order)

The Kupo Runway Stand Base is a compact yet robust studio light stand solution made from High-Strength Chrome-Plated Steel. With a height of only 26cm, the Runway bas stand enables you to mount your lights close to the ground, perfect for times when you need to hide a light fixture behind a part of the set. Sporting a 1-1/8" (28mm) junior-pin receiver, it also accepts the centre column from a C-Stand, converting it into a mobile rolling stand. It also features integrated caster wheels with brakes, which enables you to manoeuvre your lighting around the set with the greatest of ease. When not in use, the legs fold parallel to each other, making storage and transportation a hassle-free experience. The Kupo Runway Stand Base is the perfect solution for photographers and videographers, DPs and Gaffers who are looking for a heavy-duty floor stand which enables them to place their light fixtures close to the ground. With its chrome-plated steel construction and high maximum load capacity, the Kupo Runway Stand Base is great for use for both studio and location work.

GBP 104.99

1

Brand

Merchant

Price (EUR)