rb2191 901/58 from GBP 2 | See the cheapest prices and offers on Cobiro CSS.com

SAS NET218Key 901 Key

SAS NET218Key 901 KeyThe NET218Key is a 901 Key.

GBP 2.44

1

STI STI-C049-901 2 Spare Keys For Stopper Key 901

STI STI-C049-901 2 Spare Keys For Stopper Key 9012 replacement keys for Stopper Key 901.

GBP 13.02

1

Fireclass 2501059FC 901 Key for Control Enable

Fireclass 2501059FC 901 Key for Control EnableThe 901 Enable key controls access for all Fireclass Addressable Enable control panels.

GBP 6.50

1

Advanced LXP-901 Line Driver Module Pulse Protocol

Advanced LXP-901 Line Driver Module Pulse ProtocolTheLXP-901 is a Line Driver Module Pulse Protocol.

GBP 229.13

1

STI KIT-901 Thermostat Spacer - 50mm

STI KIT-901 Thermostat Spacer - 50mmThe STI KIT-901 50mm Thermostat Spacer accommodates surface mounted applications and provides an additional 50mm depth.Key Features50mm conduit spacerAccommodates surface mounted applicationsProvides an additional 50mm depth

GBP 17.76

1

Carrier DF205 ltraLink Link Extension Cable 58 cm 23 in

Carrier DF205 ltraLink Link Extension Cable 58 cm 23 inAnltraLink Link Extension Cable.Key Features58 cm 23 in

GBP 105.47

1

Gent S4-901 CO Dual Optical Heat Sensor

Gent S4-901 CO Dual Optical Heat SensorA new concept in fire detection a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimising the risk of false alarms.Key FeaturesThe multi-sensor combines heat H carbon monoxide CO optical forward scatter OFS and optical backward scatter OBSThe patented dual angle optical scatter technology allows identification of the particle source filtering potential false alarms due to steam and dustThe gas sensing element CO within the chamber monitors the concentration of carbon monoxide a product of incomplete combustion in some fire types and potentially life threatening. The CO sensor allows rapid fire detection with smouldering fires in areas where smoke detectors could register false alarmsCombined CO gas sensing with dual angle optical and heat allows a higher level of false alarm immunity whilst still improving the detection speed of certain types of fireEach sensor element has sensitivity settings which can be adjusted to suit the environment application and can be programmed for different time periods during the day or nightRepeat fire LED output as standard if monitored input not usedOperational LED blink OnOff optionMonitored Input - which can be Fire Fault or Supervisory

GBP 116.35

1

Morley Spare Key Switch and Keys 020-835

Morley Spare Key Switch and Keys 901 020-835Spare key switch and keys 901 for Morley repeaters 709-601-001.

GBP 26.71

1

Notifier ECO1005TA ECO 58 Fixed Temperature Detector

Notifier ECO1005TA ECO 58 Fixed Temperature DetectorThe ECO1005T A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005T A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. kitchensKey FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A2SApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 20.20

1

System Sensor Agile Wireless 58 Fixed Temperature Heat Detector 52051E-RF

System Sensor Agile Wireless 58 Fixed Temperature Heat Detector 52051E-RFThese heat sensors are battery operated RF devices designed for use with the M200G-RF radio gateway. They contain a wireless transceiver and run on an addressable fire system using a compatible proprietary communication protocol. The 52051E-RF provides fixed 58oC temperature sensing A1S. The 52051RE-RF provides 58oC rate-of-rise 10oCminute temperature sensing A1R. The sensors plug into the B501RF wireless base. These devices conform to EN54-25 and EN54-5 classes A1S and A1R. They comply with the requirements of 201453EU for conformance with the RED directive.

GBP 187.96

1

Notifier Agile Fixed 58 Temperature Heat Detector NRX-TFIX58

Notifier Agile Fixed 58 Temperature Heat Detector NRX-TFIX58Wireless fixed temperature 58c heat detector for the Notifier Agile wireless system. Powered by 4 x CR123A 3v batteriesAbout AgileThe Agile Wireless Fire Detection and Alarm System is a platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The look and feel of our wired fire devices combined with cutting edge wireless mesh network technology delivers superior performance when compared to traditional wireless star network technologies.Agile FeaturesMesh multiple communication paths for increased reliability18RF channels at 868MHz - provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of sensor headWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind - battery redundancy delivering always on performanceLoop powered Gateway reduced installation cost and timeUp to 8 Gateways per loopUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnosticsHighly adaptive and flexible features that effectively meet the needs of diverse applications from mainstream to more challenging sites.

GBP 232.81

1

Kentec K13520M10 Extinguishant Extract Key Switch Unit

Kentec K13520M10 Extinguishant Extract Key Switch UnitThe K13520M10 Extract unit provides a convenient and secure means to operate extract fan plant associated with the fire protection extinguishing system. The 901 key is common to many fire detection and protection control panels and is retained in the operated position. The robust enclosure allows for either surface mounting or flush with optional collar.Key FeaturesCommon 901 key switchKey trapped in operated positionCompatible with all Sigma XT and Sigma XT modelsRobust steel surface mount enclosureFlush mount collar available

GBP 96.40

1

Kentec Main Reserve Duty Extinguishant Key Switch Unit K13480M10

Kentec K13480M10 Main Reserve Duty Extinguishant Key Switch UnitThe K13480M10 Main Reserve switch provides a convenient and secure means to operate a switch to reserve extinguishing system agent where such provision is made as a back up to the main agent. The 901 key is common to many fire detection and protection control panels and is removable in either position. The robust enclosure allows for either surface mounting or mounting to a single gang flush box.Key FeaturesCommon 901 keyswitchKey unretainedCompatible with Sigma XT and Sigma XT modelsRobust steel enclosureSurface or single gang flush mounted

GBP 99.16

1

Notifier Fixed Temperature 58 Deg. Heat Detector NFXI-TFIX58 - White

Notifier Fixed Temperature 58 Deg. Heat DetectorThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 58.40

1

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - Ivory

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device.For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers. The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 97.34

1

System Sensor 52051RE-26 Rate of Rise 58C Heat Detector

System Sensor 52051RE-26 Rate of Rise 58C Heat DetectorThe 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 53.02

1

Morley IAS MI-RHSE-S2 Rate of Rise Heat Detector 58C

Morley IAS MI-RHSE-S2 Rate of Rise Heat Detector 58CThe MI-RHSE-S2 uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10C minute typical or if the temperature exceeds a threshold of 58C Response Class A1R.With the implementation of the Advanced Protocol any model can be software configured to be either a fixed 58 a fixed 78 unit or a 58 with rate of rise device. For backwards compatibility and approval continuity.Key FeaturesTri colour LED offering red green and amber colourRotary decade address switches 0 - 159Pure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityNew base design to complement the detector

GBP 40.16

1

Morley IAS MI-RHSE-S2I Rate of Rise Heat Detector 58C with Isolator

Morley IAS MI-RHSE-S2I Rate of Rise Heat Detector 58C with IsolatorThe MI-RHSE-S2 uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10C minute typical or if the temperature exceeds a threshold of 58C Response Class A1R.With the implementation of the Advanced Protocol any model can be software configured to be either a fixed 58 a fixed 78 unit or a 58 with rate of rise device. For backwards compatibility and approval continuity.Key FeaturesTri colour LED offering red green and amber colourRotary decade address switches 0 - 159Pure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityNew base design to complement the detector

GBP 43.23

1

System Sensor 52051E-26 Fixed 58C Heat Detector

System Sensor 52051E-26 Fixed 58C Heat DetectorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 45.38

1

System Sensor 52051EI-26 Fixed 58C Heat Detector with Isolator

System Sensor 52051EI-26 Fixed 58C Heat Detector with IsolatorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 60.59

1

System Sensor 52051HTE-26 High Temperature Fixed 78C Heat Detector

System Sensor 52051HTE-26 High Temperature Fixed 78C Heat DetectorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 53.02

1

Conventional Standard Base - 2020B

Conventional Standard Base - 2020BThere are 2 bases from the conventional fire alarm equipment range2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 6.95

1

Conventional Standard Base with Schottky Diode - 2020BSD

Conventional Standard Base with Schottky Diode - 2020BSDThere are 2 bases from the conventional fire alarm equipment range2020B Standard Base adds 9.5mm to detector height2020BSD Standard Base with Schottky diodeThe base is compatible with the following2020PT Multi-Function Detector2020P Optical Smoke Detector2020R Rate of Rise Heat Detector2020F 58 Celsius Fixed Temperature Heat Detector2020HF 70 Celsius Fixed Temperature Heat Detector

GBP 5.64

1

System Sensor 52051E-26-B Fixed 58C Heat Detector With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor 52051E-26-B Fixed 58C Heat Detector With BaseThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes B501AP baseIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector - included

GBP 30.84

1

STI SS3-1W04 Latching Button Dual Mount DPCO Red-White

STI SS3-1W04 Latching Button Dual Mount DPCO Red-WhiteA highly versatile range of attractive indoor Push Buttons combining unique design quality and value. These aesthetically appealing lowhigh voltage switches fit any standard UK-type switch socket box and are quick and easy to install.Key FeaturesEmergency Power OffButtonLatching Key-to-ResetDual MountMulti-Function Signal DPC SPCStandard Function MarkingFlush Mount Depth 23mm87 mm H x 87 mm W x 58 mm D

GBP 29.47

1

Brand

Merchant

Price (EUR)