1.414 results (0,13334 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Concrete Sealer Water Based 25L

Watco Concrete Sealer Water Based 25L

Images for illustration purposes onlyWatco Concrete Sealer Water Based seals and hardens new and old bare, porous concrete floors and screeds. It is micro-porous which allows the surface to breathe.Watco Concrete Sealer Water Based contains a micronised acrylic which penetrates deep into porous surfaces to bind, harden and seal. The cross linking properties of the acrylic dries to form a surface film, providing a more stain resistant, easier to clean finish. The appearance can vary from low sheen to gloss depending upon the porosity of the substrate and the number of coats applied. It is quick and easy to apply and most suited for use in warehouses and production areas, or anywhere which would benefit from a penetrative, dustproof, virtually odourless sealer for medium trafficked areas.Concrete Sealer Water Based is also available in a light grey finish, which both seals and tints the floor at the same time. Concrete Sealer Water Based is breathable, virtually solvent free and safe for use in confined areas. It has an A+ VOC emissions rating with a very low VOC content.Recommended areas of useWarehousesProduction AreasGaragesStorage roomsFeaturesClear, acrylic, water based sealerAlso available in a light grey tinted version to both seal and add colourPenetrates, dustproofs and hardens in just one coatSingle pack sealer easy to applyReady for full use after 24 hoursOnly one coat is generally needed saving on downtimeMinimal darkening effect on most surfacesBreathableVirtually solvent free and low odourGlossy finish stain resistant and easy to keep clean Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 8 hours 6 hours 12 hours 24 hours 20C 6 hours 4 hours 12 hours 24 hours 30C 6 hours 2 hour 12 hours 24 hours Light Traffic: Foot, trolley, pallet truck, occasional forkliftFull use: Regular forklift, heavy footfall, parked vehicles

GBP 399.99
1

Watco Safety Coat Coarse Leaf Green

Watco Safety Coat Coarse Leaf Green

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Epoxy Gloss Coat Leaf Green

Watco Epoxy Gloss Coat Leaf Green

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Safety Coat Hygienic Leaf Green

Watco Safety Coat Hygienic Leaf Green

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Epoxy Matt Coat Leaf Green

Watco Epoxy Matt Coat Leaf Green

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1

Watco Epoxy Gloss Coat Hygienic Leaf Green

Watco Epoxy Gloss Coat Hygienic Leaf Green

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 239.99
1

Watco Epoxy Matt Coat Hygienic Leaf Green

Watco Epoxy Matt Coat Hygienic Leaf Green

Images for illustration purposes only Watco Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Epoxy Gloss Coat Mid Green Leaf Green

Watco Epoxy Gloss Coat Mid Green Leaf Green

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Matt Coat Mid Green Leaf Green

Watco Epoxy Matt Coat Mid Green Leaf Green

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1

Watco Safety Coat Coarse Bef Mid Green Leaf Green

Watco Safety Coat Coarse Bef Mid Green Leaf Green

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Epoxy Gloss Coat Hygienic Mid Green Leaf Green

Watco Epoxy Gloss Coat Hygienic Mid Green Leaf Green

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Safety Coat Hygienic Bef Mid Green Leaf Green

Watco Safety Coat Hygienic Bef Mid Green Leaf Green

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Safety Coat Coarse Copper Brown

Watco Safety Coat Coarse Copper Brown

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Safety Coat Hygienic Copper Brown

Watco Safety Coat Hygienic Copper Brown

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Epoxy Matt Coat Copper Brown

Watco Epoxy Matt Coat Copper Brown

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1

Watco Epoxy Gloss Coat Copper Brown

Watco Epoxy Gloss Coat Copper Brown

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Matt Coat Hygienic Mid Green Leaf Green

Watco Epoxy Matt Coat Hygienic Mid Green Leaf Green

Images for illustration purposes onlyWatco Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 239.99
1

Watco Epoxy Gloss Coat Hygienic Copper Brown

Watco Epoxy Gloss Coat Hygienic Copper Brown

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Epoxy Matt Coat Hygienic Copper Brown

Watco Epoxy Matt Coat Hygienic Copper Brown

Images for illustration purposes onlyWatco Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 239.99
1

Watco Safety Coat Coarse Water Blue

Watco Safety Coat Coarse Water Blue

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Safety Coat Hygienic Water Blue

Watco Safety Coat Hygienic Water Blue

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1