copper leaf water feature from GBP 60 | See the cheapest prices and offers on Cobiro CSS.com

Tpi 9071 Smart Vibration Meter

A simple to use, low cost vibration meter that records, analyses and displays vibration signals on a colour screen at the push of a button. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. The fully dynamic cursor displays frequency and amplitude values. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, alignment and looseness. Readings are easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use set-up wizard.Size: 200 mm x 60mm x 26mm.Weight: 280g (not including magnet).Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C.Power supply: 2x AA batteries.Displayed frequency units: Hertz (Hz), RPM or CPM.Input range: +/- 50g.Dynamic range: 72 dB (0.05g resolution).VA diagnostic bands (RPM = run speed):Unbalance 1x RPM.Misalignment 2x RPM.Looseness 3x RPM.Accessories: screw in probe tip (1/4" UNF 28). Nylon carrying case.Options: accelerometer mounting magnet. Extended probe tip (stinger).

GBP 849.99

1

Tpi 9070 Smart Vibration Meter

A simple to use, low cost vibration meter that records, analyses and displays vibration signals on a colour screen at the push of a button. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. The fully dynamic cursor displays frequency and amplitude values. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, alignment and looseness. Readings are easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use set-up wizard.Size: 200 mm x 60mm x 26mm.Weight: 280g (not including magnet).Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C.Power supply: 2x AA batteries.Displayed frequency units: Hertz (Hz), RPM or CPM.Input range: +/- 50g.Dynamic range: 72 dB (0.05g resolution).VA diagnostic bands (RPM = run speed):Unbalance 1x RPM.Misalignment 2x RPM.Looseness 3x RPM.Accessories: screw in probe tip (1/4" UNF 28). Nylon carrying case.Options: accelerometer mounting magnet. Extended probe tip (stinger).

GBP 639.99

1

Tpi A9073 Accelorometer Magnet

A simple to use, low cost vibration meter that records, analyses and displays vibration signals on a colour screen at the push of a button. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. The fully dynamic cursor displays frequency and amplitude values. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, alignment and looseness. Readings are easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use set-up wizard. Size: 200 mm x 60mm x 26mm. Weight: 280g (not including magnet). Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries. Displayed frequency units: Hertz (Hz), RPM or CPM. Input range: +/- 50g. Dynamic range: 72 dB (0.05g resolution). VA diagnostic bands (RPM = run speed): Unbalance 1x RPM. Misalignment 2x RPM. Looseness 3x RPM. Accessories: screw in probe tip (1/4" UNF 28). Nylon carrying case. Options: accelerometer mounting magnet. Extended probe tip (stinger).

GBP 129.99

1

Tpi A9072 100mm Long Stinger

A simple to use, low cost vibration meter that records, analyses and displays vibration signals on a colour screen at the push of a button. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. The fully dynamic cursor displays frequency and amplitude values. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, alignment and looseness. Readings are easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use set-up wizard. Size: 200 mm x 60mm x 26mm. Weight: 280g (not including magnet). Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries. Displayed frequency units: Hertz (Hz), RPM or CPM. Input range: +/- 50g. Dynamic range: 72 dB (0.05g resolution). VA diagnostic bands (RPM = run speed): Unbalance 1x RPM. Misalignment 2x RPM. Looseness 3x RPM. Accessories: screw in probe tip (1/4" UNF 28). Nylon carrying case. Options: accelerometer mounting magnet. Extended probe tip (stinger).

GBP 73.99

1

Tpi 9080-Pro Smart Trend Meter

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer.Size: 200 x 60mm x 26mm.Weight: 280g (not including magnet).Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries.Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).Displayed frequency units: Hertz (Hz), RPM or CPM.Input auto range: +/- 50g or +/- 5gDynamic range: 96dB (0.002g resolution)VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case.Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.

GBP 1399.99

1

Tpi 9080 Standard Smart Trend Meter

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer.Size: 200 x 60mm x 26mm.Weight: 280g (not including magnet).Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries.Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).Displayed frequency units: Hertz (Hz), RPM or CPM.Input auto range: +/- 50g or +/- 5gDynamic range: 96dB (0.002g resolution)VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case.Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.

GBP 1399.99

1

Tpi A9083 Carry Case

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer. Size: 200 x 60mm x 26mm. Weight: 280g (not including magnet). Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries. Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting. Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units). Displayed frequency units: Hertz (Hz), RPM or CPM. Input auto range: +/- 50g or +/- 5g Dynamic range: 96dB (0.002g resolution) VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM. Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case. Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.

GBP 69.99

1

Tpi A9012 Bnc Accelorometer

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer. Size: 200 x 60mm x 26mm. Weight: 280g (not including magnet). Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries. Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting. Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units). Displayed frequency units: Hertz (Hz), RPM or CPM. Input auto range: +/- 50g or +/- 5g Dynamic range: 96dB (0.002g resolution) VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM. Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case. Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.

GBP 229.99

1

Tpi A9086 Rubber Boot

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer. Size: 200 x 60mm x 26mm. Weight: 280g (not including magnet). Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries. Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting. Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units). Displayed frequency units: Hertz (Hz), RPM or CPM. Input auto range: +/- 50g or +/- 5g Dynamic range: 96dB (0.002g resolution) VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM. Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case. Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.

GBP 59.99

1

Brand

Colour

Size

Merchant

Price (EUR)