atlantic dulse benefits from GBP 95 | See the cheapest prices and offers on Cobiro CSS.com

PSKNL 3232 P 15 External Turning Holder Left Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 15.875mm, and a thickness of 6.35mm. 32mm tool height x 32mm width x 170mm long for face turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 129.99

1

PSKNR 3232 P 15 External Turning Holder Right Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 15.875mm, and a thickness of 6.35mm. 32mm tool height x 32mm width x 170mm long for face turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 129.99

1

10x SDMT 13T3AFSN-R M8310 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

PSBNL 4040 S 2512 External Turn Holder Left Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 25.4mm, and a thickness of 12mm. 40mm tool height x 40mm width x 250mm long for taper turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 169.99

1

10x SDMT 13T3AFSN-R M5315 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-M M8340 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-M M6330 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-M M9340 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-R M8330 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-M M9325 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-M 8215 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 94.90

1

10x SDMT 13T3AFSN-M M8330 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SDMT 13T3AFSN-R M8340 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SNMX 170508SR-M 8215 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 149.90

1

10x SDMT 13T3AFSN-R M9325 SD13 45 Face Mill Insert

SDMT is a double-sided square milling insert with a maximum depth of cut of 6.4mm. This milling insert was designed for the machining of steel and cast steel, with face mills SSD13F, and features PVD coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel High-temperature alloys

GBP 99.90

1

10x SNMX 170508SR-R 8215 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 149.90

1

PSBNR 4040 S 2512 External Turn Holder Right Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 25.4mm, and a thickness of 12mm. 40mm tool height x 40mm width x 250mm long for taper turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 169.99

1

KITXLCFN-32-3-T8330 Blade and Holder Parting (KIT-10)

The Pramet Blade and Holder Parting Kit is designed to improve your lathe machining capabilities by offering a range of replacement blades. Engineered for versatility, the kit includes specialized blades and holders for parting and grooving tasks. Suitable for metalworking, fabrication and manufacturing, this kit empowers your cutting operations with precision and ease. Features and Benefits Ideal for radial parting and grooving operations Engineered for versatility and reliability

GBP 149.99

1

KITXLCFN-26-3-T8330 Blade and Holder Parting (KIT-10)

The Pramet Blade and Holder Parting Kit is designed to improve your lathe machining capabilities by offering a range of replacement blades. Engineered for versatility, the kit includes specialized blades and holders for parting and grooving tasks. Suitable for metalworking, fabrication and manufacturing, this kit empowers your cutting operations with precision and ease. Features and Benefits Ideal for radial parting and grooving operations Engineered for versatility and reliability

GBP 149.99

1

PRSNL 4040 S 19 External Turning Holder Left Hand

These turning toolholders were designed to hold a round negative insert with a diameter of 19.05mm, and a thickness of 6.35mm. 40mm tool height x 40mm width x 250mm long for taper turning, single and multi-directional copy turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 169.99

1

KITXLCFN-26-3-M2-T8330 Blade and Holder Parting (KIT-10)

The Pramet Blade and Holder Parting Kit is designed to improve your lathe machining capabilities by offering a range of replacement blades. Engineered for versatility, the kit includes specialized blades and holders for parting and grooving tasks. Suitable for metalworking, fabrication and manufacturing, this kit empowers your cutting operations with precision and ease. Features and Benefits Ideal for radial parting and grooving operations Engineered for versatility and reliability

GBP 159.99

1

KITXLCFN-32-4-T8330 Blade and Holder Parting (KIT-10)

The Pramet Blade and Holder Parting Kit is designed to improve your lathe machining capabilities by offering a range of replacement blades. Engineered for versatility, the kit includes specialized blades and holders for parting and grooving tasks. Suitable for metalworking, fabrication and manufacturing, this kit empowers your cutting operations with precision and ease. Features and Benefits Ideal for radial parting and grooving operations Engineered for versatility and reliability

GBP 149.99

1

Stacl 1212 K 11-S External Turn Holder Left Hand

These turning tool holders were designed to hold a triangular positive insert with an inscribed circle diameter of 6.35mm, and a 2.38mm thickness. 12mm tool height x 12mm width x 125mm long for taper turning, and longitudinal turning without shoulder.Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliabilityTypical Applications Steel Cast Steel

GBP 99.99

1

Stacl 1616 K 11-S External Turn Holder Left Hand

These turning tool holders were designed to hold a triangular positive insert with an inscribed circle diameter of 6.35mm, and a 2.38mm thickness. 12mm tool height x 12mm width x 125mm long for taper turning, and longitudinal turning without shoulder.Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliabilityTypical Applications Steel Cast Steel

GBP 99.99

1

PSBNR 3232 P 15 External Turning Holder Right Hand

This turning toolholder was designed to hold a square negative insert with an inscribed circle diameter of 15.875mm, and a thickness of 6.35mm. The toolholder is right-handed. 32mm tool height x 32mm width x 170mm long for taper turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 129.99

1

Brand

Merchant

Price (EUR)

PSKNL 3232 P 15 External Turning Holder Left Hand

PSKNR 3232 P 15 External Turning Holder Right Hand

10x SDMT 13T3AFSN-R M8310 SD13 45 Face Mill Insert

PSBNL 4040 S 2512 External Turn Holder Left Hand

10x SDMT 13T3AFSN-R M5315 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M M8340 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M M6330 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M M9340 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-R M8330 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M M9325 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M 8215 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-M M8330 SD13 45 Face Mill Insert

10x SDMT 13T3AFSN-R M8340 SD13 45 Face Mill Insert

10x SNMX 170508SR-M 8215 ON06 43 Face Mill Insert

10x SDMT 13T3AFSN-R M9325 SD13 45 Face Mill Insert

10x SNMX 170508SR-R 8215 ON06 43 Face Mill Insert

PSBNR 4040 S 2512 External Turn Holder Right Hand

KITXLCFN-32-3-T8330 Blade and Holder Parting (KIT-10)

KITXLCFN-26-3-T8330 Blade and Holder Parting (KIT-10)

PRSNL 4040 S 19 External Turning Holder Left Hand

KITXLCFN-26-3-M2-T8330 Blade and Holder Parting (KIT-10)

KITXLCFN-32-4-T8330 Blade and Holder Parting (KIT-10)

Stacl 1212 K 11-S External Turn Holder Left Hand

Stacl 1616 K 11-S External Turn Holder Left Hand

PSBNR 3232 P 15 External Turning Holder Right Hand