26 results (0,13379 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Synspark FX High Performance Synthetic EDM Fluid 205L

Synspark FX High Performance Synthetic EDM Fluid 205L

Pennine Synspark FX is a high performance synthetic dielectric fluid for use in Electrical Discharge Machines. It offers extended fluid life over conventional fluids due to its inherently superior oxidation stability. Other benefits include low evaporation/volatility, rapid flushing due to low viscosity, rapid separation of fines, extremely low odour, good operator acceptability and good visibility. Applications Synspark FX is suitable for roughing through to fine finishing spark erosion operations.

GBP 899.99
1

Metacut CF General Purpose Neat Cutting Oil 205L

Metacut CF General Purpose Neat Cutting Oil 205L

Pennine Metacut CF is a pale coloured non-corrosive multipurpose neat cutting oil. Manufactured from highly refined mineral oil and incorporating non staining extreme pressure additives and lubricity agents it is suitable for the machining of both ferrous and non-ferrous metals. Applications Metacut CF is suitable for a wide range of machining operations on both ferrous and non-ferrous metals, including yellow metals. It offers good surface finish and tool life. Metacut CF may also be used in non-critical low pressure hydraulic systems. Features & Benefits Pale coloured ~ Excellent work piece visibility Excellent lubricity ~ Promotes improved tool life Low odour ~ Improved operator acceptability

GBP 659.99
1

Metacut CF General Purpose Neat Cutting Oil 1000L IBC

Metacut CF General Purpose Neat Cutting Oil 1000L IBC

Pennine Metacut CF is a pale coloured non-corrosive multipurpose neat cutting oil. Manufactured from highly refined mineral oil and incorporating non staining extreme pressure additives and lubricity agents it is suitable for the machining of both ferrous and non-ferrous metals. Applications Metacut CF is suitable for a wide range of machining operations on both ferrous and non-ferrous metals, including yellow metals. It offers good surface finish and tool life. Metacut CF may also be used in non-critical low pressure hydraulic systems. Features & Benefits Pale coloured ~ Excellent work piece visibility Excellent lubricity ~ Promotes improved tool life Low odour ~ Improved operator acceptability

GBP 3199.99
1

Pengrind GR Full Synthetic Grinding Fluid 205L

Pengrind GR Full Synthetic Grinding Fluid 205L

Pennine Pengrind GRis a full synthetic nitrite free grinding fluid which mixes readily with water formingtransparent stable solutions. The product is an oil free concentrated chemical grinding fluid withexcellent wetting properties to provide superior cooling and flushing and to ensure that grinding wheelsdo not clog or glaze. Pengrind GR is low odour with very low foaming characteristics and excellent anticorrosion properties.ApplicationsPennine Pengrind GR is recommended for surface grinding, cylindrical grinding, centreless grinding, and tool and cutter grinding on mainly cast iron and ferrous feedstocks.Features & Benefits Transparent solution ~ Excellent workpiece visibility Highly biostable ~ Extended sump life/fewer fluid changes Excellent tramp oil rejection ~ Maintains fluid cleanliness Excellent corrosion protection ~ Protects machines & workpieces Chlorine free ~ Reduced waste disposal costs

GBP 899.99
1

Standard Quenching Oil 32 205L

Standard Quenching Oil 32 205L

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 449.99
1

Metacut CX High Performance Neat Cutting Oil 1000L IBC

Metacut CX High Performance Neat Cutting Oil 1000L IBC

Pennine Metacut CX is a pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining extreme pressure additives, lubricity agents, antioxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut CX is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Excellent lubricity ~ Promotes improved tool life Highly effective anti-mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 2399.99
1

Standard Quenching Oil 22 1000L IBC

Standard Quenching Oil 22 1000L IBC

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 1999.99
1

Standard Quenching Oil 32 1000L IBC

Standard Quenching Oil 32 1000L IBC

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 1999.99
1

Accelerated Quenching Oil 22 Ac 1000L IBC

Accelerated Quenching Oil 22 Ac 1000L IBC

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 2499.99
1

Metacut CX High Performance Neat Cutting Oil 205L

Metacut CX High Performance Neat Cutting Oil 205L

Pennine Metacut CX is a pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining extreme pressure additives, lubricity agents, antioxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut CX is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Excellent lubricity ~ Promotes improved tool life Highly effective anti-mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 529.99
1

Accelerated Quenching Oil 22 Ac 205L

Accelerated Quenching Oil 22 Ac 205L

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 539.99
1

Standard Quenching Oil 22 205L

Standard Quenching Oil 22 205L

Pennine Quenching Oils are developed for the conventional and accelerated heat treatment of carbon alloy steels. Manufactured from low viscosity solvent refined mineral oil, they have excellent resistance to oxidation and good water shedding properties. Applications "22" and "32" grades are recommended for conventional oil quenching where the majority of hardening operations will be satisfied. 22 AC/M and 32 AC/M are partially accelerated quenching oils offering a moderately improved cooling curve together with the benefits of excellent oxidation stability and lower internal stresses than the AC grades. These products are recommended for applications where a wide variety of steels are to be heat treated and a degree of rationalisation is required. "22AC" and "32AC" grades are high performance quench oils providing accurate degrees of hardness with minimum deformation whilst ensuring that components are free from surface staining. They endure the most severe operating conditions and offer excellent oxidation resistance, maintaining a stable performance throughout their long service life.

GBP 449.99
1

Ultrasol X-929 Boron Free Synthetic Grinding Fluid 205L

Ultrasol X-929 Boron Free Synthetic Grinding Fluid 205L

Pennine Ultrasol X products represent a range of boron and formaldehyde release biocide free new generation soluble metalworking fluids designed to comply with existing and pending REACh regulations offering the highest levels of health, safety and environmental compliance. Pennine Ultrasol X-929 is a full synthetic boron and formaldehyde release biocide free grinding fluid which produces a transparent solution when mixed with water offering excellent workpiece visibility. The product is an oil free concentrated chemical grinding fluid with excellent wetting properties providing superior cooling and flushing characteristics and ensures that grinding wheels do not clog or glaze. Ultrasol X-929 is low odour, very low foaming, provides excellent anti corrosion properties and reduced sticky residues. Applications Pennine Ultrasol X-929 is recommended for surface grinding, cylindrical grinding, centreless grinding, and tool and cutter grinding on both ferrous and non-ferrous materials, including yellow metals and aluminium alloys. Features & Benefits Transparent solution ~ Excellent workpiece visibility Highly biostable ~ Extended sump life/fewer fluid changes Excellent tramp oil rejection ~ Maintains fluid cleanliness Excellent corrosion protection ~ Protects machines & workpieces Boron & formaldehyde free ~ Excellent EHS profile

GBP 1199.99
1

Metacut PG Heavy Duty Gear Cutting & Broaching Oil 1000L IBC

Metacut PG Heavy Duty Gear Cutting & Broaching Oil 1000L IBC

Pennine Metacut PG is a neat cutting oil based on highly refined mineral oil incorporating extreme pressure additives along with high performance lubricity improvers and non-staining sulphur containing esters. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Applications The high performance potential of Metacut PG allows difficult materials to be machined on a wide range of machining operations such as gear cutting, deep hole boring, thread grinding, honing and broaching of difficult high tensile materials & stainless steels. It is also used in other operations such as sawing, tapping and threading and on multi-spindle automatics when machining demanding materials where a high performance fluid is required. Features & Benefits Pale coloured ~ Excellent work piece visibility Outstanding EP Performance ~ Promotes improved tool life Highly effective anti-mist package ~ Improved working environment Exceptional oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 3399.99
1

Metacut Ultra MD 22 High Performance Chlorine Free Neat Cutting Oil 205L

Metacut Ultra MD 22 High Performance Chlorine Free Neat Cutting Oil 205L

Pennine Metacut Ultra MD22 is a pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining chlorine free extreme pressure additives, lubricity agents, antioxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut Ultra MD22 is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the anti-oxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Excellent lubricity ~ Promotes improved tool life Highly effective anti mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability Chlorine free ~ Reduced disposal costs

GBP 699.99
1

Metacut PG Heavy Duty Gear Cutting & Broaching Oil 205L

Metacut PG Heavy Duty Gear Cutting & Broaching Oil 205L

Pennine Metacut PG is a neat cutting oil based on highly refined mineral oil incorporating extreme pressure additives along with high performance lubricity improvers and non-staining sulphur containing esters. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Applications The high performance potential of Metacut PG allows difficult materials to be machined on a wide range of machining operations such as gear cutting, deep hole boring, thread grinding, honing and broaching of difficult high tensile materials & stainless steels. It is also used in other operations such as sawing, tapping and threading and on multi-spindle automatics when machining demanding materials where a high performance fluid is required. Features & Benefits Pale coloured ~ Excellent work piece visibility Outstanding EP Performance ~ Promotes improved tool life Highly effective anti-mist package ~ Improved working environment Exceptional oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 699.99
1

Metacut Ultra MD 12 High Performance Chlorine Free Neat Cutting Oil 205L

Metacut Ultra MD 12 High Performance Chlorine Free Neat Cutting Oil 205L

Pennine Metacut Ultra MD12 is a low viscosity, pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines including those employing high pressure coolant delivery systems. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining chlorine free extreme pressure additives, lubricity agents, anti-oxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut Ultra MD12 is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals where a low viscosity product offering excellent oil penetration is required. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the anti-oxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Low Viscosity ~ Improved oil penetration Excellent lubricity ~ Promotes improved tool life Highly effective anti mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability Chlorine free ~ Reduced disposal costs

GBP 599.99
1

Metacut Ultra MD 22 High Performance Chlorine Free Neat Cutting Oil 1000L IBC

Metacut Ultra MD 22 High Performance Chlorine Free Neat Cutting Oil 1000L IBC

Pennine Metacut Ultra MD12 is a low viscosity, pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines including those employing high pressure coolant delivery systems. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining chlorine free extreme pressure additives, lubricity agents, anti-oxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut Ultra MD12 is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals where a low viscosity product offering excellent oil penetration is required. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the anti-oxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Low Viscosity ~ Improved oil penetration Excellent lubricity ~ Promotes improved tool life Highly effective anti mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability Chlorine free ~ Reduced disposal costs

GBP 3399.99
1

Metacut Ultra MD 12 High Performance Chlorine Free Neat Cutting Oil 1000L IBC

Metacut Ultra MD 12 High Performance Chlorine Free Neat Cutting Oil 1000L IBC

Pennine Metacut Ultra MD12 is a low viscosity, pale coloured, low odour, high performance multipurpose neat cutting oil specifically designed for use in modern high speed sliding head CNC lathes and multi-spindle machines including those employing high pressure coolant delivery systems. Manufactured from highly refined virgin mineral oil, the product incorporates non-staining chlorine free extreme pressure additives, lubricity agents, anti-oxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques. Applications Metacut Ultra MD12 is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals where a low viscosity product offering excellent oil penetration is required. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the anti-oxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. Features & Benefits Pale coloured ~ Excellent work piece visibility Low Viscosity ~ Improved oil penetration Excellent lubricity ~ Promotes improved tool life Highly effective anti mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability Chlorine free ~ Reduced disposal costs

GBP 2599.99
1

Metacut SM High Performance Neat Cutting Oil 1000L IBC

Metacut SM High Performance Neat Cutting Oil 1000L IBC

Pennine Metacut SM is a high performance, extreme pressure, low odour multipurpose neat cutting oil primarily designed for use in modern high speed sliding head CNC lathes where a low viscosity product is specified or desirable. Manufactured from highly refined virgin mineral oil, the product incorporates the very latest non-staining extreme pressure additives, lubricity agents, antioxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques on a wide variety of materials. Applications Metacut SM is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. The low viscosity characteristics of Metacut SM ensures excellent oil penetration and reduces oil drag out on machined components and swarf leading to reduced consumption and lowering overall costs. Features & Benefits Pale coloured ~ Excellent work piece visibility Extreme pressure performance ~ Promotes improved tool life Low viscosity ~ Reduced consumption Highly effective anti-mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 2599.99
1

Ultrasol X-777 Low Foam Semi Synthetic Soluble Oil for Soft Water 205L

Ultrasol X-777 Low Foam Semi Synthetic Soluble Oil for Soft Water 205L

Pennine Ultrasol X products represent a range of boron and formaldehyde release biocide free new generation soluble metalworking fluids designed to comply with existing and pending REACh regulations offering the highest levels of health, safety and environmental compliance. Ultrasol X-777 is a high performance semi synthetic water mix metalworking fluid that produces a semitranslucent micro emulsion when mixed with water. The product incorporates a unique combination of chlorine free extreme pressure additives providing outstanding machining performance and exhibits ultra low foaming properties in soft water and high pressure coolant systems. The boron free formulation ensures excellent machine cleanliness and significantly reduces built up sticky residues on hard surfaces. Applications Ultrasol X-777 offers high performance machining characteristics on a wide variety of tough ferrous and non-ferrous materials including titanium, aluminium (inc. 2000, 6000 & 7000 series) nickel alloys and copper alloys. Typical applications include heavy duty turning, milling, drilling, grinding, reaming and deep hole drilling where increased tool life and outstanding surface finish are desirable. Features & Benefits Formaldehyde release biocide free ~ Improved Health & Safety profile Highly biostable & robust emulsion ~ Extended sump life/fewer fluid changes Exceptional low foam properties ~ Reduced anti-foam additions Boron free ~ Reduced sticky residues & deposits Chlorine free ~ Improved environmental profile

GBP 1049.99
1

Metacut SM High Performance Neat Cutting Oil 205L

Metacut SM High Performance Neat Cutting Oil 205L

Pennine Metacut SM is a high performance, extreme pressure, low odour multipurpose neat cutting oil primarily designed for use in modern high speed sliding head CNC lathes where a low viscosity product is specified or desirable. Manufactured from highly refined virgin mineral oil, the product incorporates the very latest non-staining extreme pressure additives, lubricity agents, antioxidant and anti-mist additives making the product suitable for the rigorous demands of modern machining techniques on a wide variety of materials. Applications Metacut SM is suitable for a wide range of machining operations on high tensile steels, stainless steel, aluminium and its alloys and yellow metals. The light colour and anti-misting properties offer the user excellent work piece visibility along with an improved working environment and the antioxidant package eliminates sticky residues and lacquers forming even when employed under 24 hour lights out operations. The low viscosity characteristics of Metacut SM ensures excellent oil penetration and reduces oil drag out on machined components and swarf leading to reduced consumption and lowering overall costs. Features & Benefits Pale coloured ~ Excellent work piece visibility Extreme pressure performance ~ Promotes improved tool life Low viscosity ~ Reduced consumption Highly effective anti-mist package ~ Improved working environment Outstanding oxidation resistance ~ Eliminates lacquers & residues Low odour ~ Improved operator acceptability

GBP 599.99
1

Ultrasol X-535 Low Foam Semi Synthetic Soluble Oil for Hard Water 205L

Ultrasol X-535 Low Foam Semi Synthetic Soluble Oil for Hard Water 205L

Pennine Ultrasol X products represent a range of boron and formaldehyde release biocide free new generation soluble metalworking fluids designed to comply with existing and pending REACh regulations offering the highest levels of health, safety and environmental compliance. Ultrasol X-535 is a high performance, hard water stable semi synthetic water mix metalworking fluid that produces a semi-translucent micro emulsion when mixed with water. The product incorporates a unique combination of chlorine free extreme pressure additives providing outstanding machining performance and exhibits outstanding low foaming properties in high pressure coolant systems. The boron free formulation ensures excellent machine cleanliness and significantly reduces built up sticky residues on hard surfaces. Applications Ultrasol X-535 offers high performance machining characteristics on a wide variety of tough ferrous and non-ferrous materials including titanium, aluminium (inc. aero 2000, 6000 & 7000 series) nickel alloys and copper alloys. Typical applications include heavy duty turning, milling, drilling, grinding, reaming and deep hole drilling where increased tool life and outstanding surface finish are desirable. The product is suited for medium to hard make up waters where soap and scum formation may be problematic with conventional coolants. Features & Benefits Formaldehyde release biocide free ~ Improved Health & Safety profile Highly biostable & robust emulsion ~ Extended sump life/fewer fluid changes Exceptional low foam properties ~ Reduced anti-foam additions Boron free ~ Reduced sticky residues & deposits Hard water stable ~ Minimal soap/scum formation

GBP 1099.99
1

Pencool Ultra S102 Semi Synthetic Soluble Oil for Yellow Metals 205L

Pencool Ultra S102 Semi Synthetic Soluble Oil for Yellow Metals 205L

Pennine Pencool Ultra products represent a superior range of new generation soluble metalworking fluids free from formaldehyde release biocides offering the highest levels of health, safety and environmental compliance. Pencool Ultra S102 is a very high lubricity, versatile semi synthetic soluble metalworking fluid incorporating a unique combination of chlorine free extreme pressure additives offering excellent machining performance in moderate to arduous machining applications on tough ferrous and nonferrous alloys. The product is suitable for use in both soft and hard water make up qualities and offers excellent defoam properties. Applications Pencool Ultra S102 is recommended for a variety of metal removal techniques on tough ferrous and non-ferrous materials. The product excels in applications on copper based alloys and aluminium alloys due to the incorporation of highly effective passivator chemistry which prevents staining and the formation of insoluble soaps and lacquers helping to maintain machine cleanliness. Pencool Ultra S102 is also recommended for applications such as deep hole drilling on cast iron where the highly effective lubricity package promotes maximized tool life, and the high oil content offers effective protection against corrosion compared to conventional products. Features & Benefits Formaldehyde release biocide free ~ Improved EHS profile Biostable emulsion ~ Extended sump life/fewer fluid changes Low foaming ~ Reduced anti-foam additions Outstanding lubricity performance ~ Improved tool life/surface finish Chlorine free ~ Improved environmental profile Suitable for soft & hard make up water ~ Low foam and soap scum formations Highly effective passivator ~ Non staining on copper & aluminium alloys

GBP 1099.99
1

Pencool Ultra S325 High Performance Multi Metal Semi Synthetic Soluble Oil 205L

Pencool Ultra S325 High Performance Multi Metal Semi Synthetic Soluble Oil 205L

Pennine Pencool Ultra products represent a superior range of new generation soluble metalworking fluids free from formaldehyde release biocides offering the highest levels of health, safety and environmental compliance. Pencool Ultra S325 is a high performance, low oil content semi synthetic water mix metalworking fluid primarily suited to medium to heavy duty machining and grinding operations where the complex polymeric ester lubricity package along with improved wetting and detergency properties produce a fluid designed to promote outstanding surface finish, improved tool life and exceptional machine cleanliness. The product forms an extremely robust biostable micro emulsion in moderate to hard make up water qualities offering extended service life compared to many conventional coolants. Applications Pencool Ultra S325 offers high levels of lubricity suitable for a wide range of operations including milling, turning, deep hole drilling, threading, reaming, tapping and grinding on difficult materials such as steel alloys, titanium alloys, Inconel, stainless steel along with copper and aluminium alloys. Pencool Ultra S325 is also suitable for applications where a low foaming product is required including high pressure through spindle coolant systems employed on modern CNC machines. Features & Benefits Formaldehyde release biocide free ~ Improved EHS profile Biostable micro emulsion ~ Extended sump life/fewer fluid changes Low foaming ~ Reduced anti-foam additions Outstanding lubricity performance ~ Improved tool life/surface finish Chlorine free ~ Improved environmental profile Multipurpose applications ~ Allows for grade rationalisation Hard water stable ~ Low scum/soap formation

GBP 999.99
1