copper leaf water feature from GBP 8 | See the cheapest prices and offers on Cobiro CSS.com

Nittan IP55 Weatherproof Base

Nittan IP55 Weatherproof BaseThe waterproof base is for use in damp areas where water ingress will compromise loop communications and detector functionality. When used with its deckhead back box and cable glands this base is Ingress Protected to IP55.Key FeaturesIP 55 ratingRobust DesignEasy Entry Cable Glands

GBP 53.04

1

Nittan Deckhead Mounting Box for IP55 Base

Nittan Deckhead Mounting Box for IP55 BaseThe deckhead mount is for use with the Nittan IP55 base.The Deckhead Mounting device which protects bases sounder bases and sounder beacon bases from the ingress of water or other liquids. It is screwed to the soffit and accepts a variety of bases.

GBP 7.80

1

Nittan 24v Door Holder Floor Mounted 200N 3-84-0301

24v Door Holder Floor Mounted 200N 3-84-0301DescriptionThe 3-84-0301 is a 24V DC floor mounted magnetic door holder.Floor Mounted door holders are designed to hold open fire doors for ease of access and release them when an alarm is triggered. They are ideally suited to applications where maximum protection is needed against vandalism or accidental damage such as prisons and schools.They are also suited to applications where the door is not opening near a wall. They feature a rugged cast aluminium housing a holding magnet with integral ejection pin and a manual release switch. Cable entry can be through the base or through a 20mm hole provided in the housing for surface mounted conduit or pyro.

GBP 85.02

1

Nittan EV-PY Photoelectric Optical Detector

Nittan EV-PY Photoelectric Optical DetectorThe EV-PY is an Optical Smoke Detector designed as abackward compatible replacement for the EV-P and fully compatible withEvolution analogue addressable systems.The EV-PY comes to the market with some exciting newtechnological advances centred on an enhanced new PY smoke sensing chamber.The sensor includes a spherical feature within the smokechamber providing unrivalled performance for scattering light plus an OrangeLED which significantly improves response across the fire spectrum. TheChamber construction is designed to minimise the effect of dirtdustcontamination with a fine micromesh made of stainless steel to prevent ingressof even the smallest insects which can create false alarms.Key FeaturesOrange Optic LED and PY Type Chamber3 Sensitivity SettingsBackward compatible with EV-PDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 28.86

1

Nittan EV-PYH Photoelectric Optical amp Heat Multi-Sensor

Nittan EV-PYH Photoelectric Optical Heat Multi-SensorThe EV-PYH is an Optical SmokeHeat Detector that comes tothe market with some exciting new technological advances centred on an enhancednew PY smoke sensing chamber.The EV-PYH is designed as a backward compatible replacementfor the EV-PH and fully compatible with Evolution analogue addressable systems.The sensor includes a spherical feature within the smokechamber providing unrivalled performance for scattering light plus an OrangeLED which significantly improves response across the fire spectrum. TheChamber construction is designed to minimise the effect of dirtdustcontamination with a fine micromesh made of stainless steel to prevent ingressof even the smallest insects which can create false alarms.This advanced Multi Sensor is able to combine the benefitsof both optical and heat sensing technologies making it less prone to falsealarms than individual sensing devices. An innovative Nittan designed algorithmreads both signals simultaneously and generates alarm signals from either orboth sensors. The Heat sensor is Category A1R.Key FeaturesOrange Optic LED and PY Type Chamber3 Sensitivity SettingsHeat Category A1RBackward compatible with EV-PHDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 33.54

1

Nittan EV-PY-SCI Photoelectric Optical Detector with Short Circuit Isolator

Nittan EV-PY-SCI Photoelectric Optical Detector with ShortCircuit IsolatorThe EV-PY-SCI is an Optical Smoke Detector with integralShort Circuit Isolator fully compatible with Evolution analogue addressablesystems.The EV-PY-SCI comes to the market with some exciting new technologicaladvances centred on an enhanced new PY smoke sensing chamber.The sensor includes a spherical feature within the smokechamber providing unrivalled performance for scattering light plus an OrangeLED which significantly improves response across the fire spectrum. TheChamber construction is designed to minimise the effect of dirtdustcontamination with a fine micromesh made of stainless steel to prevent ingressof even the smallest insects which can create false alarms.The integral Short Circuit Isolator is bi-directional and inthe event of an external fault will shut down on one side to protect thesystem whilst allowing the device to continue communication with the firealarm control panel from the opposite side. The isolator will self-reset whenthe fault is cleared.The Nittan UB-6-SL-EV Base includes a sliding link toprovide loop continuity when detectors are removed. This is to ensure CallPoint operation is not affected by detector removal in accordance with BS5839-1 Clause 12.2.2.Key FeaturesOrange Optic LED and PY Type Chamber5 Sensitivity SettingsIntegral -ve Short Circuit IsolatorDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 31.20

1

Nittan EV-PYS Photoelectric Smoke Detector with Sounder

Nittan EV-PYS Photoelectric Smoke Detector with SounderBenefiting from the same sophisticated detection technology as the EV-P the EV-PYS Optical Detector comes with a sounder fully integrated within the sensor itself as opposed to a separate sounder base. The EV-PYS sensor drives and controls the EV-PSBCN base with the entire platform only taking one address for maximum system efficiency. This clever design makes for quick and simple installation saving both time and money whilst remaining extremely competitively priced. It also makes for a more aesthetically pleasing appearance with a lower profile for an unobtrusive appearance.This is an improved detector combining sounder product similar to and intended as fully backward compatible drop-in replacement for the outgoing EV-PS. The EV-PYS comes to the market with some exciting new technological advances centres on an enhanced new PY smoke sensing chamber.A spherical feature within the smoke chamber providing unrivalled performance for scattering light plus an Orange LED which significantly improves response across the fire spectrum. Chamber construction designed to minimise effect of dirtdust contamination with a fine micromesh made of stainless steel to prevent ingress of even the smallest insects which can create false alarms.Key FeaturesOptical Detector with built in SounderSounder 88dBA 3.5mADrive Output for dedicated EV-PSBCNEvolution FSK protocolEEPROM Addressed Programmer

GBP 51.48

1

Nittan EV-PYH-SCI Photoelectric Optical amp Heat Cat P Multi-Sensor With Short Circuit Isolator

Nittan EV-PYH-SCI Photoelectric Optical Heat Cat PMulti-Sensor With Short Circuit IsolatorEV-PYH-SCI is an Optical Smoke Heat Category PMulti-sensor Detector with integral Short Circuit Isolator fully compatiblewith Evolution analogue addressable systems.The EV-PYH-SCI comes to the market with some exciting newtechnological advances centred on an enhanced new PY smoke sensing chamber.The sensor includes a spherical feature within the smoke chamber providingunrivalled performance for scattering light plus an Orange LED whichsignificantly improves response across the fire spectrum. The Chamberconstruction is designed to minimise the effect of dirtdust contamination witha fine micromesh made of stainless steel to prevent ingress of even thesmallest insects which can create false alarms.This advanced Multi Sensor is able to combine the benefitsof both optical and heat sensing technologies making it less prone to falsealarms than individual sensing devices. An innovative Nittan designed algorithmreads both signals simultaneously and generates alarm signals from either orboth sensors. The Heat sensor is Category P meaning it can be configured aseither A1R A2S BS or CS heat category.The integral Short Circuit Isolator is bi-directional and inthe event of an external fault will shut down on one side to protect thesystem whilst allowing the device to continue communication with the firealarm control panel from the opposite side. The isolator will self-reset whenthe fault is cleared.The Nittan UB-6-SL-EV Base includes a sliding link toprovide loop continuity when detectors are removed. This is to ensure CallPoint operation is not affected by detector removal in accordance with BS5839-1 Clause 12.2.2.Key FeaturesOrange Optic LED and PY Type Chamber5 Sensitivity SettingsHeat Category P A1RA2SBSCSIntegral -ve Short Circuit IsolatorDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 35.88

1

Brand

Merchant

Price (EUR)