atlantic dulse benefits from GBP 90 | See the cheapest prices and offers on Cobiro CSS.com

81PC IMP Gauge Block Set Non CAL Grade 2

Steel gauge block sets, Grade 2: for workshop use. Features and Benefits Supplied in high quality wooden bench cases to keep set together and organised Notes Available in two grades Standards Manufactured to BS EN ISO 3650

GBP 169.99

1

47PC MET Gauge Block Set Non Calibrated

Steel gauge block sets, Grade 2: for workshop use. Features and Benefits Supplied in high quality wooden bench cases to keep set together and organised Notes Available in two grades Standards Manufactured to BS EN ISO 3650

GBP 169.99

1

5x 150mm Hook-N-Loop Backing Pad 5/8" UNC Female

Designed to vastly increase the speed of abrasive disc changes. Features and Benefits Made from durable material Six hole configuration Increases tool efficiency & allows for rapid disc changing Notes Suitable for use with Kennedy Hook-n-Loop backed sanding discs

GBP 134.95

1

20x MB-10 Tack Cloths, Box of 10

High-quality cleaning cloths, perfect for a wide range of general use applications. Sold in packs of 10. Features and Benefits Non-drying resin is used The edges are sealed to trap loose fibres Notes Tack cloths size: (18" / 45cm)

GBP 125.80

1

5x S/Stick Backing Pad 5/16" UNF Male for 125MM Disc

High quality Stick-it backing pads, for use with rotary and orbital sanders adhesive backed discs. Features and Benefits The incredibly versatile pads can be used for discs with or without holes Industry quality - suitable for industrial use Notes Thread size: 5/16" x UNF male

GBP 154.95

1

12.5kg High Pressure Grease Pump comes with Lid

Direct high pressure lubricating system with centre pump. Features and Benefits Delivery tube with offset nozzle is flexible for easy use Includes metal dust cover/lid with integral stabiliser and fixing mechanism Typical Applications Suitable for medium greases Notes Lever Type LP12.5 Inlet on pump max: 260mm

GBP 119.99

1

25MM Diameter Insulated Plastic-Hammer - 1000 V

The insulated plastic hammer from Kennedy features replaceable insets and protects against up to 1000 volts of electricity. Features and Benefits Multiple layers of insulation protects users against up to 1000 volts of electricity Insets are replaceable for a long service life Safe, recoil-free design Standards IEC 60900

GBP 119.99

1

20-115mm Industrial Chain Pipe Cutter

This industrial chain pipe cutter can cut wall pipe (welded and seamless) up to 5mm thick. The grip action eliminates hand gripping effort to ensure perfect tracking. Features and Benefits Can cut pipes up to 5mm thick Grip action minimises user effort Chain ensures perfect tracking for seamless results Typical Applications Construction Plumbing Automotive

GBP 139.99

1

160MM Insulated Cable Cutters 2-CUT - 1000 V

This double-edge cable cutter from Kennedy delivers a comfortable grip and a squeeze-free cutting action for convenient working. Features and Benefits Double cutting edge provides squeeze-free cutting action Insulated handles protect against up to 1000 volts of electricity Comfortable handle grip for strain-free use Typical Applications Copper and aluminium cables Standards IEC 60900

GBP 89.99

1

3- Tonne Quick Lift Hydraulic Trolley Jack

3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Features and Benefits Constructed from heavy gauge steel 1m, two-piece handle 120mm diameter saddle Automatic safety overload protection Positive twist, lock and release mechanism Heavy duty rear swivelling castor wheels. Notes Maximum load: 3000kg. Minimum height: 145mm. Maximum height: 490mm.

GBP 129.99

1

H&G Drill Sleeve 5MT Inside x 6MT Outside

Morse Taper Drill Sleeves are a range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally conforming to ISO 238 BS 1660 : 2. Features and Benefits Manufactured from high quality steel and case hardened all over Fully hardened and ground internally and externally Standards ISO 238 BS 1660: 2

GBP 109.99

1

Impact Socket 1" Square Drive, 85mm

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked with laser etching, making the correct size easy to identify for a quicker selection. Features and Benefits Made from chrome molybdenum alloy steel for increased strength Black oxide coating for prolonged tool lifespan Laser etched sizing for easy tool identification Standards Conforms to DIN 3129

GBP 89.99

1

Impact Socket 1" Square Drive, 100mm

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked with laser etching, making the correct size easy to identify for a quicker selection. Features and Benefits Made from chrome molybdenum alloy steel for increased strength Black oxide coating for prolonged tool lifespan Laser etched sizing for easy tool identification Standards Conforms to DIN 3129

GBP 169.99

1

Tool Basket with Shoudler Strap & Cover 41cm X 23cm X 28cm

The tool basket from Kennedy features an adjustable shoulder strap and a cover for secure storage and transport of tools. Features and Benefits Includes a robust metal handle for strength when carrying heavier tools and equipment Swing-down front and rear walls provide excellent access and visibility of tools Front and rear walls maintain a ninety-degree opening Typical Applications Storage and transport of tools and components

GBP 119.99

1

95mm Impact Socket 1" Square Drive

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked with laser etching, making the correct size easy to identify for a quicker selection. Features and Benefits Made from chrome molybdenum alloy steel for increased strength Black oxide coating for prolonged tool lifespan Laser etched sizing for easy tool identification Standards Conforms to DIN 3129

GBP 113.99

1

Impact Socket 1" Square Drive, 90mm

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked with laser etching, making the correct size easy to identify for a quicker selection. Features and Benefits Made from chrome molybdenum alloy steel for increased strength Black oxide coating for prolonged tool lifespan Laser etched sizing for easy tool identification Standards Conforms to DIN 3129

GBP 109.99

1

H&G Drill Sleeve 4MT Inside x 6MT Outside

Morse Taper Drill Sleeves are a range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally conforming to ISO 238 BS 1660 : 2. Features and Benefits Manufactured from high quality steel and case hardened all over Fully hardened and ground internally and externally Standards ISO 238 BS 1660: 2

GBP 109.99

1

80mm Deep Impact Socket 1" Square Drive

1" drive deep impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Ideal for applications including turning nuts onto bolts. Features and Benefits Chrome molybdenum alloy steel for greater durability Black oxidised finish for prolonged tool lifespan Permanent laser etched markings for easy tool identification Standards Conforms to DIN 3129

GBP 129.99

1

Panel Beating Set 7 Piece

Drop forged, high carbon steel hammers with ground heads and cheeks. Hickory, octagonal section shafts. Features and Benefits Ground heads and cheeks Hickory, octagonal shafts Drop forged, high carbon steel Blow moulded impact resistant case Contents 1x: curved, utility, heel and toe dolly. 1x: 12oz shrinking hammer and flat faced bumping hammer, 1x 10oz round finishing pick. Supplied in a high quality fitted blow moulded impact resistant case.

GBP 89.99

1

75mm Deep Impact Socket 1" Square Drive

1" drive deep impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Ideal for applications including turning nuts onto bolts. Features and Benefits Chrome molybdenum alloy steel for greater durability Black oxidised finish for prolonged tool lifespan Permanent laser etched markings for easy tool identification Standards Conforms to DIN 3129

GBP 113.99

1

140MM Insulated Reversible Ratchet 1/4"SQ/DR - 1000 V

These insulated reversible ratchets from Kennedy are made from high-quality, chrome-plated steel and have been twice dipped in insulation to protect users against up to 1000 volts of electricity. Features and Benefits Forward and reverse gears for convenient working Individually tested against high voltage Style and size printed on the body for easy identification Dual-layer insulation protects against electricity up to 1000 volts Standards IEC 60900

GBP 89.99

1

70mm Deep Impact Socket 1" Square Drive

1" drive deep impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Ideal for applications including turning nuts onto bolts. Features and Benefits Chrome molybdenum alloy steel for greater durability Black oxidised finish for prolonged tool lifespan Permanent laser etched markings for easy tool identification Standards Conforms to DIN 3129

GBP 89.99

1

20.0MM 2FL Standard Carbide Slot Drill

2 flute regular series milling cutters for optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Features and Benefits Carbide micrograin construction for increased toughness 2 flutes for optimal cutting performance and maximum swarf removal when plunging Standards Manufactured to Works Standards Notes Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050 Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

GBP 129.99

1

40mm DIA Cable Cutter Lever Type

These cable cutters have heat-treated cutting edges and are designed to cut copper and aluminium cables with minimal distortion. The soft grip handles are designed for user comfort whilst exerting force. The product is available in three sizes. Features and Benefits Soft grip handles are designed to bolster user comfort and control Heat treated cutting edges ensure accurate and precise cutting even with extended use Available in three sizes to suit your needs Typical Applications Electrical Construction DIY

GBP 109.99

1

Brand

Colour

Size

Merchant

Price (EUR)

81PC IMP Gauge Block Set Non CAL Grade 2

47PC MET Gauge Block Set Non Calibrated

5x 150mm Hook-N-Loop Backing Pad 5/8" UNC Female

20x MB-10 Tack Cloths, Box of 10

5x S/Stick Backing Pad 5/16" UNF Male for 125MM Disc

12.5kg High Pressure Grease Pump comes with Lid

25MM Diameter Insulated Plastic-Hammer - 1000 V

20-115mm Industrial Chain Pipe Cutter

160MM Insulated Cable Cutters 2-CUT - 1000 V

3- Tonne Quick Lift Hydraulic Trolley Jack

H&G Drill Sleeve 5MT Inside x 6MT Outside

Impact Socket 1" Square Drive, 85mm

Impact Socket 1" Square Drive, 100mm

Tool Basket with Shoudler Strap & Cover 41cm X 23cm X 28cm

95mm Impact Socket 1" Square Drive

Impact Socket 1" Square Drive, 90mm

H&G Drill Sleeve 4MT Inside x 6MT Outside

80mm Deep Impact Socket 1" Square Drive

Panel Beating Set 7 Piece

75mm Deep Impact Socket 1" Square Drive

140MM Insulated Reversible Ratchet 1/4"SQ/DR - 1000 V

70mm Deep Impact Socket 1" Square Drive

20.0MM 2FL Standard Carbide Slot Drill

40mm DIA Cable Cutter Lever Type