37 results (0,14787 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

GFN-5 Insert Grade IC328

GFN-5 Insert Grade IC328

A thin PVD coated layer on a tough substrate,for milling, parting and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions. Features and Benefits Tough substrate for greater strength and hardness Thin PVD TiCN coated layer for greater heat and wear resistance Designed to operate at low to medium cutting speeds and in unstable machining conditions Typical Applications Parting Milling Grooving Steel Stainless steel

GBP 129.99
1

CNMG 190612-NR Insert Grade IC907

CNMG 190612-NR Insert Grade IC907

CNMG Turning Inserts grade IC907 designed for machining of heat resistant alloys, austenitic stainless steel and hard steel. Features and Benefits Double-sided negative (0) relief angle inserts offering a strong edge for general applications and varying depths of cut dependent on chipbreaker type A tough sub-micron substrate, suitable for low-to-medium cutting speeds Rake angle which is positive and varies along the edge to negative in order to prevent chipping Specially designed reduces cratering

GBP 159.99
1

10x SCGT 09T304FN-ALU Insert Grade AT20

10x SCGT 09T304FN-ALU Insert Grade AT20

SCGT-AS square inserts feature a 7 degree postive flank and a highly positive rake angle with a sharp cutting edge making it ideal for machining aluminium. Features and Benefits Ideal for finishing and semi-finishing applications Highly positive rake and sharp cutting edge for effective cutting Uncoated for use on aluminium Specifications ISO Range P/M/K - (M10-M25)(K10-K20) ISO Range - N/S/H - (H05-H15)(S05-S20)(N05-N25) Uncoated Typical Applications Turning Aluminium

GBP 139.90
1

CCMT 120408-SM Insert Grade IC9250

CCMT 120408-SM Insert Grade IC9250

CCMT turning inserts single-sided, 7 positive relief angle inserts for semi-finish and finish cutting. "M" tolerance edge condition for general applications. Chip breaking in moderate feed range. Positive rake, low cutting forces. Used for a wide range of materials, including non-ferrous and exotic alloys. Features and Benefits Tough substrate with a cobalt enriched layer for greater cutting strength Thick CVD TiCN+alpha Al2O3+TiN coating for high toughness and wear resistance Chipbreaker SM for finishing applications Typical Applications General use machining Steel Standards Insert Grade IC9250 ISO Range - (P10-P35)(M05-M20)

GBP 89.99
1

CNMG 120412-NR Insert Grade IC5010

CNMG 120412-NR Insert Grade IC5010

CNMG 120412-NR Turning Inserts are recommended mainly for grey cast iron at stable or slightly unstable condition and can be used successfully also on nodular cast iron. Made with a hard substrate and MTCVD TiCN and featuring a thick alpha Al2O3 CVD coating for increased durability. Features and Benefits Hard substrate construction with TiCN+Al2O3+TiN coating for durability For applications including grey and nodular cast iron Specifications ISO range: P/M/K ISO range: N/S/H Coating type: CVD Coating: TiCN+Al2O3+TiN Typical Applications Cast iron Turning

GBP 89.99
1

IDI 180-SG Chamdrill Insert Grade IC908

IDI 180-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 169.99
1

IDI 135-SG Chamdrill Insert Grade IC908

IDI 135-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 149.99
1

P290 ACCT 1806PDR-HL Insert Grade IC830

P290 ACCT 1806PDR-HL Insert Grade IC830

P290 ACCT are single-sided rectangular milling inserts with two 12 and 18 mm straight cutting edges with a 'SUMO TEC' AlTiN+TiN PVD coating. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. Features and Benefits 2 x cutting edges Durable 'SUMO TEC' AlTiN+TiN PVD coating for prolonged tool life High toughness and wear resistance Specifications Insert Grade IC830 ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Typical Applications Milling Steel Stainless steel Alloy steel High temperature applictions

GBP 139.99
1

IDI 150-SG Chamdrill Insert Grade IC908

IDI 150-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 159.99
1

IDI 160-SG Chamdrill Insert Grade IC908

IDI 160-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 159.99
1

GFN-3W Insert Grade IC354

GFN-3W Insert Grade IC354

GFN SELF-GRIP parting and grooving inserts are self locking making them ideal for parting and grooving applications. Featuring a positive rake, single cavity and negative land and shoulders they provide extra cutting strength in medium to high feeds. Their PVD coating helps reduce their susceptibility to wear and heat. Features and Benefits Self locking for greater stability Positive rake and single cavity for greater chip flow Negative land and shoulders for greater strength PVD coating helps reduce wear and heat Standards IC354 (P20 - P40, M10 - M30) PVD coated Medium speed - high feed Typical Applications Parting Grooving Carbon steel Alloy steel Stainless steels

GBP 109.99
1

IDI 095-SG Chamdrill Insert Grade IC908

IDI 095-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 139.99
1

CCMT 120408-SM Insert Grade IC8250

CCMT 120408-SM Insert Grade IC8250

These single-sided, 7 positive relief angle inserts are ideal for semi-finish and finish cutting. They have an "M" tolerance edge condition, making them suitable for general applications. They feature chip breaking in moderate feed range, positive rake and low cutting forces. The versatile inserts are used for a wide range of materials, including non-ferrous and exotic alloys. Features and Benefits Inserts are tough substrates with a cobalt enriched layer Versatile and suitable for general applications Chip breaking in moderate feed range Excellent toughness and wear resistance Typical Applications Machining of steel in a wide range of conditions

GBP 99.99
1

GFN-6 Insert Grade IC354

GFN-6 Insert Grade IC354

GFN SELF-GRIP parting and grooving inserts are self locking making them ideal for parting and grooving applications. Featuring a positive rake, single cavity and negative land and shoulders they provide extra cutting strength in medium to high feeds. Their PVD coating helps reduce their susceptibility to wear and heat. Features and Benefits Self locking for greater stability Positive rake and single cavity for greater chip flow Negative land and shoulders for greater strength PVD coating helps reduce wear and heat Standards IC354 (P20 - P40, M10 - M30) PVD coated Medium speed - high feed Typical Applications Parting Grooving Carbon steel Alloy steel Stainless steels

GBP 133.99
1

IDI 190-SG Chamdrill Insert Grade IC908

IDI 190-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 169.99
1

IDI 205-SG Chamdrill Insert Grade IC908

IDI 205-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 169.99
1

IDI 165-SG Chamdrill Insert Grade IC908

IDI 165-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 92.99
1

IDI 170-SG Chamdrill Insert Grade IC908

IDI 170-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 109.99
1

IDI 143-SG Chamdrill Insert Grade IC908

IDI 143-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 149.99
1

IDI 125-SG Chamdrill Insert Grade IC908

IDI 125-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 149.99
1

IDI 101-SG Chamdrill Insert Grade IC908

IDI 101-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 139.99
1