35 results (0,16975 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

CC12 138 x 40 x 40mm Serrated Adjustable Clamp

CC12 138 x 40 x 40mm Serrated Adjustable Clamp

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts. Features and Benefits Low profile clamp that keeps top surfaces clear for machining Ideal for rough or finished parts Black oxide finish for increased durability Specifications Material: Medium carbon steel Hardness: Jaw only: HRC 38 Surface finish: Black Oxide Jaws: Surface treated with high frequency quenching Typical Applications Machining Metal

GBP 92.99
1

SD750 Standard Duty Clamp

SD750 Standard Duty Clamp

For various engineering and maintenance applications across all industrial sectors. A bright yellow epoxy coating gives the sliding jaw and J bar added protection, preventing significant deterioration and prolonging the life of the working parts. Features and Benefits Spring loaded jaw that stays in position when pressure removed Jaw moves to securely clamp angled surfaces No long screws to bend Tightening the clamps does not impose rotation on the workpiece Typical Applications Metal fabrication Welding Machining Site maintenance Moulding box and die holding Toolroom Plastic and fibreglass moulding Plate fabrication

GBP 113.99
1

SD150 Standard Duty Clamp

SD150 Standard Duty Clamp

For various engineering and maintenance applications across all industrial sectors. A bright yellow epoxy coating gives the sliding jaw and J bar added protection, preventing significant deterioration and prolonging the life of the working parts. Features and Benefits Spring loaded jaw that stays in position when pressure removed Jaw moves to securely clamp angled surfaces No long screws to bend Tightening the clamps does not impose rotation on the workpiece Typical Applications Metal fabrication Welding Machining Site maintenance Moulding box and die holding Toolroom Plastic and fibreglass moulding Plate fabrication

GBP 89.99
1

SD300 Standard Duty Clamp

SD300 Standard Duty Clamp

For various engineering and maintenance applications across all industrial sectors. A bright yellow epoxy coating gives the sliding jaw and J bar added protection, preventing significant deterioration and prolonging the life of the working parts. Features and Benefits Spring loaded jaw that stays in position when pressure removed Jaw moves to securely clamp angled surfaces No long screws to bend Tightening the clamps does not impose rotation on the workpiece Typical Applications Metal fabrication Welding Machining Site maintenance Moulding box and die holding Toolroom Plastic and fibreglass moulding Plate fabrication

GBP 99.99
1

150mm Standard Drill Press Vice

150mm Standard Drill Press Vice

Available in four different jaw widths, these drill press vices are ideal for use when drilling, light milling, and performing work both vertically and horizontally. Features one grooved and one plain replaceable jaw for square and hexagonal shapes across flats or corners, thin strips and discs. Jaws and lead screw are hardened and ground. Features and Benefits Can be used to support work-pieces either vertically or horizontally Available in four varying sizes to allow you to select the size that best suits your needs Hardened and ground jaws make for a robust product Typical Applications For drilling, light milling and general purpose working on materials

GBP 139.99
1

2x 20MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

2x 20MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

Manufactured from type 1.4404/316L stainless steel, these round bars are designed for making into key components and tools for your desired industry. Features and Benefits Contains an addition of molybdenum that gives it improved corrosion resistance Suited to use in heavy gauge (over about 6mm) welded components Excellent toughness, even at cryogenic temperatures Available in a range of sizes to suit your needs Avoids material wastage Typical Applications Typically used in food processing equipment, brewery equipment, chemical and petrochemical equipment, laboratory benches & equipment, coastal architectural panelling, coastal balustrading, boat fittings, chemical transportation containers, heat exchangers, mining screens, nuts and bolts, springs & medical implants

GBP 107.98
1

5x 1.1/2"x1.1/2"x1/8"x1 Mtralum Channel 6063 (1 Pce)

5x 1.1/2"x1.1/2"x1/8"x1 Mtralum Channel 6063 (1 Pce)

Manufactured from Grade 6063 medium strength alloy, each aluminium channel has additions of magnesium and silicon for overall longevity and ease of manipulating the product. Available in a range of imperial sizes, each channel is 1 metre long and has good formability in manufacture, is heat treatable and offers good mechanical properties. Features and Benefits Available in a variety of sizes to suit your requirements Readily suited for welding Possesses a higher corrosion resistance for product longevity Reduces material wastage as it saves you milling or cutting down from a larger block of aluminium Typical Applications Typically used in architectural and industrial applications such as complex extrusions for window frames, doors frames, roofs, signs, shop fittings, stair balustrades rails and posts

GBP 94.95
1

4x 1" x 1/4" x 24" Copper Flat Bar CW004A/C101 (1 Piece)

4x 1" x 1/4" x 24" Copper Flat Bar CW004A/C101 (1 Piece)

These copper bars are manufactured from CW004A/C101, the most widely used copper thanks to its thermal and electrical conductivity as well as its longevity. Available in two imperial sizes, the bars are 1 metre in length and are ready to weld. Features and Benefits The most widely used of all the coppers because of its combination of electrical and thermal conductivity, corrosion resistance, workability and aesthetic beauty. The normal grade for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications Available in two thicknesses, both 1 metre in length Avoids material wastage as you can select the thickness that best suits your needs Typical Applications Used in motors, contacts, terminals and many other current carrying applications Other uses include architectural metalwork, gutters, flashing, roofing, automotive and industrial radiators, chemical process equipment, vats, kettles and pans

GBP 123.96
1

ER16 9-Piece Collet Set

ER16 9-Piece Collet Set

ER - Collet Sets Indexa ER collets are the most versatile tool holding system for any operation that utilises a round shank cutting tool in a machining centre and is suitable for a wide range of applications. Features & Benefits Manufactured from hardened and tempered high alloy steel All supplied in hard wearing bench cases Conform to DIN 6499 standards Well maintained ER system components result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish Variety of sets available to suit application Typical Applications Drilling Milling Tapping Reaming Boring Notes Sets available: ER11: Number of collets: 10 - Range 1.0 - 7.0mm ER16: Number of collets: 9 - Range 1.0 - 10.0mm ER20: Number of collets: 11 - Range 2.0 - 13.0mm ER25: Number of collets: 15 - Range 1.0 - 16.0mm ER32: Number of collets: 18 - Range 2.0 - 20.0mm ER40: Number of collets: 23 - Range 3.0 - 26.0mm

GBP 149.99
1

ER20 2-13mm Collet Set

ER20 2-13mm Collet Set

ER - Collet Sets Indexa ER collets are the most versatile tool holding system for any operation that utilises a round shank cutting tool in a machining centre and is suitable for a wide range of applications. Features & Benefits Manufactured from hardened and tempered high alloy steel All supplied in hard wearing bench cases Conform to DIN 6499 standards Well maintained ER system components result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish Variety of sets available to suit application Typical Applications Drilling Milling Tapping Reaming Boring Notes Sets available: ER11: Number of collets: 10 - Range 1.0 - 7.0mm ER16: Number of collets: 9 - Range 1.0 - 10.0mm ER20: Number of collets: 11 - Range 2.0 - 13.0mm ER25: Number of collets: 15 - Range 1.0 - 16.0mm ER32: Number of collets: 18 - Range 2.0 - 20.0mm ER40: Number of collets: 23 - Range 3.0 - 26.0mm

GBP 139.99
1

5x 18MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x 18MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 104.95
1

4x 25mm x 6mm x 1m Copper Flat Bar CW004A/C101 (1 Piece)

4x 25mm x 6mm x 1m Copper Flat Bar CW004A/C101 (1 Piece)

Manufactured from CW004A/C101 grade copper, these flat bars are ideal for constructing a variety of components, tools and appliances. Each bar is constructed from the normal grade of copper for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications. Both bars are a metre and vary only in their thickness to suit your needs. Features and Benefits The most widely used of all the coppers because of its combination of electrical and thermal conductivity, corrosion resistance, workability and aesthetic beauty The normal grade for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications Corrosion resistant for overall product longevity Electrical and thermal conductivity Available in two thicknesses to suit your needs Avoids material wastage Typical Applications Used in motors, contacts, terminals and many other current carrying applications Other uses include architectural metalwork, gutters, flashing, roofing, automotive and industrial radiators, chemical process equipment, vats, kettles and pans

GBP 119.96
1

5x 22MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x 22MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 134.95
1

5x 20MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x 20MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 124.95
1

5x 1"x1"x1/8"x24" Brass EQ/ANGCW614N/CZ121 (1 Pce)

5x 1"x1"x1/8"x24" Brass EQ/ANGCW614N/CZ121 (1 Pce)

Manufactured from a brass alloy CZ121 / CW614N, this equal angle is used for machining. It has lead added to the composition to improve machinability. The lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Each equal angle of brass is 24in. in length and varies in width to suit your requirements. Suited for making intricate parts. Features and Benefits The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts Available in a range of sizes and specifications to suit your needs, all 24in. in length Can be used for a wide variety of industrial applications and to form intricate components Supplied as an equal angle shaped section of brass Product is not suited for use when cold The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance Typical Applications Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 124.95
1

25mm x 125mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

25mm x 125mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 89.99
1

10mm x 250mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

10mm x 250mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 109.99
1

40mm x 100mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

40mm x 100mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 119.99
1

12mm x 250mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

12mm x 250mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 109.99
1

20mm x 150mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

20mm x 150mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 119.99
1

50mm x 60mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

50mm x 60mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 109.99
1

10mm x 300mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

10mm x 300mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 119.99
1

15mm x 200mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

15mm x 200mm x 500mm Ground Flat Stock Gauge Plate - 01 Tool Steel

A range of precision ground flat tool steel of the grade 1.2510/ O1 and with a length of 500mm and thickness of 1mm. The product is supplied annealed with all four sides ground and the bar ends saw cut. Ground flat stock is made ready to use on width and thickness, or made close to the finish size in order to save you time, as you don't need to mill or grind material from a raw material plate. This cold work tool steel is typically used to build tools that generally face working temperatures up to 200 C and can be hardened up to 64 HRc. With an excellent general purpose grade, it's the ideal product for manufacturing a great deal of tools. Features and Benefits Supplied in an annealed condition making it easier for you to manipulate the material in a way that suits you Offers good durability, gives excellent wear resistance and holds an excellent cutting edge Available in a wide range of metric sizes to help avoid material losses as you can purchase the size required for your individual application With a steel grade of 1.2510/O1 this product is easy to harden Offers a high wear-resistance and high dimensional stability making it a robust product Typical Applications Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications Notes Material Specification: Nearest AISI Standard: O1 Hardness: 230 HB Surface Roughness: max. 3.2m

GBP 113.99
1