41 results (0,23740 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

5511 14.90MM Carbide SL Ratio Drill

5511 14.90MM Carbide SL Ratio Drill

The series 511 Carbide Straight Shank Ratio Drill is ideal for the drilling of long and short-chipping materials. This includes structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to app. 1200N/mm. Features and Benefits High alignment accuracy with small diameter tolerance and excellent surface finish Point angle: 140 Diameter tolerance m7 Shank tolerance h6 3xD Manufactured to DIN 6537

GBP 219.99
1

305 15.25mm HSS-Co S/S Jobber Drill

305 15.25mm HSS-Co S/S Jobber Drill

Series 305 HSS-Co straight shank jobber drills are general purpose drills for use on cast steel, alloyed / unalloyed steel,cast materials,heat treatable and case hardened steels. Manufactured from high speed steel with a steam tempered finish and cobalt they feature good cutting hardness and are available in a range of metric sizes Features and Benefits Metric sizes 0.20mm to 20.00mm High speed steel and cobalt for good cutting hardness and durability A steam tempered surface provides an improved corrosion protection Standards Manufactured to DIN 338

GBP 199.99
1

305 20.00mm HSS-Co S/S Jobber Drill

305 20.00mm HSS-Co S/S Jobber Drill

Series 305 HSS-Co straight shank jobber drills are general purpose drills for use on cast steel, alloyed / unalloyed steel,cast materials,heat treatable and case hardened steels. Manufactured from high speed steel with a steam tempered finish and cobalt they feature good cutting hardness and are available in a range of metric sizes Features and Benefits Metric sizes 0.20mm to 20.00mm High speed steel and cobalt for good cutting hardness and durability A steam tempered surface provides an improved corrosion protection Standards Manufactured to DIN 338

GBP 249.99
1

5504 20.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 20.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 Series are Carbide roughing end mill for slotting, roughing and ramping with fine teeth for a refined finish. The FIREX coated finish helps aid durability whilst the weldon flattened shank helps prevent the tool from rotating during operation. Features and Benefits Carbide construction enables faster speeds and durability at high temperatures FIREX coating for increased durability Fine teeth for a more refined finish Weldon flatted shank helps prevent tool rotation during operation Specifications 30 helix 4 flutes Manufactured to DIN 6527L Metric sizes 6.00mm to 20.00mm Typical Applications Shoulder milling Slotting Roughing Ramping

GBP 259.99
1

605 19.00mm HSS-Co (TYPE-Ti) Jobberdrill

605 19.00mm HSS-Co (TYPE-Ti) Jobberdrill

Series 605 HSS-Co Straight Shank Jobber Drills are constructed using a rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Features and Benefits High speed steel construction High-heat resistance with large helix angle of 35 Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels Standards Manufactured to DIN338 Typical Applications Drilling Metals Titanium Titanium alloys Stainless steels Heat resistant steels Notes Limited suitability for special alloys such as hastaloy, inconel, nimonic etc

GBP 229.99
1

5504 18.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 18.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 Series are Carbide roughing end mill for slotting, roughing and ramping with fine teeth for a refined finish. The FIREX coated finish helps aid durability whilst the weldon flattened shank helps prevent the tool from rotating during operation. Features and Benefits Carbide construction enables faster speeds and durability at high temperatures FIREX coating for increased durability Fine teeth for a more refined finish Weldon flatted shank helps prevent tool rotation during operation Specifications 30 helix 4 flutes Manufactured to DIN 6527L Metric sizes 6.00mm to 20.00mm Typical Applications Shoulder milling Slotting Roughing Ramping

GBP 229.99
1

605 18.00mm HSS-Co (TYPE-Ti) Jobberdrill

605 18.00mm HSS-Co (TYPE-Ti) Jobberdrill

Series 605 HSS-Co Straight Shank Jobber Drills are constructed using a rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Features and Benefits High speed steel construction High-heat resistance with large helix angle of 35 Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels Standards Manufactured to DIN338 Typical Applications Drilling Metals Titanium Titanium alloys Stainless steels Heat resistant steels Notes Limited suitability for special alloys such as hastaloy, inconel, nimonic etc

GBP 214.99
1

605 17.00mm HSS-Co (TYPE-Ti) Jobberdrill

605 17.00mm HSS-Co (TYPE-Ti) Jobberdrill

Series 605 HSS-Co Straight Shank Jobber Drills are constructed using a rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Features and Benefits High speed steel construction High-heat resistance with large helix angle of 35 Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels Standards Manufactured to DIN338 Typical Applications Drilling Metals Titanium Titanium alloys Stainless steels Heat resistant steels Notes Limited suitability for special alloys such as hastaloy, inconel, nimonic etc

GBP 229.99
1

10x 205 39/64" HSS S/S Jobber Drill

10x 205 39/64" HSS S/S Jobber Drill

The Series 205 range of jobber drills from Guhring are suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Featuring a hardy HSS construction and a steam oxide coating for greater wear, heat resistance and chip flow. Features and Benefits High-speed steel construction for increased rigidity Steam (black) oxide coating for increased resistance to heat and wear Improved chip flow ideal for use with ferrous materials Standards Manufactured to BS 328, DIN338RN Typical Applications Drilling Cast iron Steel German silver Graphite

GBP 429.90
1

5504 16.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 16.00MM Carbide Roughing End Mill GS100 U - Fire Coating

5504 Series are Carbide roughing end mill for slotting, roughing and ramping with fine teeth for a refined finish. The FIREX coated finish helps aid durability whilst the weldon flattened shank helps prevent the tool from rotating during operation. Features and Benefits Carbide construction enables faster speeds and durability at high temperatures FIREX coating for increased durability Fine teeth for a more refined finish Weldon flatted shank helps prevent tool rotation during operation Specifications 30 helix 4 flutes Manufactured to DIN 6527L Metric sizes 6.00mm to 20.00mm Typical Applications Shoulder milling Slotting Roughing Ramping

GBP 179.99
1

605 17.50mm HSS-Co (TYPE-Ti) Jobberdrill

605 17.50mm HSS-Co (TYPE-Ti) Jobberdrill

Series 605 HSS-Co Straight Shank Jobber Drills are constructed using a rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Features and Benefits High speed steel construction High-heat resistance with large helix angle of 35 Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels Standards Manufactured to DIN338 Typical Applications Drilling Metals Titanium Titanium alloys Stainless steels Heat resistant steels Notes Limited suitability for special alloys such as hastaloy, inconel, nimonic etc

GBP 239.99
1

5511 16.50mm Carbide Straight Shank Ratio Drill - FIREX Coated

5511 16.50mm Carbide Straight Shank Ratio Drill - FIREX Coated

For drilling into general steel, cast steel, cast iron,chilled cast iron, malleable cast iron, non-ferrous heavy and light metal, and abrasive plastic. FIREX Guhrings own coating uses the PVD process. An all round coating can achieve two to three times the performance of TiN, and considerably better than TiALn. Has excellent heat resistance as well as high toughness, therefore it is well-suited for interrupted cutting. Features and Benefits Self-centering for greater precision Solid carbide construction for greater toughness FIREX coating achieves two to three times the performance of TiN Standards Manufactured to DIN 6537 Notes Sizes 3.00mm to 20.00mm

GBP 349.99
1

5514 17.50MM Carbide Straight Shank Ratio Drill - Firex Coated

5514 17.50MM Carbide Straight Shank Ratio Drill - Firex Coated

For the drilling of long and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to app. 1200N/mm2, including carbon steels, bronze, cast iron and high alloyed AISi-alloys. Features and Benefits High alignment accuracy with small diameter tolerance and excellent surface finish FIREX coating for increased heat and wear resistance Self-centring qualities for greater precision Short chip production due to a concave cutting point geometry and web thinning Standards Manufactured to DIN 6537 Notes Sizes 3.00mm to 20.00mm

GBP 183.99
1