FFE Fireray 5000-001 Fireray 5000 Controller EN

FFE Fireray 5000-001 Fireray 5000 Controller ENA spare Fireray 5000 controller.The Fireray 5000 Spare System Controller supports up to two Fireray 5000 beam detector heads.The Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesSpare System Controller low levelLogs the 50 most recent eventsProgrammable sensitivity and fire thresholds20mm cable gland knock-outs on system controller2-wire interface from system controller to detectorWorking optical path for detector alignmentIdeally suited protecting large areas where use of traditional detectors would be difficultcostly to install5 year warranty