73 results (0,20631 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

4x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

4x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

An optional system expansion device for use with CFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels. Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote). PCB mounts inside the CFP fire panel. Reset relay is active during the panels reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Outputs are NOT designed to switch mains voltages.

GBP 239.96
1

C-TEC ZFP 8 Way Relay PCB (full size)

C-TEC ZFP 8 Way Relay PCB (full size)

8-Way Relay PCB designed to enhance the functionality of a ZFP addressable fire panel to include 8 additional relay outputs. 8 x 1A 30V single pole contacts. Full size PCB can be scored in the middle to produce a half size 4 way relay PCB. Programmable via the ZFPs PC Tools. Polling, power and separate Relay Actibvated LED indicators. Up to 15 A-BUS Expansion PCBs can be connected to a ZFP Panel via its RS485 A-BUS network. Typically installed within the ZFP panel but can work up to 1 KM away for non-EN 54-2 functions.

GBP 339.99
1

3x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote & 8 Output Per Zone Relays)

3x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote & 8 Output Per Zone Relays)

An optional system expansion device for use with CFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels. Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote) and eight output per zone relays. PCB mounts inside the CFP fire panel. Reset relay is active during the panels reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Output per zone relays will changeover when the corresponding zone is in alarm (subject to certain conditions for full details refer to the instructions, downloadable below). Outputs are NOT designed to switch mains voltages.

GBP 239.97
1

7x C-TEC 24V 5A Isolatable Relay On A Plate

7x C-TEC 24V 5A Isolatable Relay On A Plate

A24V 5A polarised relay designed for use in 24V fire alarm systems. Includes a keyswitch isolation facility allowing the relay operation to be temporarily disabled during routine test and maintenanceto prevent autodiallers, water sprinklers, rollershutters, etc., from activating. When isolated, theunits Isolated LED will flash and a warning beeper will sound every 8seconds to ensure devices are not inadvertently left in the isolated state. Relay is triggerable via a control panels open collector output or a standard polarised fire alarm sounder circuit (if connecting to a sounder circuit, the relay will return to its normal state when the fire condition is cleared or silenced check with the approving authority that this arrangement is acceptable prior to installation). Fits on standard UK 25mm flush or surface mount back boxes.

GBP 188.93
1

4x C-TEC 12V Relay Unit

4x C-TEC 12V Relay Unit

A general purpose, double-pole, polarised 12V 5A relay ideal for triggering sirens, strobes, door releases and other third-party equipmentconnected to an800 Series call system. Can be triggered directly from any of the call systems signal lines provided +12V and -V are supplied to its supply terminals. Typically used to switch extra low voltages. Can also switch Mains voltages provided the guidelines in the main instructions arefollowed. Incorporates a high intensity LED which illuminates red when the relay is active Includes a white write on areafor the addition of personalised text such as equipment locations.

GBP 223.96
1

10x C-TEC ActiV Relay Base with Diode

10x C-TEC ActiV Relay Base with Diode

Compatible with C-TECs entire range of ActiV firedetectors. Includesa1A @ 24 VDC relay controlled by detectors remote LED output. Ideal for switching CCTV, security and door retaining systems. Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors. Easy to fit with lots of working space. Can be ceiling mounted in any orientation due to the true 360 degree viewing angle of the LED indicator strips on all ActiV detectors. Integrated detector/base locking mechanism, head removal tool and ID tag. Simple click and twist design. Remote LED terminals for the optional connection to a BF318 Remote indicator. C4408R non-diode relay base also available for use on systems that do not require head out monitoring.

GBP 209.90
1

4x C-TEC CAST Zone Monitor Module

4x C-TEC CAST Zone Monitor Module

LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13. A single-zone addressable Zone Monitor capable of supporting up to 20 conventional fire detectors and 10 MCPs Mountable on a standard UK 25mm double gang back box. Onboard short-circuit loop isolator. 4mA typical alarm current (1.1mA typical quiescent current) @ 22-40V DC. Indicators for Loop polling, input faults and relay status. Alternatively, can be used as general purpose input monitor. Mountable on a C-TEC NCP-26 surface box or a standard UK 25mm double gang back box (not supplied).

GBP 207.96
1

5x C-TEC CAST Mini I/O Unit

5x C-TEC CAST Mini I/O Unit

LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13. Includes a switch monitor, signal relay and onboard loop isolator. 7mA typical alarm current (1mA typical quiescent current) @ 22-40V DC. Four plastic tabs for surface or panel mounting. Includes a 1A 30V DC volt-free changeover relay. Can also switch 0.3A @125V AC. Offers Switch +Ve, Ve, LED +V, Ve and changeover relay connections Future header pin offers expansion opportunities for peripheral I/O devices.

GBP 214.95
1

7x C-TEC Call Latch Module

7x C-TEC Call Latch Module

A discreetmonitoring modulethat allows any device with a normally open or normally closed switch to generate aStandard call on an 800 Series Call System. Measures just 25 x 20 x 15mm ideal for locating inside or alongside themonitored device. Red reassurance LED illuminates when a call is made. Can be connected topanic buttons, door bells,radio receiver transmitter pairs, ultra-sonic receiver transmitter pairs, etc. Requires a separate reset point. Mountsusing a self-adhesive pad (supplied).

GBP 328.93
1

C-TEC ZFP Touchscreen Control Module, Apollo protocol

C-TEC ZFP Touchscreen Control Module, Apollo protocol

Supplied as standard in all pre-built ZFP Apollo panels and all core ZFP Apollo panels. Includes a user-friendly full-colour 4.3 inch 480 x 272 pixel LCD touchscreen. Separate distinct LEDs for mandatory EN54 indications plus five spare engineer programmable LEDs. Keyswitch or dynamic touchscreen button access to AL2 (Authorised User Level). Digital QWERTY keyboard. Touchscreen can be customised to include a company logo (.gif) Galvanically isolated USB port (for system programming). Indicator naming template (Microsoft Word format) downloadablefrom the Documentation tab below.

GBP 749.99
1