51 results (0,15134 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

TI 52 E7IT-1 MIG Flux Cored Wire 1.2mm 16Kg

TI 52 E7IT-1 MIG Flux Cored Wire 1.2mm 16Kg

Seamless rutile flux cored wire for single- or multilayer welding of Carbon, Carbon-Manganese steels and similar types of steels including fine grain steels with Argon-CO2 shielding gas or pure CO2. This wire is especially suitable for ship building, structural steel work or wherever good bead appearance is required. D1.8 Seismic Supplement approved. Typical hydrogen value 2.5 3.5ml/100g weld metal. Benefits: Excellent weldability in all positions with high performance welding speed Very low spatter losses Good bead appearance Fast freezing and easy to remove slag

GBP 269.99
1

Thermanit JE-308L SI Stainless Steel MIG Wire - 1.0mm

Thermanit JE-308L SI Stainless Steel MIG Wire - 1.0mm

Bohler THERMANIT JE-308L SI Stainless Steel MIG Wire is a high-quality, low-carbon austenitic stainless steel wire that is ideal for welding a wide range of stainless steel grades, including 18/8 CrNi (N) and CrNiMo (N) steels/cast steel grades. It is also suitable for joining and surfacing applications with matching and similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Benefits: Excellent weldability and feeding characteristics High-quality welds with low spatter Good corrosion resistance, even at high temperatures Suitable for welding a wide range of stainless steel grades

GBP 429.99
1

Thermanit JE-308L SI Stainless Steel MIG Wire - 1.2mm

Thermanit JE-308L SI Stainless Steel MIG Wire - 1.2mm

Bohler THERMANIT JE-308L SI Stainless Steel MIG Wire is a high-quality, low-carbon austenitic stainless steel wire that is ideal for welding a wide range of stainless steel grades, including 18/8 CrNi (N) and CrNiMo (N) steels/cast steel grades. It is also suitable for joining and surfacing applications with matching and similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Benefits: Excellent weldability and feeding characteristics High-quality welds with low spatter Good corrosion resistance, even at high temperatures Suitable for welding a wide range of stainless steel grades

GBP 411.25
1

TI 46-FD Flux Cored MIG Welding Wire 1.2MM - 16KG

TI 46-FD Flux Cored MIG Welding Wire 1.2MM - 16KG

Benefits: Ultra low hydrogen weld metal Total resistance against moisture absorption during storage and use - less wasted wire Enhanced travel speed and arc stability in positional welding More spray arc weld time Low contact tip wear Low spatter Good weldability Good wetting Rust resistance Low fume emission Automatic slag detachability Less post weld cleaning No wire breaks Flat root pass Typical Applications: General construction such as bridges and stadiums Medium and thin-plate welding e.g. in automotive industry and shipbuildingKey features Seamless cored wire Stable and sharp arc Excellent feedability Copper coated Fast freezing rutile slag system Typical applications are in general construction and medium and thin-plate welding

GBP 219.99
1

Leather Flame Resistant Welding Trousers - 2XL

Leather Flame Resistant Welding Trousers - 2XL

Made from premium quality leather, these trousers are designed to withstand the rigors of welding, while providing you with the comfort and mobility you need to do your job safely and efficiently. Benefits: Stay safe and protected from the heat and sparks of welding. Enjoy the comfort and mobility you need to do your job safely and efficiently. Get a durable pair of welding trousers that will last for years. Features: Made from premium quality leather for maximum protection from heat and sparks. Flame resistant design to keep you safe in the heat of the moment. Comfortable and mobile design for all-day wear. Durable construction for long-lasting performance.

GBP 183.99
1

Leather Flame Resistant Welding Jacket - 2XL

Leather Flame Resistant Welding Jacket - 2XL

Looking for a welders jacket or coat that offers the ultimate protection from heat, sparks, and spatter? Look no further than the Bohler Leather Flame Resistant Welding Jacket. Made from high-quality leather, this jacket is designed to withstand the rigors of even the most demanding welding applications. Benefits: Blue Cow Split Leather for durability and thermal insulation FR cotton for lighter wearing comfort, less perspiration Push buttons for secure closing and safer for fast opening Pockets for your tools and personal belongings 100% aramid fibre stitching for highest durability of the seams Certified according to ISO 13688 and EN ISO 11611:2015 Class 2 - A1

GBP 183.99
1

UTP Robotic 600 Hardfacing MIG Wire 1.2mm - EN 14700

UTP Robotic 600 Hardfacing MIG Wire 1.2mm - EN 14700

Gas-shielded metal-cored hardfacing MIG wire UTP ROBOTIC 600 is a seamless, chromium-alloyed, metal-cored wire for wear-resistant hardfacing applications on parts subject to a combination of pressure, impact and abrasion wear. Very good weldability in comparison to solid wires, good resistance to abrasion, minimized slag formation with easy slag removal. Thanks to its constant wire feed and excellent weldability, this wire is especially suited for automated welding. 1 spool = 16kg Benefits: Seamless copper coated cored wire All positional weldability Excellent smooth wire feeding Spatter free spray arc transfer Reduced contact tip wear Application: Cutting tools, especially cutting edges of presses in ceramic tiles production Jaw crushers Baffle plates

GBP 399.99
1

UTP A 651 29.9 TIG Rod ER 312 - 5kg Tube - 2.4mm

UTP A 651 29.9 TIG Rod ER 312 - 5kg Tube - 2.4mm

UTP A 651 is a welding wire that is suitable for joining and surfacing of steels of difficult weldability, repair of hot and cold working steels, and cushioning layers. The weld metal of UTP A 651 is scale resistant up to 1150 C, crack and wear resistant, stainless, and work hardening. This makes it a versatile and durable wire that can be used in a variety of applications. Benefits: Suitable for joining and surfacing of steels of difficult weldability Repair of hot and cold working steels Cushioning layers Scale resistant up to 1150 C Crack and wear resistant Stainless Work hardening Ordering UTP A 651 1.6mm x 1000mm - 37442 UTP A 651 2.4mm x 1000mm - 37444

GBP 339.99
1

UTP A 651 29.9 TIG Rod ER 312 - 5kg Tube - 1.6mm

UTP A 651 29.9 TIG Rod ER 312 - 5kg Tube - 1.6mm

UTP A 651 is a welding wire that is suitable for joining and surfacing of steels of difficult weldability, repair of hot and cold working steels, and cushioning layers. The weld metal of UTP A 651 is scale resistant up to 1150 C, crack and wear resistant, stainless, and work hardening. This makes it a versatile and durable wire that can be used in a variety of applications. Benefits: Suitable for joining and surfacing of steels of difficult weldability Repair of hot and cold working steels Cushioning layers Scale resistant up to 1150 C Crack and wear resistant Stainless Work hardening Ordering UTP A 651 1.6mm x 1000mm - 37442 UTP A 651 2.4mm x 1000mm - 37444

GBP 349.99
1

Guardian Heavy Duty Battery (7.800 mAh) for Air 57075

Guardian Heavy Duty Battery (7.800 mAh) for Air 57075

Get up to 14 hours of battery life with the Bohler Guardian Heavy Duty Battery. This high-capacity battery is perfect for welders who need a reliable power source for their PAPR system. The battery is also lightweight and easy to carry, so you can stay comfortable and productive all day long. Benefits: Stay productive all day long with a long-lasting battery life Avoid downtime from having to recharge your battery too often Stay comfortable with a lightweight and easy-to-carry battery Features Up to 14 hours of battery life High-capacity (7.800 mAh) Lightweight and easy to carry Compatible with all Bohler Guardian PAPR systems Compatibility Bohler Guardian 62 Air Bohler Guardian 62F Air

GBP 409.99
1

Air Motor for Guardian Welding Helmets 86668

Air Motor for Guardian Welding Helmets 86668

The replacement Bohler Air Motor for Guardian Welding Helmets is a powerful and reliable motor that provides a constant airflow of 180-230 litres per minute. This helps to protect the welder from harmful fumes and particles, while also providing a comfortable and breathable environment. The Bohler Air Motor is also extremely quiet, making it ideal for use in noisy welding environments. It is also very easy to maintain, with simple filter changes that can be done in minutes. Compatibility Guardian 50M Air Guardian 50FM Air Benefits: Powerful and reliable motor provides constant airflow of 180-230 liters per minute Protects the welder from harmful fumes and particles Provides a comfortable and breathable environment Extremely quiet, making it ideal for use in noisy welding environments Very easy to maintain

GBP 399.99
1

Union AlMg 5 Aluminium MIG Wire - ER5356 - 1.0mm

Union AlMg 5 Aluminium MIG Wire - ER5356 - 1.0mm

Benefits: Seawater resistant: Provides strong, durable welds that are resistant to corrosion from seawater. Good colour match with base metal after anodising: Results in a weld that is aesthetically pleasing and has the same corrosion resistance as the base metal. Easy to use with MIG welding machines: Can be used with a variety of MIG welding machines, making it a versatile option for welders. Long shelf life: Can be stored for long periods of time without losing its properties. Cost-effective: Provides good value for money, making it a budget-friendly option for welders. Features Ideal for welding aluminium alloys containing up to 5% magnesium Provides strong, durable welds that are resistant to corrosion from seawater Good colour match with base metal after anodising Easy to use with MIG welding machines Applications Marine applications Architectural applications Transportation applications Industrial applications Other applications where corrosion resistance is required

GBP 209.99
1

Union AlMg 5 Aluminium MIG Wire - ER5356 - 1.2mm

Union AlMg 5 Aluminium MIG Wire - ER5356 - 1.2mm

Benefits: Seawater resistant: Provides strong, durable welds that are resistant to corrosion from seawater. Good colour match with base metal after anodising: Results in a weld that is aesthetically pleasing and has the same corrosion resistance as the base metal. Easy to use with MIG welding machines: Can be used with a variety of MIG welding machines, making it a versatile option for welders. Long shelf life: Can be stored for long periods of time without losing its properties. Cost-effective: Provides good value for money, making it a budget-friendly option for welders. Features Ideal for welding aluminium alloys containing up to 5% magnesium Provides strong, durable welds that are resistant to corrosion from seawater Good colour match with base metal after anodising Easy to use with MIG welding machines Applications Marine applications Architectural applications Transportation applications Industrial applications Other applications where corrosion resistance is required

GBP 199.99
1

UTP Wearstick Dur 600 Hardfacing Welding Electrodes - EN 14700 - Box - 5.0 X 450mm

UTP Wearstick Dur 600 Hardfacing Welding Electrodes - EN 14700 - Box - 5.0 X 450mm

Basic-coated hardfacing welding rods UTP DUR 600 is universally applicable for cladding on parts of steel, cast steel and high Mn-steel, subject simultaneously to abrasion, impact and compression. Typical application fields are the earth moving and stone treatment industry, e.g. excavator teeth, bucket knives, crusher jaws and cones, mill hammers etc., but also for cutting edges on cold cutting tools. UTP DUR 600 has excellent welding properties due to a quiet arc, an even flow and a good weld build-up, easy slag removal. Machining of the weld metal is possible by grinding. Benefits: Increased service life of components Reduced downtime and maintenance costs Improved productivity Enhanced safety Features: Universally applicable for cladding on parts of steel, cast steel, and high Mn-steel Excellent welding properties: quiet arc, even flow, good weld build-up Highly resistant to abrasion, impact, and compression Machinable by grinding

GBP 179.99
1

UTP Wearstick Dur 600 Hardfacing Welding Electrodes - EN 14700 - Box - 3.2 X 350mm

UTP Wearstick Dur 600 Hardfacing Welding Electrodes - EN 14700 - Box - 3.2 X 350mm

Basic-coated hardfacing welding rods UTP DUR 600 is universally applicable for cladding on parts of steel, cast steel and high Mn-steel, subject simultaneously to abrasion, impact and compression. Typical application fields are the earth moving and stone treatment industry, e.g. excavator teeth, bucket knives, crusher jaws and cones, mill hammers etc., but also for cutting edges on cold cutting tools. UTP DUR 600 has excellent welding properties due to a quiet arc, an even flow and a good weld build-up, easy slag removal. Machining of the weld metal is possible by grinding. Benefits: Increased service life of components Reduced downtime and maintenance costs Improved productivity Enhanced safety Features: Universally applicable for cladding on parts of steel, cast steel, and high Mn-steel Excellent welding properties: quiet arc, even flow, good weld build-up Highly resistant to abrasion, impact, and compression Machinable by grinding

GBP 179.99
1

Standard Battery for Guardian Air PAPR 5, 200mAh 86660

Standard Battery for Guardian Air PAPR 5, 200mAh 86660

The Bohler Standard Battery is the perfect replacement battery for your Guardian Air PAPR. It has a capacity of 5, 200mAh, which provides up to 12 hours of continuous operation, so you can work all day long without having to worry about running out of power. The battery is also lightweight and easy to replace, so you can get back to work quickly and easily. And it comes with a one-year warranty, so you can be confident in its quality and reliability. Benefits: Stay powered up all day long with the Bohler Standard Battery's long-lasting capacity Get back to work quickly and easily with the battery's lightweight and easy-to-replace design Be confident in the quality and reliability of the battery with its one-year warranty Features 5, 200mAh capacity for up to 12 hours of continuous operation Lightweight and easy to replace One-year warranty Compatibility Guardian 50M Air Guardian 50FM Air

GBP 279.99
1

NI 1-IG Medium Alloyed TIG Welding Rod ER80S-G Carton - 2.4mm

NI 1-IG Medium Alloyed TIG Welding Rod ER80S-G Carton - 2.4mm

Bohler Ni 1-IG is a medium alloyed TIG welding rod for unalloyed and Ni-alloyed fine grained construction steels. It produces a tough, crack resistant weld deposit with low temperature toughness down to -80C. Bohler Ni 1-IG is ideal for thin sheets and root pass welding in cryogenic constructional steels and Ni-steels, cryogenic steels for ship building, and other high strength applications. Benefits: Produce high quality welds with excellent toughness and crack resistance. Weld a wide range of materials, including cryogenic steels and Ni-steels. Weld thin sheets and root passes with confidence. Use a product that is approved by leading welding organisations. Features: Medium alloyed for high strength and crack resistance. Low temperature toughness down to -80C. Ideal for thin sheets and root pass welding. Approved by TV, DNV GL, BV, Equinor, NAKS, and CE. Applications: Cryogenic constructional steels. Ni-steels. Cryogenic steels for ship building. Other high strength applications.

GBP 229.99
1

Fox A7-A 307 Stainless Steel Electrodes - Tin - 3.2 X 350mm

Fox A7-A 307 Stainless Steel Electrodes - Tin - 3.2 X 350mm

Bohler Fox A7-A is a versatile rutile basic coated austenitic electrode that can be used for welding and cladding in all positions except vertical down. It is a great choice for numerous applications, including welding of "hard-to-weld" steels, dissimilar welding, repair, and maintenance. The weld metal offers exceptionally high ductility and elongation together with outstanding crack resistance. It is also resistant to embrittlement, scaling, and cavitation. The weld deposit is easy to handle on AC or DC and offers high ductility, elongation, and resistance to hot cracking. Benefits: Get first-class weld seams with ease. Weld "hard-to-weld" steels with confidence. Use for dissimilar welding, repair, and maintenance. Enjoy exceptional performance in a variety of applications. Features: Versatile electrode for numerous applications. Exceptionally high ductility and elongation. Outstanding crack resistance. Resistant to embrittlement, scaling, and cavitation. Easy to handle on AC or DC. High ductility, elongation, and resistance to hot cracking.

GBP 199.99
1

Fox A7-A 307 Stainless Steel Electrodes - Tin - 4.0 X 350mm

Fox A7-A 307 Stainless Steel Electrodes - Tin - 4.0 X 350mm

Bohler Fox A7-A is a versatile rutile basic coated austenitic electrode that can be used for welding and cladding in all positions except vertical down. It is a great choice for numerous applications, including welding of "hard-to-weld" steels, dissimilar welding, repair, and maintenance. The weld metal offers exceptionally high ductility and elongation together with outstanding crack resistance. It is also resistant to embrittlement, scaling, and cavitation. The weld deposit is easy to handle on AC or DC and offers high ductility, elongation, and resistance to hot cracking. Benefits: Get first-class weld seams with ease Weld "hard-to-weld" steels with confidence Use for dissimilar welding, repair, and maintenance Enjoy exceptional performance in a variety of applications Features: Versatile electrode for numerous applications Exceptionally high ductility and elongation Outstanding crack resistance Resistant to embrittlement, scaling, and cavitation Easy to handle on AC or DC High ductility, elongation, and resistance to hot cracking

GBP 189.99
1

UTP Wearstick XD 61 Hardfacing Welding Electrodes - EN 14700 - Box - 5.0 X 450mm

UTP Wearstick XD 61 Hardfacing Welding Electrodes - EN 14700 - Box - 5.0 X 450mm

UTP WEARSTICK XD 61, formerly LEDURIT 61 Hardfacing Electrodes, are a premium choice for applications where extreme abrasion resistance is required. These electrodes are designed to deposit a high-chromium alloy that is exceptionally hard and durable. They are also impact and heat resistant, making them ideal for use in a wide range of demanding environments. WEARSTICK XD 61 Hardfacing Electrodes are typically used to protect metal surfaces from wear and tear caused by abrasion, erosion, and impact. They are commonly used in the following industries: Mining Construction Agriculture Oil and gas Power generation Transportation Benefits: Protects metal surfaces from wear and tear Extends the life of equipment Reduces downtime and maintenance costs Improves productivity Applications Earthmoving equipment Crushers and grinders Excavator buckets Bulldozer blades Conveyor systems Pump and valve components Coal pulverizer hammers Oilfield drill bits Features Extreme abrasion resistance Impact and heat resistance Easy to use Produces a smooth, uniform weld bead Available in a variety of sizes

GBP 399.99
1

UTP Wearstick XD 61 Hardfacing Welding Electrodes - EN 14700 - Box - 3.2 X 350mm

UTP Wearstick XD 61 Hardfacing Welding Electrodes - EN 14700 - Box - 3.2 X 350mm

UTP WEARSTICK XD 61, formerly LEDURIT 61 Hardfacing Electrodes, are a premium choice for applications where extreme abrasion resistance is required. These electrodes are designed to deposit a high-chromium alloy that is exceptionally hard and durable. They are also impact and heat resistant, making them ideal for use in a wide range of demanding environments. WEARSTICK XD 61 Hardfacing Electrodes are typically used to protect metal surfaces from wear and tear caused by abrasion, erosion, and impact. They are commonly used in the following industries: - Mining - Construction - Agriculture - Oil and gas - Power generation - Transportation Benefits: - Protects metal surfaces from wear and tear - Extends the life of equipment - Reduces downtime and maintenance costs - Improves productivity Applications: - Earthmoving equipment - Crushers and grinders - Excavator buckets - Bulldozer blades - Conveyor systems - Pump and valve components - Coal pulverizer hammers - Oilfield drill bits Features: - Extreme abrasion resistance - Impact and heat resistance - Easy to use - Produces a smooth, uniform weld bead - Available in a variety of sizes

GBP 359.99
1

Fox cm 2 KB Low Hydrogen Electrodes E9018-B3 - Carton - 2.5mm X 250mm

Fox cm 2 KB Low Hydrogen Electrodes E9018-B3 - Carton - 2.5mm X 250mm

Bohler FOX CM 2 KB is a high-performance welding electrode that is ideal for welding creep-resistant boiler steels. It has excellent creep rupture strength, making it a reliable choice for applications where long-term durability is critical. The electrode also has a low hydrogen content, which helps to prevent cracking. The deposit is crack-resistant and ductile, making it easy to weld and manipulate. Bohler FOX CM 2 KB can be welded in all positions except vertical down. The deposit is nitridable and heat treatable, making it a versatile choice for a variety of applications. If you are looking for a high-performance welding electrode for creep-resistant boiler steels, then Bohler FOX CM 2 KB is the perfect choice for you. It is a reliable, durable, and versatile electrode that will meet your needs. Benefits: - Excellent creep rupture strength - Low hydrogen content - Crack-resistant and ductile deposit - Good weldability in all positions except vertical down - Nitridable and heat treatable

GBP 399.99
1

Guardian 50M Air Welding Helmet 86669

Guardian 50M Air Welding Helmet 86669

The Bohler Guardian 50M Air Fed Welding Helmet is the perfect choice for welders who demand the best in respiratory protection and comfort. This helmet features a Powered Air Purifying Respirator (PAPR) system that supplies the welder with filtered, clean air, protecting them from harmful welding fumes and other airborne contaminants. The Guardian 50M also features a large viewing area with true color technology, providing the welder with excellent visibility. Additionally, the helmet is lightweight and comfortable to wear, even for extended periods of time. Benefits: Protect yourself from harmful welding fumes and other airborne contaminants See your work clearly and accurately, thanks to the true color technology Work comfortably and efficiently, even for long periods of time Be assured that your helmet is always performing at its best, thanks to the visual and audible warnings Features Welding helmet (matt) ADF: Shade 4, 9-13 External shade adjustment knob Grind mode button 50 x 100 mm - True Colour EN 379 classification 1/1/1/2 Applications MIG welding TIG welding Stick welding Plasma cutting Grinding

GBP 339.99
1

Particle Filter P R SL for Air PAPR 57106 - 16

Particle Filter P R SL for Air PAPR 57106 - 16

Protect yourself from harmful welding fumes and dust with the Bohler Particle Filter P R SL for Bohler Air PAPR. This filter provides the highest level of protection, meeting the TH3 standard and removing 99.8% of particles from the air. It is also compatible with the Bohler Air PAPR's heavy-duty battery, providing up to 14 hours of continuous operation on a single charge. The Bohler Particle Filter P R SL is easy to install and replace, and it is designed to fit comfortably on the Bohler Air PAPR. It is also highly durable and can withstand even the most demanding welding environments. Benefits: Protect yourself from harmful welding fumes and dust Breathe easy with clean, filtered air Stay comfortable and productive all day long Reduce downtime and maintenance costs Features Highest level of protection (TH3) Removes 99.8% of particles from the air Compatible with Bohler Air PAPR heavy-duty battery Up to 14 hours of continuous operation on a single charge Easy to install and replace Comfortable fit Highly durable Compatibility Guardian 62 Air Guardian 62F Air Bohler Air

GBP 309.99
1

UTP 8 Hardfacing Welding Rod - EN ISO 1071 - 3.2 X 350mm

UTP 8 Hardfacing Welding Rod - EN ISO 1071 - 3.2 X 350mm

Graphite-basic coated hardfacing welding rod UTP 8 is for cold welding of grey and malleable cast iron, cast steel and for joining these base metals to steel, copper and copper alloys, especially for repair and maintenance. UTP 8 has excellent welding properties. The easily controllable flow permits spatter-free welding in all positions and with minimal amperage. The weld deposit and the transition zones are fillable. No undercutting. Ideally suited for the combined welding with the ferro-nickel type UTP 86 FN (buttering with UTP 8 and filling with UTP 86 FN). Benefits: - Graphite-basic coating that produces a smooth, spatter-free weld in all positions with minimal amperage. - Produces a weld deposit that is easily filled and has no undercut, even in difficult areas. - Can be used for cold welding of grey and malleable cast iron, cast steel, and for joining these base metals to steel, copper, and copper alloys. - Can be used in combination with the ferro-nickel type UTP 86 FN to create a weld deposit with even greater wear resistance.

GBP 199.99
1