74 results (0,19699 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Advanced Spare Zone Active End-of-Line Module Pack of 5 EXP-006

Advanced Spare Zone Active End-of-Line Module Pack of 5 EXP-006

Spare Zone Active End-of-Line Module pack of 5 EXP-006The EXP-006 module provides active end of line monitoring for zone circuits fitted with detector diode bases in accordance with BS5839-1 the module will create a fault condition on the panel if a detector is removed from its base without affecting the remainder of the zone.CompatibilityCompatible with the ExGo Series Gas Extinguishing Panel input circuits.LimitationsFor use in gas extinguishing installations where an EOL module is required.

GBP 61.18
1

Advanced AXIS-WSM Intelligent Sounder Interface Module

Advanced AXIS-WSM Intelligent Sounder Interface Module

Advanced AXIS-WSM Intelligent Sounder Interface ModuleThe Intelligent Sounder Interface Module is designed to allow the use of the Axis-CWS conventional sounder and Axis-CWSV conventional sounder beacon on an EvacGo intelligent loop.The Axis-WSM module is compatible with intelligent control panels and systems using Axis EN protocol. Easy to install it incorporates built-in short circuit loop isolation.Once installed onto an EvacGo intelligent loop the device is fully addressable and benefits from an extensive range of intelligent control and monitoring functionality.Key FeaturesFlexible modular designEasy to installManual and auto addressing optionsBuilt-in short circuit isolatorsUp to 32 tones as standardOptional microphone self-test facilityAddressing using the device programming tool or auto addressing capability via the fire control panelFits EvacGo modular wall sounders and sounder beacons

GBP 40.80
1

Advanced Dynamix PC-NET-005-SWM4R MxPro Smart Watch Module - 4 Inputs

Advanced Dynamix PC-NET-005-SWM4R MxPro Smart Watch Module - 4 Inputs

Advanced Dynamix PC-NET-005-SWM4R MxPro Smart Watch Module - 4 InputsThe Smart Watch Module SWM is a device used in conjunction with the PC-Net Graphical Software Suite offered by Advanced and is used for the control and diagnostics of remote site applications.The Smart Watch Module SWM uses Static TCPIP addressing over Local Area Network LAN or Wide Area Network WAN applications limiting the need for additional cabling and allowing remote sites to be monitored over a network fromacentrally located Graphical Software Suite. The Smart Watch Modules SWM cleveruse of TCPIP technology provides the user with an ultimate level of control for all their Fire products worldwide.The SWM is supplied in two variations one for remote control and diagnostics of Addressable System Installations and the other for Conventional.

GBP 1321.54
1

Advanced Dynamix PC-NET-005-SWM6 MxPro Smart Watch Module 4-6 panel

Advanced Dynamix PC-NET-005-SWM6 MxPro Smart Watch Module 4-6 panel

Advanced Dynamix PC-NET-005-SWM6 MxPro Smart Watch Module 4-6 panelThe Smart Watch Module SWM is a device used in conjunction with the PC-Net Graphical Software Suite offered by Advanced and is used for the control and diagnostics of remote site applications.The Smart Watch Module SWM uses Static TCPIP addressing over Local Area Network LAN or Wide Area Network WAN applications limiting the need for additional cabling and allowing remote sites to be monitored over a network fromacentrally located Graphical Software Suite.The Smart Watch Modules SWM cleveruse of TCPIP technology provides the user with an ultimate level of control for all their Fire products worldwide.The SWM is supplied in two variations one for remote control and diagnostics of Addressable System Installations and the other for Conventional.

GBP 2501.04
1

Advanced Dynamix PC-NET-005-SWM MxPro Smart Watch Module

Advanced Dynamix PC-NET-005-SWM MxPro Smart Watch Module

Advanced Dynamix PC-NET-005-SWM MxPro Smart Watch ModuleThe Smart Watch Module SWM is a device used in conjunction with the PC-Net Graphical Software Suite offered by Advanced and is used for the control and diagnostics of remote site applications.The Smart Watch Module SWM uses Static TCPIP addressing over Local Area Network LAN or Wide Area Network WAN applications limiting the need for additional cabling and allowing remote sites to be monitored over a network fromacentrally located Graphical Software Suite.The Smart Watch Modules SWM cleveruse of TCPIP technology provides the user with an ultimate level of control for all their Fire products worldwide.The SWM is supplied in two variations one for remote control and diagnostics of Addressable System Installations and the other for Conventional.

GBP 1254.25
1

Advanced Dynamix MxPro PC-NET-005-SWM15 Smart Watch Module 7-15 panel

Advanced Dynamix MxPro PC-NET-005-SWM15 Smart Watch Module 7-15 panel

Advanced Dynamix MxProPC-NET-005-SWM15 Smart Watch Module 7-15 panelThe Smart Watch Module SWM is a device used in conjunction with the PC-Net Graphical Software Suite offered by Advanced and is used for the control and diagnostics of remote site applications.The Smart Watch Module SWM uses Static TCPIP addressing over Local Area Network LAN or Wide Area Network WAN applications limiting the need for additional cabling and allowing remote sites to be monitored over a network fromacentrally located Graphical Software Suite.The Smart Watch Modules SWM cleveruse of TCPIP technology provides the user with an ultimate level of control for all their Fire products worldwide.The SWM is supplied in two variations one for remote control and diagnostics of Addressable System Installations and the other for Conventional.Key FeaturesSmall and CompactRemote Network Control DiagnosticsPowerTCPIP Communication via Static IPDirect connectivity to BMSGraphical Interface via RS232Connect up to 255 Remote SitesSupports up to 15 remote panels per siteConfigured using Graphical Software

GBP 4719.50
1

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In IsolatorThe single output module is loop powered designed around a fully digital protocol and provides control by activating equipment for DDA compliance such as vibrating pillows. The output channel is monitored and will detect open and short circuit conditions.The unit provides a fast and secure response and incorporates a bidirectional short circuit isolator. Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm.The unit is supplied fixed to a plate which is suitable for wall mounting. Standard 25mm or deep 47mm mounting boxes are available.Key FeaturesShort circuit isolators in each device to the requirements of EN54- 17Auto addressing capability by the control panel or manually using a handheld programmerDigital checking of double addressLine quality informationBicolour red green LED driven by the control panel

GBP 131.62
1

Advanced 20-VMMC120-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMMC120-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMMC120-ADV Single Relay Powered Output Module With Built In IsolatorThe single relay output module is loop-powered designed around a fully digital protocol and provides form C changeover contacts for control of equipment for DDA compliance such as vibrating pillows.The output channel is a normally de-energised relay switched on by a command from the control panel.The unit provides a fast and secure response and incorporates a bidirectional short circuit isolator. Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm .The unit can be mounted within an electrical box or enclosure.Key FeaturesShort circuit isolators in each device to the requirements of EN54-17Auto addressing capability by the control panel or manually using a hand-held programmerAuto-addressing capability by the control panelDigital checking of double addressLine quality informationBicolour redgreen LED driven by the control panel

GBP 78.97
1

Advanced MxPro5 MXP-046-BX1 Damper Interface Module - Boxed Apollo Protocol

Advanced MxPro5 MXP-046-BX1 Damper Interface Module - Boxed Apollo Protocol

Advanced MxPro5 MXP-046-BX1 Damper Interface Module - Boxed Apollo ProtocolThe Advanced Damper Interface is a loop driven device that utilises the Apollo protocol. The device is a fully monitored interface providing confirmation of the damper open and closed positions.For use with dampers that are normally held open. Fail-safe operation only applicable to electrically opened mechanically closed dampers.Key FeaturesDamper motor drive and limit switch monitoring integrated into a single unitDual limit switch inputs for confirmation of damper-fully-open and damper-fully-closed positionsSelectable monitoring on switch inputs to prevent short circuits in the wiring from giving false position readingsFail-safe options in case of data errors in the communications loop

GBP 616.15
1

Advanced Latch Stretch Input Card - MXP-053

Advanced Latch Stretch Input Card - MXP-053

Advanced Latch Stretch Input Card - Mxp-053The Mxp-053 Input Latch Stretch Module will provide monitoring for two momentary switch inputs. The module can be configured for Latch or Stretch Modes of operation. The module can be configured for wiring supervision using the End-of-Line resistor of the host input device. A reset input is provided for the reset of a latched condition.Can be used to monitor the operation of a momentary switched input that has been interfaced to the fire alarm control panel via loop devices or onboard inputs. Two modes of operation are available for momentary switched operation Latched or Stretched 30 Seconds. Can be powered by a separate 24V DC supply or loop powered.Key FeaturesTwo modes of operation - Latched or Stretched Monitored or Non-monitored connectivityLoop powered Configurable for Advanced Apollo Hochiki and Nittan input circuitsThe module can be loop powered3-year warranty as standard

GBP 115.84
1

Advanced 20-DLVMX100-BX Dual Isolator In Mounting Box

Advanced 20-DLVMX100-BX Dual Isolator In Mounting Box

Advanced 20-DLVMX100-BX Dual Isolator In Mounting BoxThe dual boxed isolator module is designed to provide protection against short circuits and faults in flats and apartments. The unit operates with the EvacGo control panel to provide high rates of information exchange in combination with particular features that ensure fast and secure responses.Key FeaturesDesigned to operate with EvacGo control panelsPassive device does not need to be addressedIsolates the adjacent loop section where the short circuit occurredAll functions of devices situated on opposite loops section of the module are unaffectedRestores power to the isolated loop section when short circuit is removedDesigned to comply with the BS 8629 Code of Practice

GBP 107.58
1

Advanced 20-LVMX100-BX Single Isolator In Mounting Box

Advanced 20-LVMX100-BX Single Isolator In Mounting Box

Advanced 20-LVMX100-BX Single Isolator In Mounting BoxThe single boxed isolator module is designed to provide protection against short circuits and faults in flats and apartments in single floor evacuation zones. The unit operates with the EvacGo control panel to provide high rates of information exchange in combination with particular features that ensure fast and secure responses.Key FeaturesDesigned to operate with EvacGo control panelsPassive device does not need to be addressedIsolates the adjacent loop section where the short circuit occurredAll functions of devices situated on opposite loops section of the module are unaffectedRestores power to the isolated loop section when short circuit is removedDesigned to comply with the BS 8629 Code of Practice

GBP 72.38
1

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay CardThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro 5 MXP-544F P-BUS 8-Way Relay Card FittedThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced Dynamix PC-NET-005-SCU MxPro Smart Cube Unit

Advanced Dynamix PC-NET-005-SCU MxPro Smart Cube Unit

Advanced DynamixPC-NET-005-SCU MxProSmart Cube UnitSmart Cube Unit for use with a Smart Watch Module.The Smart Watch Module SWM is a device used in conjunction with the PC-Net Graphical Software Suite offered by Advanced and is used for the control and diagnostics of remote site applications.The Smart Watch Module SWM uses Static TCPIP addressing over Local Area Network LAN or Wide Area Network WAN applications limiting the need for additional cabling and allowing remote sites to be monitored over the Internet from a single and centrally located Graphical Software Suite.The Smart Watch Modules SWM clever use of TCPIP technology provides the user with an ultimate level of control for all their Fire products worldwide.The SWM is supplied in two variations one for remote control and diagnostics of Addressable System Installations and the other for Conventional.

GBP 6011.15
1

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor Module

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor Module

Advanced MxPro 5 MXP-538 P-BUS 16-Way Switch Form Factor ModuleThe 16-way Switch 48 LED Card is an expansion peripheral that offers 16 inputs and 48 outputs that can be configured via the Advanced PC Config Tool. This additional PCB provides a cost effective solution to providing 16 individually programmable push buttons for controlling fire alarm equipment.Up to 16 cards can be connected to a MxPro 5 series panel providing a maximum of 256 push buttons and 768 LED outputs. Each LED output can be individually assigned to an output group to provide full support for dynamic zoning and to indicate when the buttons have been activated.ApplicationsIdeal for any application where a number of programmable push button switches are required for evacuation and plant control.Key Features16 configurable push buttons48 Programmable LEDs 3 x LEDs per push button red green yellowConfigurable buzzerFast input responseUp to 16 switch plates for each control panel

GBP 374.58
1