Afișează toate filtrele

Marcă

Comerciant

Resetare filtru

Produse
De la
Magazine

Senzor de Mișcare goobay 95171 - Alb

Senzor de Mișcare goobay 95171 - Alb

This product is an infrared motion sensor for indoor use. It reacts to heat radiation (infrared radiation) of moving objects that enter the detection area of the sensor, e. g. people and animals, etc. Entering the detection area of the sensor switches the connected electrical consumer on and after an adjustable time off again automatically. A built-in photocell prevents working of the motion sensor during sunlight. In addition, the ambient brightness can be adjusted with a regulator.\n\nEnvironment: Indoor\nFeatures: Flush mountable\nProduct Type: Motion sensor\n\nDetection Angle: 160 degrees\nDetection Mode: Passive infrared (PIR)\nDetection Range: 9 m\n\nCompliant Standards: RoHS, IP20\nNominal Voltage: AC 230 V\nPower Consumption Operational: 0.82 Watt\nWarranty: 2-year warranty\n\nDepth: 6 cm\nHeight: 8.5 cm\nWeight: 142 g\nWidth: 8.5 cm\n\nHumidity Range Operating: 0 - 93\%\nMax Operating Temperature: 40 °C\nMin Operating Temperature: -20 °C

RON 62.90
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1009.00
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1009.00
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1009.00
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1022.00
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1022.00
1

Smart power meter 380v 250a tri-fazat

Smart power meter 380v 250a tri-fazat

The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar power systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and effortless. Once the sensor is integrated, it displays the performance data via the built-in LCD screen and can also be operated effortlessly via it. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, so it can also be read out from another location. It uses the Modbus RTU communication protocol for this purpose. Another outstanding feature of the current sensor is its enormous precision. The measurement accuracy of the voltage is +/-0.5 %, for the frequency the fluctuation is 0.01 Hz, current, power and energy are measured by the sensor with a maximum deviation of +/-1 %. This ensures that the sensor is classified in accuracy class >1. The other technical data should also be noted. The sensor is housed in a 100 x 72 x 65.5 mm case and weighs 1.5 kg, calculated including cabling. This allows a space-saving accommodation of the compact element. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three folding current transformers with 5 m cable length and an RS485 cable with 10 m length. 3-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DTSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.5 kg Power system type: 3P4W (3-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 1 W Communication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range Line voltage phase-phase: 304 Vac ~ 499 Vac Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 250 A Huawei Smart Power Sensor DTSU666-H - Measurement Accuracy Voltage: ±0.5 % Current/ Power/ Energy: ±1 % Frequency: ±0.01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental Conditions Operating temperature: -25 ~ +60 Storage temperature: -40 ~ +70 Operating humidity: 5%RH ~ 95%RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - included in delivery 3x folding current transformer (5 m cable length) RS485 (10 m cable length)

RON 1022.00
1

Senzor Aqara pentru Uși și Ferestre MCCGQ11LM - Alb

Senzor Aqara pentru Uși și Ferestre MCCGQ11LM - Alb

Aqara door and window sensor detects if a window or door is closed in real time.\n\nConnectivity Technology: Wireless - ZigBee\nEnvironment: Indoor\nFeatures: Reset button, LED indicator, alarm mode\nPower Source: Battery\nProduct Type: Door and window sensor\nSupported Host Device OS: Android 5.0 (Lollipop) or later, iOS 10.3 or later\n\nCommunications Technology: Zigbee\nCommunications Type: Product-to-product\nHub Compatibility: Aqara Hub\nInternet of Things (IoT) Compatible: Yes\nPlatform: Apple HomeKit\n\nBattery Lifetime: 2 years\nForm Factor: CR1632\nRequired Qty: 1\n\nDepth: 1.1 cm\nHeight: 4.1 cm\nWidth: 2.2 cm\n\nHumidity Range Operating: 0 - 95\% (non-condensing)\nMax Operating Temperature: 50 °C\nMin Operating Temperature: -10 °C

RON 139.10
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 630.00
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 601.00
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 601.00
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 601.00
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 630.00
1

Smart power meter 176-288v - 100a - 1 faza

Smart power meter 176-288v - 100a - 1 faza

The Huawei Smart Power Sensor DDSU666-H is a single-phase current sensor for connection to the inverter. It is easy to operate and read out data via the built-in LCD screen. In addition, the component supports communication via RS485, so that the measured values can also be evaluated elsewhere. Commissioning of the current sensor for PV systems is simple and safe - the digital wizard guides you through the integration process. Once installed by one-click, the component meets the highest demands. The DDSU666-H smart power sensor is designed for use at industrial level and is particularly reliable. The technical data of the sensor is also convincing, for example, its own power consumption is less than one watt - so the device works without consuming much power itself. The possible operating temperature is specified as -25 °C to +60 °C, the relative humidity can be 5 % to 95 %. The dimensions of 100 x 36 x 65.5 mm show that this is a compact component. It is mounted on the DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the Smart Power Sensor DDSU666-H achieves a measurement accuracy of +/-1 % (current, power and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class >1. The scope of delivery includes the necessary accessories, i.e. a folding current transformer with 5 m cable length and an RS485 cable with 10 m length. 1-phase Smart Power Sensor 176-288 Volt Voltage Accuracy class > 1 Easy operation via LCD display Power consumption ≤1 W Communication via RS485 Huawei Smart Power Sensor DDSU666-H - General Data Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RH Dimension (W x D x H): 100 x 36 x 65.5 mm Mounting type: DIN35 rail Weight (including cable): 1.2 kg Power system type: 1P2W (1-phase) Input voltage: 176 VAC~288 VAC (phase / N) Power consumption: ≤ 0.8 W Communication: RS485 Huawei Smart Power Sensor DDSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DDSU666-H - Measuring range Phase voltage: 176 Vac ~ 288 Vac Current: 0 ~ 100 A

RON 630.00
1

Senzor de Mișcare goobay PIR motion sensor 95172 - Alb

Senzor de Mișcare goobay PIR motion sensor 95172 - Alb

\n\nConnectivity Technology: Wired\nEnvironment: Indoor\nFeatures: Ceiling mountable, surface mountable, compatible with incandescent light bulbs (up to 1200W), compatible with LED light bulbs (up to 300W)\nPower Source: Hardwired\nProduct Type: Motion sensor\n\nDetection Angle: 360 degrees\nDetection Mode: Passive infrared (PIR)\nDetection Range: 6 m\n\nColor: White\nCompliant Standards: WEEE, IP20\nIncluded Accessories: Mounting kit\nNominal Voltage: AC 230 V\nWarranty: 2-year warranty\n\nDepth: 11.48 cm\nHeight: 5.48 cm\nWeight: 154 g\nWidth: 11.48 cm\n\nHumidity Range Operating: 0 - 93\%\nMax Operating Temperature: 40 °C\nMin Operating Temperature: -20 °C

RON 62.90
1

Creative live! cam sync v3 2k qhd - usb webcam

Creative live! cam sync v3 2k qhd - usb webcam

SPECIFICATIONS Imaging Sensor Technology: CMOS QHD (2560 x 1440) 5 MP image sensor Video resolution and frame rates: MJPG- 1440p 30 fps/ 1080p 30 fps / 1200p 30 fps / 720p 30 fps / 540p 30 fps Output format: YUY2 / MJPG Image capture resolution: 2560 x 1440 /1920 x 1080 Image capture format: BMP / JPG FOV: Up to 95° (diagonal) Flicker control: 50 Hz / 60 Hz Microphone Dual built-in omni-directional digital MEMS microphone arrays Interface USB 2.0 Button: Touch control Plug-and-play UVC (USB video device class) compliant Cable Length: 1.8m / 5.9 ft USB-A connector Tripod mounting capable: Yes Operating Temperature 0—40°C Dimensions (L x W x H) 82 x 53 x 58 mm / 3.23 x 2.09 x 2.28 inches Weight 95.7g (3.38 oz)

RON 306.00
1