Vis alle filtre

Merke

Vis alle

Farge

Butikk

Nullstill filter

Produkter
Fra
Butikker

Grundfos magna3 32-120 f 220 1x230v pn6/10 - Pumper

Grundfos magna3 32-120 f 220 1x230v pn6/10 - Pumper

MAGNA3 32-120 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 23550.00
1

Grundfos magna3 40-120 f 250 1x230v pn6/10 - Pumper

Grundfos magna3 40-120 f 250 1x230v pn6/10 - Pumper

MAGNA3 40-120 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 29675.00
1

Grundfos mi301 - Pumper

Grundfos mi301 - Pumper

GRUNDFOS GO MI301The Grundfos GO Remote is used to establish wireless connection to a Grundfos product, using a standard Android or iOS platform, with the Grundfos GO Remote App installed. The App is available from Apple App Store and Google Play free of charge.The MI 301 is a module with built-in infrared and radio communication. It must be used in conjunction with an Android or iOS-based Smartphone with Bluetooth connection. The MI 301 module has rechargeable Li-ion battery and must be charged separately.The pump/system can be monitoried and controlled from the Grundfos GO, and it will be possible to create pdf reports. The specific functions available depend on each individual product.Supplied with the product•Grundfos MI 301•Battery charger•Quickguide.Installation:Range of ambient temperature:70 .. -20 °CRelative humidity:95 %Electrical data:Maximum current consumption:0.03 AEnclosure class (IEC 34-5):IP40

NOK 3884.00
1

Grundfos magna3 40-80 f 220 1x230v pn6/10 - Pumper

Grundfos magna3 40-80 f 220 1x230v pn6/10 - Pumper

MAGNA3 40-80 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remote

NOK 26410.00
1

Grundfos magna3 50-60 f 240 1x230v pn6/10 - Pumper

Grundfos magna3 50-60 f 240 1x230v pn6/10 - Pumper

MAGNA3 50-60 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remote

NOK 32197.00
1

Grundfos circulator alpha2 32-60 180 mm - Pumper

Grundfos circulator alpha2 32-60 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 6215.00
1

Grundfos magna3 32-60 cirkulating pump 180 mm - Pumper

Grundfos magna3 32-60 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 12027.00
1

Grundfos magna3 32-100 cirkulating pump 180 mm - Pumper

Grundfos magna3 32-100 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 13476.00
1

Grundfos magna3 32-80f cirkulating pump 220 mm - Pumper

Grundfos magna3 32-80f cirkulating pump 220 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 13604.00
1

Samsung Galaxy Z Fold5 256GB/12GB - Svart - Mobiltelefoner

Samsung Galaxy Z Fold5 256GB/12GB - Svart - Mobiltelefoner

7,6" QHD+ (2176x1812) 120 Hz Dynamic AMOLED 2X med Gorilla Glass Victus 2 og 6,2" (2316x904) 120 Hz Dynamic AMOLED-skjerm, 5G, Dual SIM, Snapdragon 8 Gen 2 Octa-core, 12 GB RAM, 256 GB Flash, Triple Camera System: 50 MPiksler f/1.8 Main Wide med OIS + 12 MPiksler f/2.2 UltraWide + 10 MPiksler f/2.4 Tele x3 med OIS (bak), dobbelt kamerasystem foran: 10 MPiksler f/2.2 + 4 MPiksler f/1.8 (foran), stereohøyttalere med Dolby Atmos fra AKG, BT 5.2, WiFi 6E, fingeravtrykksskanner på siden, IPx8, 4400 mAh batteri, 25 W hurtiglading via kabel + 15 W trådløs hurtiglading, 253 gram.

NOK 23790.00
1