20 resultater (0,15396 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Wera 887/4 RR Rapidaptor Universal Bit Holder with ring magnet - Verktoey

Wera 887/4 RR Rapidaptor Universal Bit Holder with ring magnet - Verktoey

Rapidaptor universal holder for bits with hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, free-turning magnetic sleeve securely holds even large and heavy screws. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼ hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

NOK 354.00
1

Wera 897/4 r rapidaptor bitorsion universal bit holder 1/4 inch - Bormaskin Bits

Wera 897/4 r rapidaptor bitorsion universal bit holder 1/4 inch - Bormaskin Bits

Universal holder for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. 14" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

NOK 411.00
1

Wera 800/1 BDC Bits - Verktoey

Wera 800/1 BDC Bits - Verktoey

Bits for slotted screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼” hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

NOK 92.00
1

Wera 842/1 Z Bit 5.0 x 25 mm - Bormaskin Bits

Wera 842/1 Z Bit 5.0 x 25 mm - Bormaskin Bits

Tough viscous Wera bits for hexagon socket screws and universal use. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For socket head screws Ductile and tough for hard materials Hexagon ballpoint for work in difficult installation situations 1/4" hexagon drive (Wera connecting series 1) Suitable for Bosch, Fein, Holz-Her, Lecreux, Metabo

NOK 64.00
1

Wera 842/1 Z Bit 6.0 x 25 mm - Bormaskin Bits

Wera 842/1 Z Bit 6.0 x 25 mm - Bormaskin Bits

Tough viscous Wera bits for hexagon socket screws and universal use. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For socket head screws Ductile and tough for hard materials Hexagon ballpoint for work in difficult installation situations 1/4" hexagon drive (Wera connecting series 1) Suitable for Bosch, Fein, Holz-Her, Lecreux, Metabo

NOK 69.00
1

Wera 867/1 IP TORX PLUS bits. 40 IP x 25 mm - Verktoey

Wera 867/1 IP TORX PLUS bits. 40 IP x 25 mm - Verktoey

High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

NOK 61.00
1

Wera 840/2 Z Bit Hex-Plus 8.0 x 100 mm - Bormaskin Bits

Wera 840/2 Z Bit Hex-Plus 8.0 x 100 mm - Bormaskin Bits

Tough viscous Wera bits for hexagon socket screws for universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For socket head screws Ductile and tough for hard materials Hex-Plus allows socket head screws to live longer 5/16" hexagon drive (Wera connecting series 2) Suitable for Bosch, Fein, Holz-Her, Lecreux, Metabo

NOK 172.00
1

Wera Bit-Check 10 Universal 3 - Verktoey

Wera Bit-Check 10 Universal 3 - Verktoey

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet and quick-release chuck for the take-up of bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Includes Torsion bits to combat premature wear. Tough viscous Wera bits for hexagonal head screws and universal use.

NOK 614.00
1

Wera 160 i/6 Rack Schraubendrehersatz Kraftform Plus Se - Haandverktoey

Wera 160 i/6 Rack Schraubendrehersatz Kraftform Plus Se - Haandverktoey

6-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. "Take it easy" Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage.

NOK 521.00
1

Wera Screwdriver set with voltage tester - Haandverktoey

Wera Screwdriver set with voltage tester - Haandverktoey

7-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. "Take it easy" Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including voltage tester and 1 rack for storage.

NOK 438.00
1

Wera 3160 i VDE-isolierter Schlitz-Schraubendreher Ede - Verktoey

Wera 3160 i VDE-isolierter Schlitz-Schraubendreher Ede - Verktoey

High quality Kraftform Plus VDE screwdriver out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Kraftform handle for fast and low-fatigue working. "Take it easy" Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

NOK 518.00
1

Wera Kraftform kompakt 20 with pouch 7 pieces - Haandverktoey

Wera Kraftform kompakt 20 with pouch 7 pieces - Haandverktoey

Wera compact tools enable both manual as well as power tool operations at the same time. The handle/interchangeable blade system in a compact design with various blade tips in the smallest of spaces makes the user more mobile and flexible. Suitable for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173) and Wera connecting series 1 and 4. Comes with an adaptor, bayonet and Rapidaptor technology. Kraftform handle with anti-roll feature, multi-component for particularly ergonomic screwdriving. Integrated magazine for bit storage. In this way, the set replaces a 6-piece screwdriver set and reduces the equipment required to a minimum. The telescopic bayonet blade - which can be lowered into the handle - together with the quick-release chuck allows fast manual work even in confined installation situations when the blade is retracted. The blade can be extended by simply actuating the locking sleeve. The bayonet holder can then be used as a fully-fledged screwdriver. The bayonet blade can be removed and used as a power tool adaptor, but can also be retracted once again to its original position. Includes practical belt pouch.

NOK 668.00
1