atlantic dulse benefits fra NOK 917 | Se de billigste prisene og tilbud på Cobiro CSS.com

Philips Hid-pv c 150 /s cdm 220-240v 50/60hz - Drivere spoler og transformatorer

PrimaVision Power (100 W & 150 W) for CDM - High power packed in a small sizePrimaVision Power gear is designed for optimal performance of 100 and 150 W CDM lamps - ideal where high-intensity light is key. Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • Lamp life increased by up to 30% for CDM lamps • Eliminates all visible lamp flicker Product features • Loop Through feature (in independent version) • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Applications • 100 and 150 W: high-bay area, accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

NOK 1760.00

1

Philips Hf-ri td 2 14/21/24/39 e+ - Drivere spoler og transformatorer

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) - combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly

NOK 1218.00

1

Philips Hf-regulator 136 tl-d eii 220-240v 50/60hz - Drivere spoler og transformatorer

HF-Regulator II for TL-D lamps - Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

NOK 917.00

1

Philips Hf-regulator 236 tl-d eii 220-240v 50/60hz - Drivere spoler og transformatorer

HF-Regulator II for TL-D lamps - Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

NOK 1196.00

1

Philips Bsn 70 l33-ts 230v 50hz hd1-118 - Drivere spoler og transformatorer

Long-lasting, reliable solutionEncapsulated electromagnetic copper/iron ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps Product Benefits • Excellent resistance to chemical impact, humid conditions and environmental stress crack • Long-lasting reliable solution - outstanding product lifetime of 15 years average • Minimal watt losses thanks to orthocyclic winding process • Control gear can be installed remotelyProduct Features • Encapsulated with thermoplastic polyester resin, reinforced with glass fiber • Equipped with screw terminal blocks as standard, insert contacts available upon request • Ballasts for alternative mains voltages/frequencies available upon request • Separate earth terminal (HID ‘Heavy Duty’)Applications • Outdoor lighting (most popular application: road and tunnel lighting)System • Electromagnetic system requires ballast, ignitor and capacitor • Semi-parallel circuit: if ballasts with “L" in their description (e. g. BSN 100 L307...) are used, SN(D)... ignitors are required, if ballasts with “K" in their description (e. g. BSN 100 K307...) are used, SK(D)... ignitors are required. Capacitor value to match system power can be found on lamp/ballast combination sheet • Series circuit: all ballasts are designed to work with series ignitors • No ignitor needed for SON-I lamps

NOK 1487.00

1

Philips Hf-ri td 2 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) - combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

NOK 1020.00

1

Philips Hf-ri td 1 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) - combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

NOK 1240.00

1

Merke

Farge

Butikk