32 results (0,39374 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Strip of 60 LEDs/M SMD5050 220VAC x8M 30.000H [GR-5050220VAC8M]

Strip of 60 LEDs/M SMD3528 220VAC x20M 30.000H [GR-3528220VAC20M]

Strip of 60 LEDs/M SMD5050 220VAC x6M 30.000H [GR-5050220VAC6M]

Strip of 60 LEDs/M SMD3528 220VAC x9M 30.000H [GR-3528220VAC9M]

Strip of 60 LEDs/M SMD5050 220VAC x7M 30.000H [GR-5050220VAC7M]

Strip of 60 LEDs/M SMD5050 220VAC x12M 30.000H [GR-5050220VAC12M]

Strip of 60 LEDs/M SMD3528 220VAC x16M 30.000H [GR-3528220VAC16M]

Strip of 60 LEDs/M SMD5050 220VAC x9M 30.000H [GR-5050220VAC9M]

Strip of 60 LEDs/M SMD3528 220VAC x12M 30.000H [GR-3528220VAC12M]

Strip of 60 LEDs/M SMD3528 220VAC x14M 30.000H [GR-3528220VAC14M]

Strip of 60 LEDs/M SMD5050 220VAC x13M 30.000H [GR-5050220VAC13M]

Strip of 60 LEDs/M SMD3528 220VAC x10M 30.000H [GR-3528220VAC10M]

Strip of 60 LEDs/M SMD5050 220VAC x15M 30.000H [GR-5050220VAC15M]

Strip of 60 LEDs/M SMD3528 220VAC x19M 30.000H [GR-3528220VAC19M]

Strip of 60 LEDs/M SMD5050 220VAC x11M 30.000H [GR-5050220VAC11M]

Strip of 60 LEDs/M SMD5050 220VAC x10M 30.000H [GR-5050220VAC10M]

Strip of 60 LEDs/M SMD3528 220VAC x17M 30.000H [GR-3528220VAC17M]

Strip of 60 LEDs/M SMD3528 220VAC x18M 30.000H [GR-3528220VAC18M]

Strip of 60 LEDs/M SMD3528 220VAC x11M 30.000H [GR-3528220VAC11M]

Strip of 60 LEDs/M SMD3528 220VAC x8M 30.000H [GR-3528220VAC8M]

Strip of 60 LEDs/M SMD3528 220VAC x13M 30.000H [GR-3528220VAC13M]

Strip of 60 LEDs/M SMD5050 220VAC x14M 30.000H [GR-5050220VAC14M]

Strip of 60 LEDs/M SMD3528 220VAC x15M 30.000H [GR-3528220VAC15M]

LED High Power 50W 5.000Lm Cob45 50.000H [CH-LED-50W-45MIL-B]

LED High Power 50W 5.000Lm Cob45 50.000H [CH-LED-50W-45MIL-B]

High Power LEDs are often used to replace all types of lamps and projectors. These LEDs are covered by a kind of silicone surrounded by a white plastic, supported on a metal base that acts as a predisipating plate.The metal plate has four holes at its ends in order to screw them to the wall or surface where The plus () and minus (-) signs indicate the part that corresponds to the positive and negative polarity, respectively. Due to their metal base, they must be mounted on another dissipative surface to avoid high temperatures. High Power COB LEDs have four connectors, 2 with positive and 2 negative polarity, from which it is possible to connect them by soldering them through a tin point. Utilities: Individual: direct supply of the LED from the power supply by means of a regulated source or with the use of resistors or regulators. The desired voltage must be supplied to the LED within the working values. Parallel configuration: powering a group of LEDs connecting all the anodes together and all the cathodes together, using the required voltage regulated by a single resistor in series. Series configuration: powering a group of LEDs connected sequentially. The number of LEDs to be used per series will be limited by the voltage delivered by the power supply. Polarization: the positive pole of the power supply must be connected to the anode (or at the beginning of the series), while the negative pole must be connected to the cathode (or the closing of the series).

EUR 24.42
1

Pack 4 LEDs High Power 50W 5000Lm 6000oK COB30 50.000H...

Pack 4 LEDs High Power 50W 5000Lm 6000oK COB30 50.000H...

High Power LEDs are often used to replace all types of lamps and projectors. These LEDs are covered by a kind of silicone surrounded by a white plastic, supported by a metal base that acts as a predisipating plate. The metal plate has four holes at its ends in order to screw them to the wall or to the surface where they are to be displayed.Through the plus () and minus (-) marks, the part that corresponds to the polarity is indicated positive and negative, respectively.Due to their metal base, they must be mounted on another dissipative surface to avoid high temperatures. High Power COB LEDs have four connectors, 2 with positive and 2 negative polarity, from which it is possible to connect them by soldering them through a tin point. Utilities: Individual: direct supply of the LED from the power supply by means of a regulated source or with the use of resistors or regulators. The desired voltage must be supplied to the LED within the working values. Parallel configuration: powering a group of LEDs connecting all the anodes together and all the cathodes together, using the required voltage regulated by a single resistor in series. Series configuration: powering a group of LEDs connected sequentially. The number of LEDs to be used per series will be limited by the voltage delivered by the power supply. Polarization: the positive pole of the power supply must be connected to the anode (or at the beginning of the series), while the negative pole must be connected to the cathode (or the closing of the series).

EUR 47.77
1