113 results (0,14832 seconds)

Brand

Colour

Merchant

Price (EUR)

Reset filter

Products
From
Shops

iPAD AED Trainer

iPAD Saver: NF1200 AED Trainer

Philips - M5066A HS1 AED Defibrillator, C02 Package: HS1 AED incl. battery and pads (1 set) & Slim Carry Case

Philips - M5066A HS1 AED Defibrillator, C02 Package: HS1 AED incl. battery and pads (1 set) & Slim Carry Case

Product Properties incl. battery and pads (1 set) with optional carry cases The Philips HeartStart HS1 AED assists you through the process of treating a victim of suspected sudden cardiac arrest (SCA). HS1 AED provides practical, real-time guidance through step-by-step voice commands and CPR guidance. Includes features to help guide the treatment of SCA with easy setup, clear voice commands and real-time metronome Arrives virtually ready to use – with the Ready-Pack configuration, HS1 AED is positioned inside the carry case, with Adult SMART Pads Cartridge and battery already installed and with a spare Adult SMART Pads Cartridge in place Guides you through a cardiac emergency with a simple, step-by-step process, adaptive instructions and intelligent sensors to help deliver therapy Can be used on infants and children under 25 kg (55 lb) or 0-8 years old, and adults and children over 25 kg (55 lb) or greater than 8 years old Senses when the special Infant/Child SMART Pads Cartridge is installed, and automatically adjusts CPR instructions and shock energy Can be converted to a trainer with installation of training pads cartridge Conducts a series of automatic self-tests daily, weekly and monthly, to check pad readiness and verify functionality and calibration of circuits and systems Key Features Type - 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells Capacity - Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003) Install-by Date - Battery is labelled with an install-by date of at least five years from date of manufacture Standby Life - Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) See Images for full specifications. Images for illustration only, actual item may differ.

GBP 1942.44
1

Philips - M5066A HS1 AED Defibrillator, HS1 AED incl. battery and pads (1 set)

Philips - M5066A HS1 AED Defibrillator, HS1 AED incl. battery and pads (1 set)

Product Properties incl. battery and pads (1 set) with optional carry cases The Philips HeartStart HS1 AED assists you through the process of treating a victim of suspected sudden cardiac arrest (SCA). HS1 AED provides practical, real-time guidance through step-by-step voice commands and CPR guidance. Includes features to help guide the treatment of SCA with easy setup, clear voice commands and real-time metronome Arrives virtually ready to use – with the Ready-Pack configuration, HS1 AED is positioned inside the carry case, with Adult SMART Pads Cartridge and battery already installed and with a spare Adult SMART Pads Cartridge in place Guides you through a cardiac emergency with a simple, step-by-step process, adaptive instructions and intelligent sensors to help deliver therapy Can be used on infants and children under 25 kg (55 lb) or 0-8 years old, and adults and children over 25 kg (55 lb) or greater than 8 years old Senses when the special Infant/Child SMART Pads Cartridge is installed, and automatically adjusts CPR instructions and shock energy Can be converted to a trainer with installation of training pads cartridge Conducts a series of automatic self-tests daily, weekly and monthly, to check pad readiness and verify functionality and calibration of circuits and systems Key Features Type - 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells Capacity - Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003) Install-by Date - Battery is labelled with an install-by date of at least five years from date of manufacture Standby Life - Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) See Images for full specifications. Images for illustration only, actual item may differ.

GBP 1886.71
1

Philips - M5066A HS1 AED Defibrillator, C01 Package: HS1 AED incl. battery and pads (1 set) & Standard Carry Case

Philips - M5066A HS1 AED Defibrillator, C01 Package: HS1 AED incl. battery and pads (1 set) & Standard Carry Case

Product Properties incl. battery and pads (1 set) with optional carry cases The Philips HeartStart HS1 AED assists you through the process of treating a victim of suspected sudden cardiac arrest (SCA). HS1 AED provides practical, real-time guidance through step-by-step voice commands and CPR guidance. Includes features to help guide the treatment of SCA with easy setup, clear voice commands and real-time metronome Arrives virtually ready to use – with the Ready-Pack configuration, HS1 AED is positioned inside the carry case, with Adult SMART Pads Cartridge and battery already installed and with a spare Adult SMART Pads Cartridge in place Guides you through a cardiac emergency with a simple, step-by-step process, adaptive instructions and intelligent sensors to help deliver therapy Can be used on infants and children under 25 kg (55 lb) or 0-8 years old, and adults and children over 25 kg (55 lb) or greater than 8 years old Senses when the special Infant/Child SMART Pads Cartridge is installed, and automatically adjusts CPR instructions and shock energy Can be converted to a trainer with installation of training pads cartridge Conducts a series of automatic self-tests daily, weekly and monthly, to check pad readiness and verify functionality and calibration of circuits and systems Key Features Type - 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells Capacity - Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003) Install-by Date - Battery is labelled with an install-by date of at least five years from date of manufacture Standby Life - Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) See Images for full specifications. Images for illustration only, actual item may differ.

GBP 2041.94
1

Seca S10 (Stethoscope with a standard membrane side and a bell side as well as a single-channel tube).

Defibtech AED Defibrillator

Defibtech AED Defibrillator

• CPR feedback to guide the rescuer through the correct CPR process • High IP55 resistance against dust and water contamination • 5+2 year manufacturer warranty • Long 5 year lifespan for both the electrodes and battery • Built-in metronome guidance for the correct speed of chest compression's • Self-Test function ensures the defibrillator is always rescue ready • LCD screen also displays information • Also available as a fully automatic AED The Zoll AED Plus is a semi-automatic defibrillator that not only administers a shock when needed, but also guides you step-by-step through the CPR process. The electrodes have the added benefit of a built in sensor that will monitor your CPR technique and verbally guide you through the whole process; a metronome will enable you to administer chest compression's at the correct speed and clear voice prompts will alert you if your compression's are not deep enough, but also provide positive feedback when you are administering the correct CPR technique - much needed during what is often a stressful event. As well as voice prompts the Zoll Plus AED has clear visual pictographs on its inner casing, with LED lights that will guide you through each stage of the resuscitation process and if that isn't enough, there is also a LCD screen, allowing you to also read the instructions. These features of the Zoll Plus AED make this an excellent choice for novice or non-professional users. The excellent features of the Zoll AED Plus defibrillator don't stop there! As well as being housed in a strong and sturdy outer casing, this AED is also highly resistant against contamination from water and dirt. The electrodes and batteries both have a generous 5 year lifespan, meaning you only have to monitor one expiry date and with a 7 year manufacturers warranty (5 years automatically and an extra 2 if you register your AED with Zoll), you will only need to change the batteries and electrodes once in its lifetime if the AED has not been deployed, all of this makes the Zoll Plus AED a low-maintenance defibrillator. Unlike the fully automatic model, the semi-automatic model has the addition of a shock button. The defibrillator will monitor the patients heart rhythm and prompt the user to press the shock button if it detects that a shock is necessary. • Warranty: 7 Year • Size: 13,3 x 24,1 x 29,2 (CM) • Quality Assurance: CE, FDA • Options: Child CPR, Delivery with carrier case, ECG Display, Trainer Available • CPR Feedback: Audio (Standard), Metronome, Feedback, Text on a display • Technical Specifications: Adapted child CPR protocol • Weight: 3.1 (KG) • Semi Automatic • Case included: Yes • Water & Dirt resistance: High • IP Rate: IP55 • Battery Standby Life: 5 years • Electrode Pad Life: 5 years • Instruction Screen: Yes 5 + 2 Year Manufacturer warranty

GBP 1980.00
1

Zoll AED Plus Semi-Automatic Defibrillator

Zoll AED Plus Semi-Automatic Defibrillator

Product Properties Please note this item may be impacted by supply delays • CPR feedback to guide the rescuer through the correct CPR process • High IP55 resistance against dust and water contamination • 5+2 year manufacturer warranty • Long 5 year lifespan for both the electrodes and battery • Built-in metronome guidance for the correct speed of chest compression's • Self-Test function ensures the defibrillator is always rescue ready • LCD screen also displays information • Also available as a fully automatic AED The Zoll AED Plus is a semi-automatic defibrillator that not only administers a shock when needed, but also guides you step-by-step through the CPR process. The electrodes have the added benefit of a built in sensor that will monitor your CPR technique and verbally guide you through the whole process; a metronome will enable you to administer chest compression's at the correct speed and clear voice prompts will alert you if your compression's are not deep enough, but also provide positive feedback when you are administering the correct CPR technique - much needed during what is often a stressful event. As well as voice prompts the Zoll Plus AED has clear visual pictographs on its inner casing, with LED lights that will guide you through each stage of the resuscitation process and if that isn't enough, there is also a LCD screen, allowing you to also read the instructions. These features of the Zoll Plus AED make this an excellent choice for novice or non-professional users. The excellent features of the Zoll AED Plus defibrillator don't stop there! As well as being housed in a strong and sturdy outer casing, this AED is also highly resistant against contamination from water and dirt. The electrodes and batteries both have a generous 5 year lifespan, meaning you only have to monitor one expiry date and with a 7 year manufacturers warranty (5 years automatically and an extra 2 if you register your AED with Zoll), you will only need to change the batteries and electrodes once in its lifetime if the AED has not been deployed, all of this makes the Zoll Plus AED a low-maintenance defibrillator. Unlike the fully automatic model, the semi-automatic model has the addition of a shock button. The defibrillator will monitor the patients heart rhythm and prompt the user to press the shock button if it detects that a shock is necessary. • Warranty: 7 Year • Size: 13,3 x 24,1 x 29,2 (CM) • Quality Assurance: CE, FDA • Options: Child CPR, Delivery with carrier case, ECG Display, Trainer Available • CPR Feedback: Audio (Standard), Metronome, Feedback, Text on a display • Technical Specifications: Adapted child CPR protocol • Weight: 3.1 (KG) • Semi Automatic • Case included: Yes • Water & Dirt resistance: High • IP Rate: IP55 • Battery Standby Life: 5 years • Electrode Pad Life: 5 years • Instruction Screen: Yes 5 + 2 Year Manufacturer warranty

GBP 1440.00
1

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Rail

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Rail

Product Properties Optica WDS Flexible Woods Light Magnifier with Optimal Colour for d Large Magnification The large magnifier diameter of 157mm combined with 1.9x (3.5dpt) magnification allows the user to focus on fine details through a large scale view.  Optimal Colour Rendering Properties 6,500°K LEDs ensure less shadow formation and optimal colour rendering. Optional Woods Light  Optica comes with a medical device approved magnifier as standard, and there is an optional UV Woods light. The Woods light is ideal for dermatology and veterinary use. Precise Colour Display The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning Reinforced friction joints and an aluminium spring balanced arm allows a broad reach of up to 142cm without the lamp head drifting. This allows smooth handling for users to examine typically harder to reach places with ease. Optica Lens Cover Durable lens cover protects the magnifier lens from any dust or potential scratches. Magnifiers can be a potential fi re risk if left in direct sunlight, the Optica lens cover aims to reduce this risk. Key Features General System Information OPTICAMDVT1C OPTICAMDVD OPTICAMDVM OPTICAMDVW Lamphead/Arm Type OpticaMDVT1 Mount Type Ceiling Mount Desk Mount Mobile Mount Wall Mount System Weight (kg 8.2 2.5 10.1 2.2 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification I Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Permanent Electrical Connection Required Power Lead supplied loose with UK plug

GBP 1210.80
1

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Wall

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Wall

Product Properties Optica WDS Flexible Woods Light Magnifier with Optimal Colour for d Large Magnification The large magnifier diameter of 157mm combined with 1.9x (3.5dpt) magnification allows the user to focus on fine details through a large scale view.  Optimal Colour Rendering Properties 6,500°K LEDs ensure less shadow formation and optimal colour rendering. Optional Woods Light  Optica comes with a medical device approved magnifier as standard, and there is an optional UV Woods light. The Woods light is ideal for dermatology and veterinary use. Precise Colour Display The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning Reinforced friction joints and an aluminium spring balanced arm allows a broad reach of up to 142cm without the lamp head drifting. This allows smooth handling for users to examine typically harder to reach places with ease. Optica Lens Cover Durable lens cover protects the magnifier lens from any dust or potential scratches. Magnifiers can be a potential fi re risk if left in direct sunlight, the Optica lens cover aims to reduce this risk. Key Features General System Information OPTICAMDVT1C OPTICAMDVD OPTICAMDVM OPTICAMDVW Lamphead/Arm Type OpticaMDVT1 Mount Type Ceiling Mount Desk Mount Mobile Mount Wall Mount System Weight (kg 8.2 2.5 10.1 2.2 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification I Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Permanent Electrical Connection Required Power Lead supplied loose with UK plug

GBP 1167.60
1

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Desk

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Desk

Product Properties Optica WDS Flexible Woods Light Magnifier with Optimal Colour for d Large Magnification The large magnifier diameter of 157mm combined with 1.9x (3.5dpt) magnification allows the user to focus on fine details through a large scale view.  Optimal Colour Rendering Properties 6,500°K LEDs ensure less shadow formation and optimal colour rendering. Optional Woods Light  Optica comes with a medical device approved magnifier as standard, and there is an optional UV Woods light. The Woods light is ideal for dermatology and veterinary use. Precise Colour Display The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning Reinforced friction joints and an aluminium spring balanced arm allows a broad reach of up to 142cm without the lamp head drifting. This allows smooth handling for users to examine typically harder to reach places with ease. Optica Lens Cover Durable lens cover protects the magnifier lens from any dust or potential scratches. Magnifiers can be a potential fi re risk if left in direct sunlight, the Optica lens cover aims to reduce this risk. Key Features General System Information OPTICAMDVT1C OPTICAMDVD OPTICAMDVM OPTICAMDVW Lamphead/Arm Type OpticaMDVT1 Mount Type Ceiling Mount Desk Mount Mobile Mount Wall Mount System Weight (kg 8.2 2.5 10.1 2.2 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification I Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Permanent Electrical Connection Required Power Lead supplied loose with UK plug

GBP 1177.20
1

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Mobile

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Mobile

Product Properties Optica WDS Flexible Woods Light Magnifier with Optimal Colour for d Large Magnification The large magnifier diameter of 157mm combined with 1.9x (3.5dpt) magnification allows the user to focus on fine details through a large scale view.  Optimal Colour Rendering Properties 6,500°K LEDs ensure less shadow formation and optimal colour rendering. Optional Woods Light  Optica comes with a medical device approved magnifier as standard, and there is an optional UV Woods light. The Woods light is ideal for dermatology and veterinary use. Precise Colour Display The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning Reinforced friction joints and an aluminium spring balanced arm allows a broad reach of up to 142cm without the lamp head drifting. This allows smooth handling for users to examine typically harder to reach places with ease. Optica Lens Cover Durable lens cover protects the magnifier lens from any dust or potential scratches. Magnifiers can be a potential fi re risk if left in direct sunlight, the Optica lens cover aims to reduce this risk. Key Features General System Information OPTICAMDVT1C OPTICAMDVD OPTICAMDVM OPTICAMDVW Lamphead/Arm Type OpticaMDVT1 Mount Type Ceiling Mount Desk Mount Mobile Mount Wall Mount System Weight (kg 8.2 2.5 10.1 2.2 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification I Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Permanent Electrical Connection Required Power Lead supplied loose with UK plug

GBP 1292.40
1

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Ceiling

Brandon Medical - Optica LED Woods medical magnifier, dimmable with 160mm 3.5 diopter lens - multiple mount options, Ceiling

Product Properties Optica WDS Flexible Woods Light Magnifier with Optimal Colour for d Large Magnification The large magnifier diameter of 157mm combined with 1.9x (3.5dpt) magnification allows the user to focus on fine details through a large scale view.  Optimal Colour Rendering Properties 6,500°K LEDs ensure less shadow formation and optimal colour rendering. Optional Woods Light  Optica comes with a medical device approved magnifier as standard, and there is an optional UV Woods light. The Woods light is ideal for dermatology and veterinary use. Precise Colour Display The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning Reinforced friction joints and an aluminium spring balanced arm allows a broad reach of up to 142cm without the lamp head drifting. This allows smooth handling for users to examine typically harder to reach places with ease. Optica Lens Cover Durable lens cover protects the magnifier lens from any dust or potential scratches. Magnifiers can be a potential fi re risk if left in direct sunlight, the Optica lens cover aims to reduce this risk. Key Features General System Information OPTICAMDVT1C OPTICAMDVD OPTICAMDVM OPTICAMDVW Lamphead/Arm Type OpticaMDVT1 Mount Type Ceiling Mount Desk Mount Mobile Mount Wall Mount System Weight (kg 8.2 2.5 10.1 2.2 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification I Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Permanent Electrical Connection Required Power Lead supplied loose with UK plug

GBP 1863.60
1

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Back plate

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Back plate

Product Properties Coolview CLED50 examination lights are the perfect light source for a wide range of procedures. Providing a high intensity, bright natural light, Coolview CLED50SX is perfect for medical consultation in primary care and medical clinics. Powerful Light Intensity Coolview CLED50SX emits 50,000 Lux of bright natural light at 0.5 m providing an intense, clear light source for use in general consultation areas.  Perfect Colour The colour corrected light source with a colour temperature of 4,400 °K allows for accurate representation of tissue during examination. Coolview CLED50SX has a high Ra of ≥93 which describes the exceptionally high quality of white light whilst the high measurement of R9 of ≥90 describes how accurately it illuminates tissues. Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning The Coolview CLED50SX Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED50SXBP CLED50SXDP CLED50SXMP CLED50SXRP CLED50SXWP Lamphead/Arm Type CLED50SX Mount Type Backplate Wall Mount Desk Mount Mobile Base Rail Mount Wall Mount Weight (kg 1.8 1.7 9.3 1.5 1.4 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 687.60
1

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Rail

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Rail

Product Properties Coolview CLED50 examination lights are the perfect light source for a wide range of procedures. Providing a high intensity, bright natural light, Coolview CLED50SX is perfect for medical consultation in primary care and medical clinics. Powerful Light Intensity Coolview CLED50SX emits 50,000 Lux of bright natural light at 0.5 m providing an intense, clear light source for use in general consultation areas.  Perfect Colour The colour corrected light source with a colour temperature of 4,400 °K allows for accurate representation of tissue during examination. Coolview CLED50SX has a high Ra of ≥93 which describes the exceptionally high quality of white light whilst the high measurement of R9 of ≥90 describes how accurately it illuminates tissues. Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning The Coolview CLED50SX Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED50SXBP CLED50SXDP CLED50SXMP CLED50SXRP CLED50SXWP Lamphead/Arm Type CLED50SX Mount Type Backplate Wall Mount Desk Mount Mobile Base Rail Mount Wall Mount Weight (kg 1.8 1.7 9.3 1.5 1.4 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 712.80
1

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Desk

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Desk

Product Properties Coolview® CLED30™ Coolview CLED30 is a powerful examination light with light intensity of 30,000 Lux, designed to be multi-purpose. Brandon Medical has designed Coolview CLED30 as an affordable, professional-looking, and powerful examination light for your practice. Coolview® CLED30™ SH Coolview CLED30SH arm is attached at the rear of the luminaire and is recommended for gynaecology, cervical screening and general examination. Comfortable, Cool Light with Excellent Rendering An ideal light for general examination within GP consulting rooms and examination rooms. With a bright white LED light, it renders skin tones realistically, which is critical for correct diagnosis. Modern Concept, Ergonomic Design The modern design of CLED30 examination light will inspire confidence in your patients whilst the ergonomics of the head combined with the flexible, stable arm will allow you to handle and position the light effortlessly, which will suit daily use by clinical staff Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED30SH Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, G-Clamp (Table), “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED30SHB CLED30SHD CLED30SHG CLED30SHM CLED30SHR CLED30SHW Lamphead/Arm Type CLED30SH Mount Type Backplate Wall Mount Desk Mount Table (G-Clamp) Mobile Base Rail Mount Wall Mount System Weight (kg 2.1 2 1.95 9.6 1.8 1.7 Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Conformity CE (EU MDR 2017/745) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 524.40
1

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Table (G-Clamp)

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Table (G-Clamp)

Product Properties Coolview® CLED30™ Coolview CLED30 is a powerful examination light with light intensity of 30,000 Lux, designed to be multi-purpose. Brandon Medical has designed Coolview CLED30 as an affordable, professional-looking, and powerful examination light for your practice. Coolview® CLED30™ SH Coolview CLED30SH arm is attached at the rear of the luminaire and is recommended for gynaecology, cervical screening and general examination. Comfortable, Cool Light with Excellent Rendering An ideal light for general examination within GP consulting rooms and examination rooms. With a bright white LED light, it renders skin tones realistically, which is critical for correct diagnosis. Modern Concept, Ergonomic Design The modern design of CLED30 examination light will inspire confidence in your patients whilst the ergonomics of the head combined with the flexible, stable arm will allow you to handle and position the light effortlessly, which will suit daily use by clinical staff Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED30SH Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, G-Clamp (Table), “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED30SHB CLED30SHD CLED30SHG CLED30SHM CLED30SHR CLED30SHW Lamphead/Arm Type CLED30SH Mount Type Backplate Wall Mount Desk Mount Table (G-Clamp) Mobile Base Rail Mount Wall Mount System Weight (kg 2.1 2 1.95 9.6 1.8 1.7 Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Conformity CE (EU MDR 2017/745) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 490.80
1

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Rail

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Rail

Product Properties Coolview® CLED30™ Coolview CLED30 is a powerful examination light with light intensity of 30,000 Lux, designed to be multi-purpose. Brandon Medical has designed Coolview CLED30 as an affordable, professional-looking, and powerful examination light for your practice. Coolview® CLED30™ SH Coolview CLED30SH arm is attached at the rear of the luminaire and is recommended for gynaecology, cervical screening and general examination. Comfortable, Cool Light with Excellent Rendering An ideal light for general examination within GP consulting rooms and examination rooms. With a bright white LED light, it renders skin tones realistically, which is critical for correct diagnosis. Modern Concept, Ergonomic Design The modern design of CLED30 examination light will inspire confidence in your patients whilst the ergonomics of the head combined with the flexible, stable arm will allow you to handle and position the light effortlessly, which will suit daily use by clinical staff Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED30SH Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, G-Clamp (Table), “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED30SHB CLED30SHD CLED30SHG CLED30SHM CLED30SHR CLED30SHW Lamphead/Arm Type CLED30SH Mount Type Backplate Wall Mount Desk Mount Table (G-Clamp) Mobile Base Rail Mount Wall Mount System Weight (kg 2.1 2 1.95 9.6 1.8 1.7 Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Conformity CE (EU MDR 2017/745) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 544.80
1

Brandon Medical - Coolview CLED53 LED Examination Light FX Arm with LED technology - multiple mount options, Wall

Brandon Medical - Coolview CLED53 LED Examination Light FX Arm with LED technology - multiple mount options, Wall

Product Properties LED Examination Lights from Brandon Medical are the perfect light source for a wide range of procedures. Providing a high intensity, bright natural looking light, Coolview CLED53 is perfect for medical consultations and examinations in primary care and medical clinics. Powerful, variable Light Intensity Coolview CLED53 emits a powerful 50,000 Lux of light at 0.5 metres, providing an intense, clear light source for excellent visualization. The easily accessible and intuitive controls offer 5 levels of brightness Perfect Colour The powerful light source is matched with a selectable colour temperature feature, which can be adjusted between 3,300, 3,800 and 4,400ºKelvin. This provides the Clinician with accurate representation and visualization of the site under examination. Coolview CLED53 offers a high CRI Ra of ≥93 which describes the exceptionally high quality of white Light and excellent overall colour rendition, whilst the high CRI R9 value of ≥90 can help to enhance visualization of areas where red is more predominant. Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED53 Examination Light operates on a spring balanced rigid arm offering optimum reach, positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, “Medirail” or on a Mobile Wheeled Base Key Features General System Information CLED35FXBP CLED35FXDP CLED35FXMP CLED53FXRP CLED53FXWP CLED53FXC Lamphead/Arm Type CLED50SX Mount Type Backplate Wall Mount Desk Mount Mobile Base Rail Mount Wall Mount Ceiling LR Stem System Weight (kg 1.8 1.7 9.3 1.5 1.4 4.9 Additional Information Power Lead supplied loose with UK plug Direct Supply to Stem & In-line C7 Connector Medical Device Classification I I Electrical Classification II I Type of luminaire Examination (Luminaire for diagnosis) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Conformity CE (EU MDR 2017/745)

GBP 938.40
1

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Back plate

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Back plate

Product Properties Coolview® CLED30™ Coolview CLED30 is a powerful examination light with light intensity of 30,000 Lux, designed to be multi-purpose. Brandon Medical has designed Coolview CLED30 as an affordable, professional-looking, and powerful examination light for your practice. Coolview® CLED30™ SH Coolview CLED30SH arm is attached at the rear of the luminaire and is recommended for gynaecology, cervical screening and general examination. Comfortable, Cool Light with Excellent Rendering An ideal light for general examination within GP consulting rooms and examination rooms. With a bright white LED light, it renders skin tones realistically, which is critical for correct diagnosis. Modern Concept, Ergonomic Design The modern design of CLED30 examination light will inspire confidence in your patients whilst the ergonomics of the head combined with the flexible, stable arm will allow you to handle and position the light effortlessly, which will suit daily use by clinical staff Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED30SH Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, G-Clamp (Table), “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED30SHB CLED30SHD CLED30SHG CLED30SHM CLED30SHR CLED30SHW Lamphead/Arm Type CLED30SH Mount Type Backplate Wall Mount Desk Mount Table (G-Clamp) Mobile Base Rail Mount Wall Mount System Weight (kg 2.1 2 1.95 9.6 1.8 1.7 Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Conformity CE (EU MDR 2017/745) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 534.00
1

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Mobile

Brandon Medical - Coolview CLED30 Horizontal LED Examination Light, with LED technology - multiple mount options, Mobile

Product Properties Coolview® CLED30™ Coolview CLED30 is a powerful examination light with light intensity of 30,000 Lux, designed to be multi-purpose. Brandon Medical has designed Coolview CLED30 as an affordable, professional-looking, and powerful examination light for your practice. Coolview® CLED30™ SH Coolview CLED30SH arm is attached at the rear of the luminaire and is recommended for gynaecology, cervical screening and general examination. Comfortable, Cool Light with Excellent Rendering An ideal light for general examination within GP consulting rooms and examination rooms. With a bright white LED light, it renders skin tones realistically, which is critical for correct diagnosis. Modern Concept, Ergonomic Design The modern design of CLED30 examination light will inspire confidence in your patients whilst the ergonomics of the head combined with the flexible, stable arm will allow you to handle and position the light effortlessly, which will suit daily use by clinical staff Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED30SH Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, G-Clamp (Table), “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED30SHB CLED30SHD CLED30SHG CLED30SHM CLED30SHR CLED30SHW Lamphead/Arm Type CLED30SH Mount Type Backplate Wall Mount Desk Mount Table (G-Clamp) Mobile Base Rail Mount Wall Mount System Weight (kg 2.1 2 1.95 9.6 1.8 1.7 Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Conformity CE (EU MDR 2017/745) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 640.80
1

Brandon Medical - Coolview CLED53 LED Examination Light FX Arm with LED technology - multiple mount options, Mobile

Brandon Medical - Coolview CLED53 LED Examination Light FX Arm with LED technology - multiple mount options, Mobile

Product Properties LED Examination Lights from Brandon Medical are the perfect light source for a wide range of procedures. Providing a high intensity, bright natural looking light, Coolview CLED53 is perfect for medical consultations and examinations in primary care and medical clinics. Powerful, variable Light Intensity Coolview CLED53 emits a powerful 50,000 Lux of light at 0.5 metres, providing an intense, clear light source for excellent visualization. The easily accessible and intuitive controls offer 5 levels of brightness Perfect Colour The powerful light source is matched with a selectable colour temperature feature, which can be adjusted between 3,300, 3,800 and 4,400ºKelvin. This provides the Clinician with accurate representation and visualization of the site under examination. Coolview CLED53 offers a high CRI Ra of ≥93 which describes the exceptionally high quality of white Light and excellent overall colour rendition, whilst the high CRI R9 value of ≥90 can help to enhance visualization of areas where red is more predominant. Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The Coolview CLED53 Examination Light operates on a spring balanced rigid arm offering optimum reach, positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, “Medirail” or on a Mobile Wheeled Base Key Features General System Information CLED35FXBP CLED35FXDP CLED35FXMP CLED53FXRP CLED53FXWP CLED53FXC Lamphead/Arm Type CLED50SX Mount Type Backplate Wall Mount Desk Mount Mobile Base Rail Mount Wall Mount Ceiling LR Stem System Weight (kg 1.8 1.7 9.3 1.5 1.4 4.9 Additional Information Power Lead supplied loose with UK plug Direct Supply to Stem & In-line C7 Connector Medical Device Classification I I Electrical Classification II I Type of luminaire Examination (Luminaire for diagnosis) Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Conformity CE (EU MDR 2017/745)

GBP 1024.80
1

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Desk

Brandon Medical - Coolview CLED50 LED Examination Light SX Arm with LED technology - multiple mount options, Desk

Product Properties Coolview CLED50 examination lights are the perfect light source for a wide range of procedures. Providing a high intensity, bright natural light, Coolview CLED50SX is perfect for medical consultation in primary care and medical clinics. Powerful Light Intensity Coolview CLED50SX emits 50,000 Lux of bright natural light at 0.5 m providing an intense, clear light source for use in general consultation areas.  Perfect Colour The colour corrected light source with a colour temperature of 4,400 °K allows for accurate representation of tissue during examination. Coolview CLED50SX has a high Ra of ≥93 which describes the exceptionally high quality of white light whilst the high measurement of R9 of ≥90 describes how accurately it illuminates tissues. Infection Control  The fully enclosed light head is sealed to protect from dust and light liquid ingress. Mountings The exceptional Ra of >93 accurately displays the high quality of white light and the R9 value >90 describes how accurately the user can differentiate between red tissues.  CRI  Ra >93 R9 >90   R13 >95 Flexible Positioning The Coolview CLED50SX Examination Light operates on a flexible arm offering precise positioning and stability. The Light can be specified for mounting on the Wall (with or without Backplate), Desk, “Medirail” or on a Mobile Wheeled Base. Key Features General System Information CLED50SXBP CLED50SXDP CLED50SXMP CLED50SXRP CLED50SXWP Lamphead/Arm Type CLED50SX Mount Type Backplate Wall Mount Desk Mount Mobile Base Rail Mount Wall Mount Weight (kg 1.8 1.7 9.3 1.5 1.4 Conformity CE (EU MDR 2017/745) Type of luminaire Examination (Luminaire for diagnosis) Medical Device Classification I Electrical Classification II Electrical conformity EN/IEC 60601-1; EN/IEC 60601-2-41; EN/IEC 60601-1-2 Additional Information Power Lead supplied loose with UK plug

GBP 726.00
1