6 results (0,15639 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

2.55MM HSS S/S Intermediate Machine Reamer

2.55MM HSS S/S Intermediate Machine Reamer

Available in diameters in increments of 0.01mm. Flute lengths and overall dimensions generally in line with British Standards. Shank diameter cutting diameter - 0.025mm. On the cutting diameter of standard reamers the diameter across the circular lands immediately behind the bevel or taper lead. The tolerance is in accordance with DIN 1420 and is intended to produce H7 holes. Tolerance (to H7) up to 3mm 0.006mm - 0.0000mm 3 to 6mm 0.0012mm - 0.0000mm 6 to 10mm 0.0015mm - 0.0000mm 10 to 12mm 0.0018mm - 0.0000mm

GBP 0.00
1

3.11MM HSS S/S Intermediate Machine Reamer

3.11MM HSS S/S Intermediate Machine Reamer

Available in diameters in increments of 0.01mm. Flute lengths and overall dimensions generally in line with British Standards. Shank diameter cutting diameter - 0.025mm. On the cutting diameter of standard reamers the diameter across the circular lands immediately behind the bevel or taper lead. The tolerance is in accordance with DIN 1420 and is intended to produce H7 holes. Tolerance (to H7) up to 3mm 0.006mm - 0.0000mm 3 to 6mm 0.0012mm - 0.0000mm 6 to 10mm 0.0015mm - 0.0000mm 10 to 12mm 0.0018mm - 0.0000mm

GBP 0.00
1

8.27MM HSS S/S Intermediate Machine Reamer

8.27MM HSS S/S Intermediate Machine Reamer

Available in diameters in increments of 0.01mm. Flute lengths and overall dimensions generally in line with British Standards. Shank diameter cutting diameter - 0.025mm. On the cutting diameter of standard reamers the diameter across the circular lands immediately behind the bevel or taper lead. The tolerance is in accordance with DIN 1420 and is intended to produce H7 holes. Tolerance (to H7) up to 3mm 0.006mm - 0.0000mm 3 to 6mm 0.0012mm - 0.0000mm 6 to 10mm 0.0015mm - 0.0000mm 10 to 12mm 0.0018mm - 0.0000mm

GBP 0.00
1

2.05mm HSS S/S Intermediate M/Creamer

2.05mm HSS S/S Intermediate M/Creamer

Available in diameters in increments of 0.01mm. Flute lengths and overall dimensions generally in line with British Standards. Shank diameter cutting diameter - 0.025mm. On the cutting diameter of standard reamers the diameter across the circular lands immediately behind the bevel or taper lead. The tolerance is in accordance with DIN 1420 and is intended to produce H7 holes. Tolerance (to H7) up to 3mm 0.006mm - 0.0000mm 3 to 6mm 0.0012mm - 0.0000mm 6 to 10mm 0.0015mm - 0.0000mm 10 to 12mm 0.0018mm - 0.0000mm

GBP 0.00
1