pooky artemis circular chandelier from GBP 0 | See the cheapest prices and offers on Cobiro CSS.com

Zehnder Caladair Silvertop 52 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 52 First Eco Commercial MVHR Unit Product Part Number Caladair SILVERTOP 52 First Eco - CAL11 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 52 2185

GBP 15010.69

1

Zehnder Caladair Carma 9048 First Eco

Zehnder Caladair Carma 9048 First Eco Product part Number Caladair CARMA 9048 W First Eco - CAL17 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 16047.10

1

Special Offer Zehnder Caladair Carma 9008Y Premium BE025 Eco

Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors The unit has 2 x low energy, high efficiency backward curved EC motors with heat and speed protection

GBP 4800.00

1

Zehnder Caladair Freetime First Eco 3500

Zehnder Caladair Freetime First Eco 3500 Product Part Number Caladair FREETIME 3500 First Eco - CAL24 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 10163.09

1

Zehnder Caladair Neotime 900 First Eco MVHR Units

Zehnder Caladair Neotime 900 First Eco MVHR Units Product part Number Caladair NEOTIME 900 First Eco - CAL02 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 5728.94

1

Zehnder Caladair Neotime 1300 First Eco MVHR Units

Zehnder Caladair Neotime 1300 First EcoMVHR Units Product Part Number Caladair NEOTIME 1300 First Eco - CAL03 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 7563.25

1

Zehnder Caladair Silvertop 23 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 23 First Eco Commercial MVHR Unit Product Part Number Caladair SILVERTOP 23 First Eco - CAL09 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 23 1735 1065 1340 Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation. Guarantee 2-year parts

GBP 9491.10

1

Zehnder Caladair Neotime 600 First Eco MVHR unit

Zehnder Caladair Neotime 600 First Eco MVHR Units Product Part Number Caladair NEOTIME 600 First Eco - CAL01 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 4630.70

1

Zehnder Caladair Silvertop 06 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 06 First Eco Commercial MVHR Unit Product part Number Caladair SILVERTOP 06 First Eco - CAL06 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 06 1105 570 1040 Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation. Guarantee 2-year parts

GBP 4822.78

1

Zehnder Caladair Silvertop 15 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 15 First Eco Commercial MVHR Unit Product Part Number Caladair SILVERTOP 15 First Eco - CAL08 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 15 1590 750 1200 Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation. Guarantee 2-year parts

GBP 7184.80

1

Zehnder Caladair Freetime First Eco 800

Zehnder Caladair Freetime First Eco 800 Product Part Number Caladair FREETIME 800 First Eco - CDF024149 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 5205.10

1

Zehnder Caladair Carma 9023 First Eco

Zehnder Caladair Carma 9023 First Eco Product Part Number Caladair CARMA 9023 L First Eco - CAL15 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can

GBP 11451.71

1

Zehnder Caladair Carma 9016 First Eco

Zehnder Caladair Carma 9016 First Eco Product Part Number Caladair CARMA 9016 L First Eco - CDF026370 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can

GBP 9669.13

1

Zehnder Caladair Neotime 2500 First Eco MVHR Unit

Zehnder Caladair Neotime 2500 First Eco MVHR Unit Product Part Number Caladair NEOTIME 2500 First Eco - CAL05 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 9734.34

1

Zehnder Caladair Neotime 1800 First Eco MVHR Units

Zehnder Caladair Neotime 1800 First Eco MVHR Units Product Part Number Caladair NEOTIME 1800 First Eco - CAL04 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 8485.09

1

Zehnder Caladair Carma 9008 First Eco

Zehnder Caladair Carma 9008 First Eco Product Part Number Caladair CARMA 9008 L First Eco - CAL12 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7225.98

1

Zehnder Caladair Silvertop 08 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 08 First Eco Commercial MVHR Unit Product Part Number Caladair SILVERTOP 08 First Eco - CAL07 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 08 1265 700 1150 Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation. Guarantee 2-year parts

GBP 5976.73

1

Zehnder Caladair Silvertop 35 First Eco Commercial MVHR Unit

Zehnder Caladair Silvertop 35 First Eco Commercial MVHR Unit Product Part Number Caladair SILVERTOP 35 First Eco - CAL10 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Energy Exchanger Highly efficient counter flow plate energy exchanger constructed of aluminium designed for a lifetime use and provides 90% or more heat recovery Motors This unit has 2 x low energy consumption, highly efficient backward curved EC motors with heat and speed protection Installation Indoor installation Compact design and small footprint, top connections via double lips circular connectors (except size 52) for an easy, quick, airtight and cost-efficient installation (no adapters). Insulation of Ductwork We recommend you use Metal Spiral ducting and fittings due to superior strength. Dimensions Model Length (mm) Width (mm) Height (mm) Silvertop 52 1950 1210 1495 Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation. Guarantee 2-year parts

GBP 12481.99

1

Zehnder Caladair Freetime First Eco 2000

Zehnder Caladair Freetime First Eco 2000 Product Part Number Caladair FREETIME 2000 First Eco - CDF024151 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat

GBP 8155.37

1

Zehnder Caladair Carma 9010 First Eco

Zehnder Caladair Carma 9010 First Eco Product Part Number Caladair CARMA 9010 L First Eco - CAL13 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 8181.46

1

Zehnder Caladair Freetime First Eco 1500

Zehnder Caladair Freetime First Eco 1500 Product Part Number Caladair FREETIME 1500 First Eco - CDF024150 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7195.09

1

Zehnder Caladair Freetime First Eco 2700

Zehnder Caladair Freetime First Eco 2700 Product Part Number Caladair FREETIME 2700 First Eco - CAL23 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 9487.67

1

Zehnder Caladair Carma 9035 First Eco

Zehnder Caladair Carma 9035 First Eco Product Part Number Caladair CARMA 9035 L First Eco - CAL16 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 14289.97

1

Zehnder Caladair Pyrostar Smoke and Air Handling Unit

Zehnder Caladair Pyrostar Smoke and Air Handling Unit Caladair Pyrostar is smoke and air handling unit that is suitable for external and internal applications. Pyrostar smoke extraction units met legal requirements for the extraction of smoke and hot gases in the event of a fire in high rise and public assembly buildings with a rating of 2hrs. The range is also designed for the intermediate or continuous extraction of contaminated air from industrial premises, professional kitchens and carparks. High quality bespoke units manufactured in Spain to order (please contact office for delivery date) Key features Smoke and air handling unit Suitable external and internal applications 2hr fire rating @400 degree CE certificate for smoke and heat extraction fans which comply with standard NF EN 12101-3 Extracts smoke and hot gases in the event of a fire Extracts contaminated air from industrial premises Belt pulley transmission with IE3 AC motor Flow rates from 600 to 50000 m3/h Pyrostar R is equipped with an epoxy paint backward wheel Pyrostar A is equipped with a forward wheel constructed of galvanised steel Condensate tray at bottom of unit (ECP option) for removal of condensates Variable drive pulley up to 5.5 kW Protective housing for the transmission on the fan compartment side, easily removable for belt replacement. Fitted with bird protection mesh on outlet Isolation switch installed on unit High quality Construction. Models Pyrostar range is available in 5 sizes and 20 models. The range covers flow rates from 600 to 50000 m3/hr either in impulse turbine version for pressures up to 1500 Pa, or reaction turbine versions for pressure up to 2600 Pa. The Pyrostar R version is fitted with a reaction turbine is especially suitable and recommended for applications in professional kitchens or for the extraction of foul contaminated air (car parks, industry, etc.). Available models: Pyrostar 4 / Pyrostar 6 / Pyrostar 10 / Pyrostar 12 / Pyrostar 15 / Pyrostar 20 / Pyrostar 25 / Pyrostar 30 / Pyrostar 40 / Pyrostar 50 Supply and extract connections are circular in models 4-12, models 15-50 are square connections. Pyrostar A models– impulse turbine and double opening, made from galvanised steel. It is balanced statically and dynamically

GBP 0.00

1

Brand

Merchant

Price (EUR)