1.855 results (0,20041 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

1/4" HSS S/S Jobber Drill

1/4" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials Notes Available in sizes 1/64" - 3/4"

GBP 0.00
1

1/2" HSS S/S Jobber Drill

1/2" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials Notes Available in sizes 1/64" - 3/4"

GBP 8.29
1

5x 1/16" HSS S/S Jobber Drill

5x 1/16" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials Notes Available in sizes 1/64" - 3/4"

GBP 4.95
1

Sherwood 1/64" HSS S/S Jobber Drill

Sherwood 1/64" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials Notes Available in sizes 1/64" - 3/4"

GBP 1.49
1

5x 1/4" HSS S/S Stub Drill

5x 1/4" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 4.20
1

Sherwood 1/2" HSS S/S Stub Drill

Sherwood 1/2" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 2.39
1

Sherwood 1/8" HSS S/S L/S Drill

Sherwood 1/8" HSS S/S L/S Drill

Series L100 HSS straight shank long series drills are general purpose high speed steel long series drills are designed for deep hole drilling of most materials. Features and Benefits High speed steel construction for increased tool toughness Extra length for deep drilling applications Black oxide coating for increased heat and wear resistance Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. Notes The drill has the same diameter on both the fluted section and the shank

GBP 2.14
1

100x Sherwood 1/4" HSS S/S Stub Drill

100x Sherwood 1/4" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 179.00
1

5x Sherwood 1/16" HSS S/S Stub Drill

5x Sherwood 1/16" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 2.60
1

Sherwood 1/32" HSS S/S L/S Drill

Sherwood 1/32" HSS S/S L/S Drill

Series L100 HSS straight shank long series drills are general purpose high speed steel long series drills are designed for deep hole drilling of most materials. Features and Benefits High speed steel construction for increased tool toughness Extra length for deep drilling applications Black oxide coating for increased heat and wear resistance Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. Notes The drill has the same diameter on both the fluted section and the shank

GBP 1.09
1

Sherwood 1/16" HSS S/S L/S Drill

Sherwood 1/16" HSS S/S L/S Drill

Series L100 HSS straight shank long series drills are general purpose high speed steel long series drills are designed for deep hole drilling of most materials. Features and Benefits High speed steel construction for increased tool toughness Extra length for deep drilling applications Black oxide coating for increased heat and wear resistance Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. Notes The drill has the same diameter on both the fluted section and the shank

GBP 1.09
1

5x Sherwood 1/8" HSS S/S Stub Drill

5x Sherwood 1/8" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 2.80
1

20x Sherwood 1/2" HSS S/S Stub Drill

20x Sherwood 1/2" HSS S/S Stub Drill

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

GBP 159.80
1

Sherwood 1/4" HSS S/S L/S Drill

Sherwood 1/4" HSS S/S L/S Drill

Series L100 HSS straight shank long series drills are general purpose high speed steel long series drills are designed for deep hole drilling of most materials. Features and Benefits High speed steel construction for increased tool toughness Extra length for deep drilling applications Black oxide coating for increased heat and wear resistance Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. Notes The drill has the same diameter on both the fluted section and the shank

GBP 4.19
1

Sherwood 1/4" HSS S/S Jobber Drill

Sherwood 1/4" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials

GBP 1.29
1

Sherwood 1/2" HSS S/S Jobber Drill

Sherwood 1/2" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials

GBP 8.29
1

10x Sherwood 1/16" HSS S/S Jobber Drill

10x Sherwood 1/16" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials

GBP 1.90
1

5x Sherwood 1/8" HSS S/S Jobber Drill

5x Sherwood 1/8" HSS S/S Jobber Drill

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits General purpose drills with a black oxide finish Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards Manufactured to BS 328/DIN338RN Typical Applications Cutting and drilling Ferrous materials

GBP 3.95
1

Sherwood 1" HSS T/S Sp/Fl Machine Reamer

Sherwood 1" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 55.99
1

Sherwood 1/8" HSS T/S Sp/Fl Machine Reamer

Sherwood 1/8" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 17.99
1