19 results (0,12675 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Scope CX6F4AC 1-Watt Output Connexions Paging Transmitter For F-Link System

Scope CX6F4AC 1-Watt Output Connexions Paging Transmitter For F-Link System

Scope CX6F4AC 1-Watt Output Connexions Paging Transmitter ForF-Link SystemThe Connexions System has always provided the latest inon-site paging technology at a realistic price its modular design conceptallows you to buy the basic unit and to add to it as your companys needschange so the initial outlay is kept to a minimum.Flexibility has always been the key word with the ScopeConnexions Systems with its modular high-performance interfaces enablingrobust connectivity to many host devices. They include connection to internaltelephone PC network RS232 RS485 USB dry-contacts and voltage triggers.There is also an internal protocol conversion option which enables thetranslation of incoming RS232 data from host hardware into paging dataproviding paging from various fire intruder nurse call building managementsystems etc.The basic unit has two RS232 ports and eight dry contactinputs which enables the system to be hard wired to anything from an alarmcontrol panel to a front door bell to alert prescribed users in the event thatrequired criteria occur. All Connexions systems are supplied configured withdefault settings and are able to support up to 4-digit pager numbers asstandard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies whichgive an incredibly high degree of reliability in terms of the signallingsuccess within a commercial environment whilst using very small andunobtrusive aerials. It uses the same international standard digital signallingsystem POCSAG deployed by most wide area paging companies. This is acceptedto be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection toalmost any fire security or nursecall panelIncludes aerial interface leadMains powered

GBP 753.48
1

Scope CX6F4DC 1-Watt Output Connexions Paging Transmitter For F-Link System

Scope CX6F4DC 1-Watt Output Connexions Paging Transmitter For F-Link System

Scope CX6F4DC 1-Watt Output Connexions Paging Transmitter For F-Link SystemThe Connexions System has always provided the latest inon-site paging technology at a realistic price its modular design conceptallows you to buy the basic unit and to add to it as your companys needschange so the initial outlay is kept to a minimum.Flexibility has always been the key word with the ScopeConnexions Systems with its modular high-performance interfaces enablingrobust connectivity to many host devices. They include connection to internaltelephone PC network RS232 RS485 USB dry-contacts and voltage triggers.There is also an internal protocol conversion option which enables thetranslation of incoming RS232 data from host hardware into paging dataproviding paging from various fire intruder nurse call building managementsystems etc.The basic unit has two RS232 ports and eight dry contactinputs which enables the system to be hard wired to anything from an alarmcontrol panel to a front door bell to alert prescribed users in the event thatrequired criteria occur. All Connexions systems are supplied configured withdefault settings and are able to support up to 4-digit pager numbers asstandard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies whichgive an incredibly high degree of reliability in terms of the signallingsuccess within a commercial environment whilst using very small andunobtrusive aerials. It uses the same international standard digital signallingsystem POCSAG deployed by most wide area paging companies. This is acceptedto be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection toalmost any fire security or nursecall panelIncludes aerial interface leadRequires a 12VDC 1A PSU

GBP 585.00
1

Scope EPOCBMPG EPOC IOT Transceiver

Scope EPOCBMPG EPOC IOT Transceiver

Scope EPOCBMPG EPOC IOT TransceiverDespite its lightness EPOCBLUM is a rugged paging device offering high-performance features rugged case IP 67 protection rate RFID tag inside and a large display with colour backlight. EPOCBLUM is a 128 RIC pager available in many frequency ranges in synthesized version for POCSAG. EPOCBLUM is also able to transmit POCSAG messages.This enables the EPOCBLUM to be used not just as a pager but as a 2-way communication handheld device for Man-Down SOS Lockdown and preset messages with optional location added to the message by a press of one of the EPOCBLUM buttons.The EPOCBLUM carries a GPS module for outdoor geolocation and a BT one for indoor geolocation with BT beacons of Scope solution. It is bundled with a desktop charger which offers a very compact and functional design.The EPOCBLUM is equipped with an LED flashing light high luminosity to advise that an alarm is being received. Remote pager fleet management is also available for EPOCBLUM thanks to its EPOCBLUM solution.Despite its lightness EPOCBLUM is a rugged paging device offering high-performance features rugged case IP 67 protection rate RFID tag inside and a large display with a colour backlight.This 128 RIC pager available in many frequency ranges in synthesized version for POCSAG networks.The EPOCBLUM is also able to transmit POCSAG messages through a centralization receiver. This enables us to use it as a pager with acknowledgment receipt Man-Down and SOS transmit functions etc. It offers also IoT transmission capability and can work under LoRa or Sigfox networks. It carries a GPS module for outdoor geolocation and a BT one for indoor geolocation with BT beacons of Scope solution.Message service features- Receiver addresses up to 128 numeric andor alphanumeric addresses- Possibility of 4 sub-addresses by address with pre-fixed message- Memory maximum No of messages up to 20 messages of 326 characters each for the user and 64Messages in internal non-volatile memory- Unread message alert- Alert melodies 21 tones- Vibrate alert Tone and vibrate Vibrate then tone- Flash led- Silent mode- Low battery warning- LCD up to 8 lines of 16 characters backlight multicolours modifiable zoom- Option Partial Over-The-Air OTA programmingGeneral Features- Li-Ion battery 3.7V950mA- Accelerometer for Man Down features and to allow the reading of messages in all positions- Languages French English German Spanish Dutch Slovenian.- Weight 90 grs- Size 974 x 547 x 167 mm- Supplied with 1 belt clip 1 lanyard- Operating humidity and temperature from -10C to 60C 95 at 40C- Storage humidity and temperature from -10C to 70C 95 at 40C- Contact relay for external output alert siren remote controlPOCSAG features- Receiver- Frequencies All VHF UHF 900MHz are available upon request- Channel spacing 12.52025 KHz- Transmission speed 512bps or 1200bps or 2400bps- Modulation NRZ- Frequency deviation - 4.5KHz- Sensitivity 2.5Vm 1200bps 3.0Vm 2400bps 3.5Vm Selectivity 65dB -25KHz- Intermodulation protection 65 dB- Frequency stability 8 ppm- Alert signal 86dBA 30 cm- frequency 2731HzTransmission POCSAG- Output power up to 14dBm- Frequency 438-470MHz866-870MHz900MHz- Channel spacing 12.52025 KHz- Transmission speed 512bps or 1200bps or 2400bps- Modulation NRZ FSK- Frequency deviation 2.25KHz- 12.5KHz 3.6KHz 20KHz - 4.5KHz 25KHz- Modulation rise time 250s 25s- Frequency stability 8 ppmBT module- Modulation BT Low Energy 4.2- Frequency ISM 2.4GHz- Receiver Sensitivity -92dBmGPS module specification- High sensitivity GPS - 165 dBm- 66 channels GPS - Cold Start 35 seconds- Hot Start 1 second - PTI functionality

GBP 245.70
1

Scope EPOCBLUM EPOC IOT with Lite Charger 456-460MHZ

Scope EPOCBLUM EPOC IOT with Lite Charger 456-460MHZ

Scope EPOCBLUM EPOC IOT with Lite Charger 456-460MHZDespite its lightness EPOCBLUM is a rugged paging device offering high-performance features rugged case IP 67 protection rate RFID tag inside and a large display with colour backlight. EPOCBLUM is a 128 RIC pager available in many frequency ranges in synthesized version for POCSAG. EPOCBLUM is also able to transmit POCSAG messages.This enables the EPOCBLUM to be used not just as a pager but as a 2-way communication handheld device for Man-Down SOS Lockdown and preset messages with optional location added to the message by a press of one of the EPOCBLUM buttons.The EPOCBLUM carries a GPS module for outdoor geolocation and a BT one for indoor geolocation with BT beacons of Scope solution. It is bundled with a desktop charger which offers a very compact and functional design.The EPOCBLUM is equipped with an LED flashing light high luminosity to advise that an alarm is being received. Remote pager fleet management is also available for EPOCBLUM thanks to its EPOCBLUM solution.Despite its lightness EPOCBLUM is a rugged paging device offering high-performance features rugged case IP 67 protection rate RFID tag inside and a large display with a colour backlight.This 128 RIC pager available in many frequency ranges in synthesized version for POCSAG networks.The EPOCBLUM is also able to transmit POCSAG messages through a centralization receiver. This enables us to use it as a pager with acknowledgment receipt Man-Down and SOS transmit functions etc. It offers also IoT transmission capability and can work under LoRa or Sigfox networks. It carries a GPS module for outdoor geolocation and a BT one for indoor geolocation with BT beacons of Scope solution.The EPOCBLUM is bundled with a desktop charger which offers a very compact and functional design. A Lite model is also available.Message service features- Receiver addresses up to 128 numeric andor alphanumeric addresses- Possibility of 4 sub-addresses by address with pre-fixed message- Memory maximum No of messages up to 20 messages of 326 characters each for the user and 64Messages in internal non-volatile memory- Unread message alert- Alert melodies 21 tones- Vibrate alert Tone and vibrate Vibrate then tone- Flash led- Silent mode- Low battery warning- LCD up to 8 lines of 16 characters backlight multicolours modifiable zoom- Option Partial Over-The-Air OTA programmingGeneral Features- Li-Ion battery 3.7V950mA- Accelerometer for Man Down features and to allow the reading of messages in all positions- Languages French English German Spanish Dutch Slovenian.- Weight 90 grs- Size 974 x 547 x 167 mm- Supplied with 1 belt clip 1 lanyard- Operating humidity and temperature from -10C to 60C 95 at 40C- Storage humidity and temperature from -10C to 70C 95 at 40C- Contact relay for external output alert siren remote controlPOCSAG features- Receiver- Frequencies All VHF UHF 900MHz are available upon request- Channel spacing 12.52025 KHz- Transmission speed 512bps or 1200bps or 2400bps- Modulation NRZ- Frequency deviation - 4.5KHz- Sensitivity 2.5Vm 1200bps 3.0Vm 2400bps 3.5Vm Selectivity 65dB -25KHz- Intermodulation protection 65 dB- Frequency stability 8 ppm- Alert signal 86dBA 30 cm- frequency 2731HzTransmission POCSAG- Output power up to 14dBm- Frequency 438-470MHz866-870MHz900MHz- Channel spacing 12.52025 KHz- Transmission speed 512bps or 1200bps or 2400bps- Modulation NRZ FSK- Frequency deviation 2.25KHz- 12.5KHz 3.6KHz 20KHz - 4.5KHz 25KHz- Modulation rise time 250s 25s- Frequency stability 8 ppmBT module- Modulation BT Low Energy 4.2- Frequency ISM 2.4GHz- Receiver Sensitivity -92dBmGPS module specification- High sensitivity GPS - 165 dBm- 66 channels GPS - Cold Start 35 seconds- Hot Start 1 second - PTI functionality

GBP 304.20
1

Scope GEO87ZM GEO Zoom 4 - 8 Line Text Pager

Scope GEO87ZM GEO Zoom 4 - 8 Line Text Pager

Scope GEO87ZM GEO Zoom 4 - 8 Line Text PagerTThe 87Z Geo Zoom has 8 lines of big clearly readable text. For low light conditions cool blue backlighting further enhances the viewing experience.Key FeaturesAlphaNumeric pager20000 character memoryAddress frequency hand programmable password protectedBS5839-1 CompliantStorage Repeat message rejection optional 12510 minutes or disabledLow Battery indicatorOut of Range NO Service IndicatorRepeat Message IndicatorError Message IndicatorUnread Message IndicatorAlert Modes Vibrate Tone Quiet Tone MuteAlert Length 8 16 32 or 64 second programmableUrgent Call Tone VibrateReal Time Clock with Alarm

GBP 148.20
1

Scope Connexions CX6M Mains Powered Transmitter with Protocol Module

Scope Connexions CX6M Mains Powered Transmitter with Protocol Module

Scope Connexions CX6M Mains Powered Transmitter with Protocol ModuleThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHz

GBP 973.44
1

Scope Connexions CX6DC 12v Transmitter

Scope Connexions CX6DC 12v Transmitter

Scope Connexions CX6DC 12v TransmitterThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHz

GBP 569.40
1

Scope Connexions CX6 Mains Powered Transmitter

Scope Connexions CX6 Mains Powered Transmitter

Scope Connexions CX6 Mains Powered TransmitterThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHz

GBP 622.44
1

Scope Connexions CX6MDC 12v Transmitter with Protocol Module

Scope Connexions CX6MDC 12v Transmitter with Protocol Module

Scope Connexions CX6MDC 12v Transmitter with Protocol ModuleThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHz

GBP 920.40
1

Scope RX2 Mk2 Two Channel POCSAG Receiver with Logging Facilities

Scope RX2 Mk2 Two Channel POCSAG Receiver with Logging Facilities

Scope RX2 Mk2 Two Channel POCSAG Receiver with Logging FacilitiesThe new RX2 Mk2 is a complete re-design of the original RX2OEM. It is now supplied cased and programmed ready to go though there is still an OEM uncased version available. It has two zones with relay outputs a RS232 output and a USB port for programming. There is also a microSD slot with 8Gb card for recording event log data.The card also contains the programming software enabling complete control of the configuration of the unit from a PC and for downloading and analysing the data contained in the log. It is also possible to monitor live incoming data in text and graphical format.Key FeaturesReceives monitors and logs POCSAG dataTwo zone relay outputs RS232 output USB programming portMicroSD slot for event loggingPC software suppliedHigh quality category 1.5 receiver module EN 300 220-1 v3.1Frequency range of 430MHz to 470 MHzPower requirement is 12v - 13.8v DC maximum current draw is 126mA

GBP 315.90
1

Scope PTPRO2LM PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - With Serial

Scope PTPRO2LM PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - With Serial

Scope PTPRO2LM PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - With SerialThe PTPRO2LM is a PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - With Serial.Scope PageTek Pro 2 Industrial Strength paging systems designed for use with professional Fire and Security systems installed in commercialindustrial premises. The system is primarily designed to alert the hearing impaired in the event of a fire or other emergency where an audible sounder is the normal means of indication. Main users include factories offices universities schools hospitals hotels and public buildings.The Pagetek Pro System is designed to comply with the recommendations detailed in BS5839-1 2013 for alerting the hearing impaired to the activation of a Fire Alarm System. The system can also be used in conjunction with a security alarm panel to alert guards who might be located remote from the main premises.The interface to the host Fire alarm system comprises of multiple prioritised Fire inputs and a further input to provide for fault indication from the Fire panel. For ease of installation a monitored interface cable is provided with the system which also includes a common fault relay output back to the host Fire alarm panel. This will activate if the PageTek Pro suffers a mains failure transmitter fault antenna mismatch link failure low battery or missing battery condition.Upon activation of any Fire Zone input the PageTek Pro system will enter the fire alert condition prioritising and transmitting the Fire message to all pagers. The transmissions will be repeated until the fire condition is reset. Special format Scope pagers ensure that users are alerted by distinct vibrate patterns and clear text messages.Key FeaturesUHF radio link for maximum licensable protectionUnique coding avoids neighbouring system clashesSelf-monitoring of system healthRugged steel enclosure to IP65Backlit 2 line Text Display continuously reports system statusAdditional Visible Audible status indicatorsPrioritised Fire Alarm Inputs and Fault inputsAutomated test calls alert pagers to loss of radio signalFault notification to the host Control Equipment via monitored linkKey locked System Test facility for routine confidence checkingOver 90 hours backup operation with internally fitted batteryAdd on AnswerTek Pro receiver system for additional monitoring reporting of radio signal IntegrityRS232 serial input for other messagingOptional Ethernet card and additional RS232 inputHigh power transmitter provides 2w ERP RF output for enhanced coverage of large sites

GBP 1443.00
1

Scope PTPRO2L PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - 1.0W RF Output

Scope PTPRO2L PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - 1.0W RF Output

Scope PTPRO2L PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - 1.0W RF OutputThe PTPRO2L is a PageTek Pro 2 Paging Transmitter For The Hard Of Hearing - 1.0W RF Output.Scope PageTek Pro 2 Industrial Strength paging systems designed for use with professional Fire and Security systems installed in commercialindustrial premises. The system is primarily designed to alert the hearing impaired in the event of a fire or other emergency where an audible sounder is the normal means of indication. Main users include factories offices universities schools hospitals hotels and public buildings.The Pagetek Pro System is designed to comply with the recommendations detailed in BS5839-1 2013 for alerting the hearing impaired to the activation of a Fire Alarm System. The system can also be used in conjunction with a security alarm panel to alert guards who might be located remote from the main premises.The interface to the host Fire alarm system comprises of multiple prioritised Fire inputs and a further input to provide for fault indication from the Fire panel. For ease of installation a monitored interface cable is provided with the system which also includes a common fault relay output back to the host Fire alarm panel. This will activate if the PageTek Pro suffers a mains failure transmitter fault antenna mismatch link failure low battery or missing battery condition.Upon activation of any Fire Zone input the PageTek Pro system will enter the fire alert condition prioritising and transmitting the Fire message to all pagers. The transmissions will be repeated until the fire condition is reset. Special format Scope pagers ensure that users are alerted by distinct vibrate patterns and clear text messages.Key FeaturesUHF radio link for maximum licensable protectionUnique coding avoids neighbouring system clashesSelf-monitoring of system healthRugged steel enclosure to IP65Backlit 2 line Text Display continuously reports system statusAdditional Visible Audible status indicatorsPrioritised Fire Alarm Inputs and Fault inputsAutomated test calls alert pagers to loss of radio signalFault notification to the host Control Equipment via monitored linkKey locked System Test facility for routine confidence checkingOver 90 hours backup operation with internally fitted batteryAdd on AnswerTek Pro receiver system for additional monitoring reporting of radio signal IntegrityRS232 serial input for other messagingOptional Ethernet card and additional RS232 inputHigh power transmitter provides 2w ERP RF output for enhanced coverage of large sites

GBP 1365.00
1