atlantic dulse benefits from GBP 190 | See the cheapest prices and offers on Cobiro CSS.com

10x SNMX 170508SR-M M9325 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 229.90

1

10x SNMX 170508SR-R M9325 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

PSBNL 5050 T 2512 External Turn Holder Left Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 25.4mm, and a thickness of 12mm. 50mm tool height x 50mm width x 300mm long for taper turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 259.99

1

10x SNMX 170508SR-R M5315 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

10x SNMX 170508SR-R M8340 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

10x SNMX 170508SR-M M6330 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

10x SNMX 170508SR-M M8330 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

PSBNR 5050 T 2512 External Turn Holder Right Hand

These turning toolholders were designed to hold a square negative insert with an inscribed circle diameter of 25.4mm, and a thickness of 12mm. 50mm tool height x 50mm width x 300mm long for taper turning and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 259.99

1

10x SNMX 170508SR-M M9340 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

10x SNMX 170508SR-R M8330 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 219.90

1

10x SNMX 170508SR-M M8340 ON06 43 Face Mill Insert

SNMX is a double-sided square milling insert with a maximum depth of cut of 7.0mm, and 0.8mm corner radius. This milling insert was designed for the machining of steel and cast steel, with face mills SON06C, and features PVD-coated, functionally graded, WC-Co carbide.Features and Benefits PVD coating for improved heat and wear resistance 16-edged pressed insert Typical Applications Stainless Steel Steel Cast Steel

GBP 229.90

1

10x 8281480 Pss 525 Spare Shim

These Pramet spare shims were meticulously engineered to meet the diverse needs of machining professionals across various industries.Features and Benefits Crafted from top-quality materials, ensuring exceptional durability and extended tool life Precision-engineered to deliver outstanding performance, precision, and reliability Exceptionally versatile, these parts are capable of handling a wide range of materials, including metals, plastics, and composites Tool geometry designed to enhance cutting efficiency, minimize tool wear, and improve surface finish, resulting in high-quality machined components

GBP 399.90

1

10x CNMX 191140SN-TF T9415 Heavy Duty Railway Insert

These double-sided 80 rhomboid CNMX turning inserts have a negative insert geometry and were designed for the medium to heavy machining of steels. The inscribed circle has a diameter of 19.05mm, 11mm thickness, and a 4mm nose radius. Features and Benefits T9415 is the most advanced MT-CVD coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Typical Applications Steel Cast Steel

GBP 189.90

1

10x DNMG 150604E-NMR T9415 Turning Insert - Negative

These double-sided 55 rhomboid DNMG turning inserts have a positive insert geometry and were designed for the fine to heavy machining of steels. The inscribed circle has a diameter of 12.7mm, 6.35mm thickness, and a 0.4mm nose radius. Features and Benefits The insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Typical Applications Steel Cast Steel

GBP 214.90

1

PRDCN 5050 V 32 External Turning Holder

This lever-lock turning toolholder was designed to hold a round positive insert with a diameter of 32mm and a thickness of 9.52mm. The toolholder is neutral, so suitable for use with either hand. 50mm tool height x 50mm width x 400mm long for taper turning, single and multi-directional copy turning, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability

GBP 259.99

1

10x CNMX 191140SN-RF T9415 Heavy Duty Railway Insert

These double-sided 80 rhomboid CNMX turning inserts have a negative insert geometry and were designed for the medium to heavy machining of steels. The inscribed circle has a diameter of 19.05mm, 11mm thickness, and a 4mm nose radius. Features and Benefits T9415 is the most advanced MT-CVD coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Typical Applications Steel Cast Steel

GBP 189.90

1

10x DNMG 150608E-FM T9415 Turning Insert - Negative

These double-sided 55 rhomboid DNMG turning inserts have a positive insert geometry and were designed for the fine to heavy machining of steels. The inscribed circle has a diameter of 12.7mm, 6.35mm thickness, and a 0.8mm nose radius. Features and Benefits The insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds and abrasion resistance Typical Applications Steel Cast Steel

GBP 214.90

1

5x LNMT 311240 T9415 Heavy Duty Railway Insert

LNMT is a single-sided negative barpeeling insert with a length of 31.0mm, thickness of 12.0mm and a 4.0mm depth of cut. This milling insert was designed for the machining of steel and features MT-CVD coated, functionally graded WC-Co carbide. Features and Benefits Stable clamping and strong cutting-edge ideal for square shoulder milling, PVD coating provides long tool life and excellent breakage resistance, while also reducing chatter Processed post-treatment to improve toughness and reliability of cutting edge Typical Applications Steel Cast Steel

GBP 199.95

1

10x DNMG 150608-NRM T9415 Turning Insert - Negative

These double-sided 55 rhomboid DNMG turning inserts have a positive insert geometry and were designed for the fine to heavy machining of steels. The inscribed circle has a diameter of 12.7mm, 6.35mm thickness, and a 0.8mm nose radius. Features and Benefits The insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds and abrasion resistance Typical Applications Steel Cast Steel

GBP 214.90

1

10x SNMX 191140SN-TF T9415 Heavy Duty Railway Insert

SNMX is a single-sided square negative turning insert with an inscribed circle diameter of 19.05mm, 11mm thickness, and a 4mm nose radius. This turning insert was designed for the machining of steel and features MT-CVD coated, functionally graded WC-Co carbide. Features and Benefits Stable clamping and strong cutting-edge ideal for square shoulder milling, PVD coating provides long tool life and excellent breakage resistance, while also reducing chatter Processed post-treatment to improve toughness and reliability of cutting edge Typical Applications Steel Cast Steel

GBP 219.90

1

10x RNMG 250900E-081 T9415 Turning Insert - Negative

This round RNMG turning insert has a 0 clearance, and negative insert geometry and was designed for the medium to heavy machining of steels. The insert has a diameter of 25.4mm and a thickness of 9.52mm. Features and Benefits Each insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Processed post-treatment to improve the toughness and reliability of cutting-edge Typical Applications Steel Cast Steel

GBP 249.90

1

10x SNMG 250924E-RM T9415 Turning Insert - Negative

These double-sided square SNMG turning inserts have a negative insert geometry and were designed for the medium to heavy machining of steels. The inscribed circle has a diameter of 25.4mm, 9.52mm thickness, and a 2.4mm nose radius. Features and Benefits Each insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Processed post-treatment to improve the toughness and reliability of cutting-edge Typical Applications Steel Cast steel

GBP 329.90

1

10x SNMG 250924-NRM T9415 Turning Insert - Negative

These double-sided square SNMG turning inserts have a negative insert geometry and were designed for the medium to heavy machining of steels. The inscribed circle has a diameter of 25.4mm, 9.52mm thickness, and a 2.4mm nose radius. Features and Benefits Each insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Processed post-treatment to improve the toughness and reliability of cutting-edge Typical Applications Steel Cast steel

GBP 329.90

1

5x RCMT 3009MO-RR4 T9415 Turning Insert - Positive

This single-sided round RCMT turning insert has a 7 clearance, positive insert geometry, and was designed for the fine to heavy machining of steels. The insert has a diameter of 30.0mm, and a 9.52mm thickness. Features and Benefits The insert is of the highest coated turning grade, bringing greater stability and performance in a variety of cutting conditions Thicker coating significantly improves tool durability and increases productivity by allowing for higher cutting speeds Processed post-treatment to improve toughness and reliability of cutting edge Typical Applications Steel Cast Steel Cast Iron

GBP 219.95

1

16A2R025M08-SWN04C-C SWN04 Mould & Die End Mill

Copy face mill with double negative geometry utilising 2 double-sided inserts. Cutting diameter of 16mm with a 90 approach angle and M08 threaded shank for standard modular tool-holders. 25mm functional and, through coolant for face milling, shallow shoulder milling, deep shoulder milling, plunge milling, copy milling and ramping with a maximum depth of cut of 0,5 (2,0)mm. Features and Benefits Clamping design with self-centering capability for high precision clamping Blackening instead of nickelizing makes all tolerances even tighter Typical Applications Copy and profile milling

GBP 299.99

1

Brand

Merchant

Price (EUR)

10x SNMX 170508SR-M M9325 ON06 43 Face Mill Insert

10x SNMX 170508SR-R M9325 ON06 43 Face Mill Insert

PSBNL 5050 T 2512 External Turn Holder Left Hand

10x SNMX 170508SR-R M5315 ON06 43 Face Mill Insert

10x SNMX 170508SR-R M8340 ON06 43 Face Mill Insert

10x SNMX 170508SR-M M6330 ON06 43 Face Mill Insert

10x SNMX 170508SR-M M8330 ON06 43 Face Mill Insert

PSBNR 5050 T 2512 External Turn Holder Right Hand

10x SNMX 170508SR-M M9340 ON06 43 Face Mill Insert

10x SNMX 170508SR-R M8330 ON06 43 Face Mill Insert

10x SNMX 170508SR-M M8340 ON06 43 Face Mill Insert

10x 8281480 Pss 525 Spare Shim

10x CNMX 191140SN-TF T9415 Heavy Duty Railway Insert

10x DNMG 150604E-NMR T9415 Turning Insert - Negative

PRDCN 5050 V 32 External Turning Holder

10x CNMX 191140SN-RF T9415 Heavy Duty Railway Insert

10x DNMG 150608E-FM T9415 Turning Insert - Negative

5x LNMT 311240 T9415 Heavy Duty Railway Insert

10x DNMG 150608-NRM T9415 Turning Insert - Negative

10x SNMX 191140SN-TF T9415 Heavy Duty Railway Insert

10x RNMG 250900E-081 T9415 Turning Insert - Negative

10x SNMG 250924E-RM T9415 Turning Insert - Negative

10x SNMG 250924-NRM T9415 Turning Insert - Negative

5x RCMT 3009MO-RR4 T9415 Turning Insert - Positive

16A2R025M08-SWN04C-C SWN04 Mould & Die End Mill