37 results (0,16510 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

DBO382RTJ LXT Finishing Sander 18V 2 x 5.0Ah Li-ion

DBO382RTJ LXT Finishing Sander 18V 2 x 5.0Ah Li-ion

The Makita DBO382 LXT Finishing Sander is equipped with a powerful brushless motor. 3-stage electronic speed control and constant speed control allow you to precisely control your work, providing better end results. Its ergonomic rubberised grip and handle provided added user comfort. The front grip is detachable without tools for corner sanding. Specifications: Orbits per Minute: 0-12, 000/min. Sanding Orbit Diameter: 2.0mm. Sanding Pad Dimensions: 93 x 185mm. Dimensions of Clamped Abrasive Sheet: 93 x 228mm. The Makita DBO382RTJ LXT Finishing Sander is supplied with: 1 x Dust Box + Paper Bag. 1 x Punch Plate. 2 x 18V 5.0Ah Li-ion Batteries. 1 x DC18RC LXT Battery Charger. 1 x MAKPAC Type 3 Case. Technical Specs Orbits per Minute: 0-12, 000/min. Sanding Orbit Diameter: 2.0mm. Sanding Pad Dimensions: 93 x 185mm. Dimensions of Clamped Abrasive Sheet: 93 x 228mm.

GBP 459.99
1

HM1317C 30mm Hex Demolition Hammer with Avt (240V)

HM1317C 30mm Hex Demolition Hammer with Avt (240V)

Makita HM1317C 30mm Hex Demolition Hammer with AVT (240V) The Makita HM1317C 240V boasts high durablity and excellent demolition performance. Fitted with anti-vibration technology to ensure extra-low vibration and protection for the operator. Suppression of motor speed during no-load reduces vibration of tool body. It has a 30mm Hex Drive and delivers an impact energy of 25 Joules and up to 1450 blows per minute. Sold in both 110V and 240V models. Comes in a very large wheeled Carry Case with a Side Handle and Bull Point Chisel. Features: LED lamp indicates when to replace carbon brush Double Insulation Variable speed Constant speed under load Soft start Comes With: Side handle Bull point chisel Carry case Specification: Blows per minute: 730-1450 bpm Input wattage: 1510 w Drive shank Hex: 30mm Vibration: Chiselling: 8.5 m/sec Vibration K factor: 1.5 m/sec Noise sound pressure: 81 dB(A) Noise sound power: 101 dB(A) Noise K factor: 2.4 dB(A) Net weight: 17 kg Impact energy (High): 25.0 J Impact energy (Low): 21.0 J

GBP 999.99
1

HM0871C/2 SDS Max Demolition Hammer Avt 240V

HM0871C/2 SDS Max Demolition Hammer Avt 240V

HM0871C High performance, ergonomically designed handle with easy-to-operate slide switch. Electronic with variable speed control by dial. LED service light that indicates when to replace carbon brush. LED power light that indicates trouble with the electric circuit. Constant speed control. One touch sliding chuck for easy bit changes. Vibration absorbing handle. Continuous rating input: 1,100W. Max. joules: 11.6J. Blows per minute: 1,100 - 2,650bpm. Overall length: 466mm. Power supply cord: 5.0m. Supplied with: side handle (bar shaped) (135332-7) bit grease (194659-4), and carry case.

GBP 529.99
1

HM1511 30mm Hex Electric Breaker with Avt (240V)

HM1511 30mm Hex Electric Breaker with Avt (240V)

The Makita HM1511 240V Electric Breaker anti-vibration housing and AVT for reduced operator fatigue The HM1511 series of corded electric breakers are developed based on the HM1317C series. This newer version has drastically increased power with lower vibration, with only a minimum increase in tool size and weight. It has a 30mm Hex Drive and delivers an impact energy of 48.9 Joules and up to 1300 blows per minute. Sold in both 110V and 240V models. Comes in a very large wheeled Carry Case with a Side Handle and Bull Point Chisel. Features: Anti-vibration housing and AVT for reduced operator fatigue Soft start "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body. Double Insulation High power Service indicator lamp that indicates when to replace carbon brush On/off slide switch. Power-ON indicator lamp Comes With: Side handle Bull point chisel Carry case Specification: Impact energy: 48.9 J Blows per minute: 1300 bpm Drive shank Hex: 30mm Vibration: Chiselling: 6.5 m/sec Vibration K factor: 1.5 m/sec Noise sound pressure: 85 dB(A) Noise sound power: 105 dB(A) Noise K factor: 1.57 dB(A) Net weight: 19.2 kg Input Wattage 110v: 1,550 w Input Wattage 240v: 1,850 w

GBP 1299.99
1

2012NB Planer / Thicknesser 1650W 240V MAK2012NB

2012NB Planer / Thicknesser 1650W 240V MAK2012NB

The Makita 2012NB Planer/Thicknesser has an easy adjustment for an accurate and even finish with a fine depth adjustment. It has a large material capacity and the downward pressure system stops sniping of the timber when feeding in materials. It is double insulated for increased protection. It is supplied with a wrench, magnetic holder and a dust extraction hood. Specification Input Power 1,650W No Load Speed 8,500/min. Planing Width 304mm Feed Rate 8.5m/min. Planing Depth (Per Pass) 3mm 150mm wide, 1.5mm 150mm wide Weight 28.1kg Noise sound power 99 dBA Noise sound pressure 86 dBA Noise K factor 3 dBA

GBP 719.99
1

DTD154RTJ 18V LXT B/L Impact Driver 2X5.0AH

DTD154RTJ 18V LXT B/L Impact Driver 2X5.0AH

This cordless impact driver is an internal hex chuck to fit hexagonal bolts and machine screws. It features a brushless motor that generates less heat buildup which is ideal for use in manufacturing/production applications and eXtreme Protection Technology (XPT) offers maximum protection against dust and liquids. Features and Benefits Brushless motor Highly durable and lightweight eXtreme Protection Technology extends tool longevity Voltage: 18v Max Torque: 170Nm No Load Speed: 0-3400rpm Screw Capacity: M4-M8 Bolt Capacity: M5-M16 Thread Length: 22-125 Impacts per Minute: 0-3600ipm Driving Hex Shank: 1/4" Overall Length: 126mm

GBP 639.99
1

2012NB Planer / Thicknesser 1650W 110V MAK2012NBL

2012NB Planer / Thicknesser 1650W 110V MAK2012NBL

The Makita 2012NB Planer/Thicknesser has an easy adjustment for an accurate and even finish with a fine depth adjustment. It has a large material capacity and the downward pressure system stops sniping of the timber when feeding in materials. It is double insulated for increased protection. It is supplied with a wrench, magnetic holder and a dust extraction hood. Specification Input Power 1,650W No Load Speed 8,500/min. Planing Width 304mm Feed Rate 8.5m/min. Planing Depth (Per Pass) 3mm 150mm wide, 1.5mm 150mm wide Weight 28.1kg Noise sound power 99 dBA Noise sound pressure 86 dBA Noise K factor 3 dBA

GBP 719.99
1

GN900SE 7.2V First Fix Gas Nailer (2 X 1.5Ah Batteries)

GN900SE 7.2V First Fix Gas Nailer (2 X 1.5Ah Batteries)

Makita GN900SE 7.2 Volt First Fix Gas Nailer complete with 2 batteries and carrying case. The Makita GN900 is a cordless clipped head framing nailer developed for a wide range of framing applications. High performance and hoseless it uses fuel gas (not supplied) as the power source to provide freedom from compressors. Makitas tried and tested Lithium-ion 7.2 volt battery system is capable of a full charge in 30 minutes. With LED low battery and error detection system, and a shock absorbing battery fitting to protect the terminals. The top of the machine is fitted with protective bumpers to protect workpiece and the nailer from knocks and scratches. This also doubles as a gripper to stop it sliding down inclined surfaces such as a sloping roof. Fitted with a dual position hook, handy for hanging from rafters or piping. Professional Builder Magazine said the GN900SE Nailer "Should reduce downtime in that it recharges 4 times faster and has the power to drive home 75mm long full ring nails and 90mm smooth nails. The nailer will deliver 1200 nails for each 80ml canister of gas and up to 4000 nails per battery charge. In timber frame applications the depth of the nail finish is dependent on the type of timber being used and can be adjusted to 5 different settings by a fingertip adjuster on the front of the machine." Features: Equipped with LED indication lamp with battery power warning and trouble detection functions for convenience of operation and repair Quick and easy loading system 7.2V Li-ion Battery allows lightweight design Chargeable in approximately 30 minutes Air filter protects cylinder from dirt and debris to prevent malfunction Gas cell chamber quick and easy load system Contact nose 5 stage depth adjustment and anti slip contact Comes With: 2 x Li-ion 7.2v 1Ah Batteries Charger Safety Glasses Carry Case Specification: Max Length: 50-90mm Gauge: 2.9 -3.3 Shots per Battery: 4, 000 Shots per gass cell: 1, 2000 Magazine Angle: 34 degrees Charging Time: 30 minutes Magazine Capacity: 44 Net Weight: 3.5kg 7.2 Volts

GBP 519.99
1

DJS161RTJ LXT Metal Shear 18V 2 x 5.0Ah Li-ion

DJS161RTJ LXT Metal Shear 18V 2 x 5.0Ah Li-ion

The Makita DJS161 LXT Metal Shear for straight and curved cuts. Its high-performance double blade minimises material distortion and produces clean cuts with minimal burrs. Slide switch operation with lock-on function for ease of use. Its anti-restart function (with warning lamp) provides increased user safety. Specifications: Strokes per Minute: 4, 300/min. Min. Cutting Radius: 250mm. Capacity: Mild Steel 1.6mm, Aluminium 2.5mm, Stainless Steel 1.2mm. Weight: 1.8kg. The Makita DJS161RTJ LXT Metal Shear is supplied with: 2 x 18V 5.0Ah Li-ion Batteries. 1 x DC18RC LXT Li-ion Battery Charger. 1 x Hex Wrench. 1 x MAKPAC Type 2 Case.

GBP 1019.99
1

DBN500ZJ LXT Brad Nailer 18V Bare Unit

DBN500ZJ LXT Brad Nailer 18V Bare Unit

The Makita DBN500 LXT Brad Nailer is powered by an 18V Li-ion battery (NOT supplied). The compressed air (generated by piston action linked with DC motor) moves the driving guide. The mechanism provides less reaction force and air nailer like shot feeling to the operator. Its slim nose allows for better visibility for easy access to the point you aim at. Enables user to shoot nails into tight spaces. The rocker switch allows you to select between sequential and bump fire mode. It also features an LED job light for visibility in dark work areas. Comes as a Bare Unit, No Battery or Charger. Specification: Magazine Capacity: 110 BradsFires: 18 Ga Nails: Length: 15-50mmShots Per Battery Charge: 1,000Weight: 3.2kg

GBP 559.99
1

HR004GZ XGT 40Vmax Bl Rotary Hammer 40V Bare Unit

HR004GZ XGT 40Vmax Bl Rotary Hammer 40V Bare Unit

The Makita HR004G XGT 40Vmax Rotary Hammer utilises anti-vibration technology to provide maximum control and comfort. It offers 3 modes of operation: Rotary Only, Rotary Hammer, Hammer Only. The brushless motor offers increased efficiency, whilst the built-in constant speed control and torque limiter provide increased control. Variable speed is controlled by the trigger and it also offers forward/reverse rotation. A 'Soft No Load' function automatically reduces the motor speed during idling to suppress the vibration of the machine body. For added user safety there is an electric brake and soft start feature. It also features an LED job light, ideal when working in dark areas. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level. Specifications: Tool Holder: SDS Plus. Modes: Rotary Only, Rotary Hammer, Hammer Only. No Load Speed: 0-980/min. Blows per Minute: 0-5, 000/bpm. Impact Energy: 2.9 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm. The Makita HR004GZ XGT 40Vmax BL Rotary Hammer comes as a Bare Unit, NO battery or charger supplied. Technical Specs Tool Holder: SDS Plus. Modes: Rotary Only, Rotary Hammer, Hammer Only. No Load Speed: 0-980/min. Blows per Minute: 0-5, 000/bpm. Impact Energy: 2.9 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm.

GBP 659.99
1

HM1213C Demolition Hammer SDS Max 110V

HM1213C Demolition Hammer SDS Max 110V

Makita HM1213C 1500W SDS MAX Demolition Hammer with AVT complete with bull point, bit grease, side handle and carrying case The Makita HM1213C 110V is a highly durable demolition hammer with AVT (Anti Vibration Technology) , ensuring extra-low vibration performance. Suppression of motor speed during no-load reduces vibration of tool body. The Bit can be set at 12 positions for convenience and the 1500W motor delivers up to 1900 blows per minute. Sold in a large Carry Case with a Bull Point, Grease and Cloth. Features: D shaped side handle swivels 360 Degrees to your desired poistion. Also can be set at 8 different back and forth positions Easy to operate slide switch Rubberised soft grip provides more comfort and control Large carbon brush for extended life 12 Stage bit angle setttings Anti-vibration handle One touch sliding chuck for easy bit changes Variable speed trigger + variable speed control dial Constant speed under load Soft start for suppressing start-up reaction LED service light indicates when to replce carbon brush LED power light indicates problem with electric circuit Tri-Axial system - determining the vibration figure of the X, Y and Z axes - all vibration figures conform to EN60745 Comes with: Bull point Bit grease Side handle Carry case Specification: Impact energy: 18.6 J Blows per minute: 950 - 1900 bpm Input wattage: 1500 w Speed Control Variable by Dial: Yes Bit Angle Setting: 12 Stage Vibration: Chiselling: 7 m/sec_ Vibration K factor: 1.5 m/sec_ Noise sound pressure: 75 dB (A) Noise sound power: 95 dB (A) Noise K factor: 2.53 dB (A) Net weight: 9.9 kg

GBP 809.99
1

JN1601/2 - 1.60mm 550W Nibbler - 240V

JN1601/2 - 1.60mm 550W Nibbler - 240V

JN1601 - 550W 1.6mm Nibbler The Makita 1.6mm nibbler gives the operator clean and precise work in keystone plate, deck plate and other corrugated sheet materials. With a die rotation of 360 and a large 1/4" stroke, the ergonomic slim body design allows for easy gripping and is extremely light at only 1.5kgs which gives easy operator handling. Lock-on sliding switch for continuous use and a built-in thickness gauge for convenience, the nibbler allows for quick and easy punch and die replacement for less down time. Power input: 550W. Strokes per minute: 2,200spm. Max. cut capacities: mild steel 1.6mm, stainless 1.2mm. Min. cutting outside edge: 50mm. Radius inside edge: 45mm. Supplied with: punch and die set 3mm hex wrench and wrench holder, double insulated. Available in 240V and 110V.

GBP 539.99
1

JN1601/1 1.60mm 550W Nibbler 110V

JN1601/1 1.60mm 550W Nibbler 110V

JN1601 - 550W 1.6mm Nibbler The Makita 1.6mm nibbler gives the operator clean and precise work in keystone plate, deck plate and other corrugated sheet materials. With a die rotation of 360 and a large 1/4" stroke, the ergonomic slim body design allows for easy gripping and is extremely light at only 1.5kgs which gives easy operator handling. Lock-on sliding switch for continuous use and a built-in thickness gauge for convenience, the nibbler allows for quick and easy punch and die replacement for less down time. Power input: 550W. Strokes per minute: 2,200spm. Max. cut capacities: mild steel 1.6mm, stainless 1.2mm. Min. cutting outside edge: 50mm. Radius inside edge: 45mm. Supplied with: punch and die set 3mm hex wrench and wrench holder, double insulated. Available in 240V and 110V.

GBP 539.99
1

DBN600ZJ 18V Finishing Nailer 16G LXT - Body Only Version - No Batteries Or Charger Supplied

DBN600ZJ 18V Finishing Nailer 16G LXT - Body Only Version - No Batteries Or Charger Supplied

18V 16g 2nd fix finishing nailer designed for second fix carpenters, cabinet makers and joiners. The nailer takes 16 gauge 25 - 64mm straight brad nails. The magazine holds up to 110 brads at a time. Keep working for longer as the machine will fire up to 800 shots per battery charge (4.0Ah). The nail gun can be set to fire sequentially or in bump firing modes, selectable by an easily accessible rocker switch. LED job light makes it easier to work in low light levels. Features and Benefits: Driving depth adjustment by dial. Anti-dry fire mechanism. Sequential and bump firing modes selectable by rocker switch. Bumper protects work-piece from scratches and damage. LED job light. Tool-less nail jam clearing. Ergonomically designed grip. Window to check qty of remaining nails. For finishing applications

GBP 619.99
1

HR004GD201 XGT 40Vmax BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

HR004GD201 XGT 40Vmax BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

The Makita HR004G XGT 40Vmax Rotary Hammer utilises anti-vibration technology to provide maximum control and comfort. It offers 3 modes of operation: Rotary Only, Rotary Hammer, Hammer Only. The brushless motor offers increased efficiency, whilst the built-in constant speed control and torque limiter provide increased control. Variable speed is controlled by the trigger and it also offers forward/reverse rotation. A 'Soft No Load' function automatically reduces the motor speed during idling to suppress the vibration of the machine body. For added user safety there is an electric brake and soft start feature. It also features an LED job light, ideal when working in dark areas. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level. Specifications: Tool Holder: SDS Plus. Modes: Rotary Only, Rotary Hammer, Hammer Only. No Load Speed: 0-980/min. Blows per Minute: 0-5, 000/bpm. Impact Energy: 2.9 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm. The Makita HR004GD201 XGT 40Vmax BL Rotary Hammer is supplied with: 2 x 40V 2.5Ah XGT 40Vmax Li-ion Batteries. 1 x Quick Change Chuck. 1 x Depth Gauge. 1 x Grease Vessel Set. 1 x Cleaning Cloth. 1 x 36-40V DC40RA XGT Fast Charger. 1 x Type 4 MAKPAC Carry Case. Technical Specs Tool Holder: SDS Plus. Modes: Rotary Only, Rotary Hammer, Hammer Only. No Load Speed: 0-980/min. Blows per Minute: 0-5, 000/bpm. Impact Energy: 2.9 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm.

GBP 1499.99
1

HR003GD201 XGT 40Vmax Sds Plus BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

HR003GD201 XGT 40Vmax Sds Plus BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

The Makita HR003G XGT 40Vmax SDS Plus BL Rotary Hammer utilises anti-vibration technology to provide maximum control and comfort. It offers 3 modes of operation: Rotary Only, Rotary Hammer, Hammer Only. The brushless motor offers increased efficiency, whilst the built-in constant speed control and torque limiter provide increased control. Variable speed is controlled by the trigger and it also offers forward/reverse rotation. A 'Soft No Load' function automatically reduces the motor speed during idling to suppress the vibration of the machine body. For added user safety there is an electric brake and soft start feature. It also features an LED job light, ideal when working in dark areas. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level. Specifications: Tool Holder: SDS Plus. Modes: Rotary drilling, Hammer drilling or Chiseling. No Load Speed: 0-980/min. Blows per minute: 0-5, 000/bpm. Impact Energy: 2.8 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm. Wood 32mm. Weight: 3.9kg. The Makita HR003GD201 XGT 40Vmax SDS Plus BL Rotary Hammer is supplied with: 2 x 40V 2.5Ah XGT 40Vmax Li-ion Batteries. 1 x Depth Gauge. 1 x Grease Vessel for Bit 100ml. 1 x Cleaning Cloth. 1 x 36-40V DC40RA XGT Fast Charger. 1 x Type 4 MAKPAC Carry Case. Technical Specs Tool Holder: SDS Plus. Modes: Rotary drilling, Hammer drilling or Chiseling. No Load Speed: 0-980/min. Blows per minute: 0-5, 000/bpm. Impact Energy: 2.8 joules. Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm. Wood 32mm. Weight: 3.9kg.

GBP 1329.99
1

HM1203C SDS Max Demolition Hammer Drill (240V)

HM1203C SDS Max Demolition Hammer Drill (240V)

Makita HM1203C 1510W Demolition Hammer Drill complete with bull point, bit grease, side handle and carrying case The Makita HM1203C 240V gives the user high durability and excellent demolition performance. Adapted for SDS-MAX bits. Bit can be set at 12 positions for convenience. Sold in both 110V and 240V models. Features: One touch sliding chuck for easy bit installation and removal LED lamp indicates when to replace carbon brush. Double Insulation Variable speed Constant speed under load Soft start Comes with: Bull point Bit grease Side handle Carry case Specification: Impact energy: 19.1 J Blows per minute: 950 - 1900 bpm Input wattage: 1510 w Speed Control: Variable by Dial Bit Angle Setting: 12 Stage Vibration: Chiselling: 15.5 m/sec Vibration K factor: 1.5 m/sec Noise sound pressure: 81 dB(A) Noise sound power: 95 dB(A) Noise K factor: 2.19 dB(A) Net weight: 9.7 kg

GBP 699.99
1

Makita 6906 Impact Wrench 3/4" Square Drive (110V)

Makita 6906 Impact Wrench 3/4" Square Drive (110V)

Makita 6906 Impact Wrench 3/4 Inch Square Drive 110V with 32mm Socket, Wrench and all-metal Carry Case This Makita 6906 reversible 650 Watt Impact Wrench, with a No Load Speed of 1700 rpm, is easily up to the rigours of heavy-duty construction. Features of this model include precision gearing plus a ball and needle bearing construction for smooth and efficient power transmission. To keep all this torque under control the side handle adjusts 360 for operator convenience. Brushes are externally accessible for easy replacement. Features: 588Nm Max Fastening Torque Rocker type reversing switch for easy one handed forward or reverse operation Slide handle adjusts 360degrees for operation, convenience at any angle Externally accessible carbon brushes for easy maintenance Double insulated for added safety Comes with: Socket (32x56) Grip Assembly Carry case Specification: Bolt Range: M16-M22 Max Socket Size: 36mm A/F Max Torque: 588Nm Impacts per Minute: 1,600ipm No Load Speed: 1,700rpm Input wattage: 650w Net Weight: 5.0kg 110 volt

GBP 499.99
1

KP001GD201 XGT 40Vmax Planer 40V 2 x 2.5Ah Li-ion

KP001GD201 XGT 40Vmax Planer 40V 2 x 2.5Ah Li-ion

Makita KP001G XGT 40Vmax Planer with an electronically controlled brushless motor, to optimise battery energy use for longer run time per charge. A battery protection system automatically shuts off power when the battery level is low. Its compact design and good grip are made to reduce operator fatigue. The rubber coating on the handle ensures a firm working grip. Compatible with the Auto-Start Wireless System (AWS) , connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on. Supplied with: 2 x XGT 40Vmax 40V 2.5Ah Li-ion Batteries. 1 x DC40RA XGT 40Vmax Battery Charger. 1 x Blade Gauge Assembly 82mm. 1 x Guide Rule. 1 x Depth Gauge. 1 x Socket Wrench. 1 x Type 3 MAKPAC Case. Specifications: No Load Speed: 15, 000/min. Planing Depth: 0-4mm. Planing Width: 82mm. Max. Rebate Depth: 25mm. Weight: 2.5kg. Technical Specs No Load Speed: 15, 000/min. Planing Depth: 0-4mm Planing Width: 82mm Max. Rebate Depth: 25mm Weight: 2.5kg

GBP 1299.99
1