KERKMANN Office Shelf System - Without Rear Wall - Height 1900mm, Extension, Width X Depth 750x300mm
Office shelf system, without rear wall, shelf unit height 1900 mm, extension shelf unit, width x depth 750x300 mm. Supplied = flat pack. Colour of uprights = graphite black RAL 9011. Shelf unit height = 1900 mm. Shelf unit fittings = without rear panel. Finish = powder coated. Material = steel. Design = plug in. Shelf height adjustment increments = 60 mm. Overall depth = 340 mm. Overall width = 770 mm. Max. bay load = 1000 kg. Max. shelf load = 100 kg. Shelf colour = light grey RAL 7035. Shelf depth = 300 mm. Shelf width = 750 mm. High quality powder coating - cover panels and plinth in graphite black RAL 9011, shelves light grey RAL 7035. Extremely sturdy, with large capacity. Can be assembled in minutes due to modern plug-in system. Optimum use of space with corner shelf units. See Accessories for end side panels. Shelves with 40 mm raised edges for safety, height adjustable in increments of 60 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. External shelf unit dimensions Depth = shelf depth + 40 mm. Width (without corner shelf) = sum of shelf widths + 40 mm. Corner shelf width = shelf depth + 370 mm. The front width of the corner shelves is generally 505 mm. Available on request Shelf girders - to raise the max. shelf load by 40 kg per beam. Central stop - for utilising both sides of 600 mm deep shelves. Dividers - sliding, height 300 mm. Side connectors - for side shelf limit. Plastic labelling strips - with self-adhesive rear, film cover and white label strips. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.
