15 results (0,13461 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

DCGT 11T304-AS Insert Grade IC20

DCGT 11T304-AS Insert Grade IC20

DCGT turning inserts are 55 rhombic inserts featuring a 7 positive flank and a very positive rake angle and sharp cutting edge for machining aluminum. Features and Benefits Very positive rake angle and sharp cutting edge for effective cutting Carbide grade for added cutting toughness Uncoated ideal for semi-roughing, semi-finishing and finishing applications Typical Applications Turning Semi-roughing Semi-finishing Finishing Standards Grade : IC20 ISO Range - (M10-M25)(K10-K20)(H05-H15)(S05-S20)(N05-N25)

GBP 79.99
1

CNMG 120404-PP Insert Grade IC907

CNMG 120404-PP Insert Grade IC907

CNMG Turning Inserts grade IC907 designed for machining of heat resistant alloys, austenitic stainless steel and hard steel. Features and Benefits Double-sided negative (0) relief angle inserts offering a strong edge for general applications and varying depths of cut dependent on chipbreaker type A tough sub-micron substrate, suitable for low-to-medium cutting speeds Rake angle which is positive and varies along the edge to negative in order to prevent chipping Specially designed reduces cratering

GBP 73.99
1

CCMT 09T304-SM Insert Grade IC9350

CCMT 09T304-SM Insert Grade IC9350

CCMT turning inserts single-sided, 7 positive relief angle inserts for semi-finish and finish cutting. "M" tolerance edge condition for general applications. Chip breaking in moderate feed range. Positive rake, low cutting forces. Used for a wide range of materials, including non-ferrous and exotic alloys. Features and Benefits Tough substrate with a cobalt enriched layer for greater cutting strength Thick CVD TiCN+alpha Al2O3+TiN coating for high toughness and wear resistance Chipbreaker SM for finishing applications Typical Applications General use machining Steel Standards Insert Grade IC9250 ISO Range - (P10-P35)(M05-M20)

GBP 65.99
1

IDI 100-SG Chamdrill Insert Grade IC908

IDI 100-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 64.99
1

MM ECS-A4.00X10-2T06 Insert Grade IC908

MM ECS-A4.00X10-2T06 Insert Grade IC908

MM ECS MULTI-MASTER, centering drill (DIN 332), interchangeable solid carbide heads feature a hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. Features and Benefits Interchangeable for an excellent tooling solution Fine grain substrate with excellent chipping resistance for added durability TiAlN PVD coating for high wear and oxidation resistance Typical Applications Centre drilling Standards Grade: IC908 ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25)

GBP 59.99
1

IDI 123-SG Chamdrill Insert Grade IC908

IDI 123-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 79.99
1

CCMT 120408-SM Insert Grade IC907

CCMT 120408-SM Insert Grade IC907

CCMT turning inserts are 80 rhombic shaped inserts. with a single-sided, 7 positive relief angle for semi-finish and finish cutting. "M" tolerance edge condition for general with chip breaking in moderate feed range. Their positive rake and low cutting forces make them ideal for use on a wide range of materials, including non-ferrous and exotic alloys. Features and Benefits A tough sub-micron substrate for durability and performance Good cutting performance at low-to-medium cutting speeds Suitable for use on heat resistant alloys, austenitic stainless steel and hard steel Standards Insert Grade IC907

GBP 79.99
1

CCMT 060208-SM Insert Grade IC907

CCMT 060208-SM Insert Grade IC907

CCMT turning inserts are 80 rhombic shaped inserts. with a single-sided, 7 positive relief angle for semi-finish and finish cutting. "M" tolerance edge condition for general with chip breaking in moderate feed range. Their positive rake and low cutting forces make them ideal for use on a wide range of materials, including non-ferrous and exotic alloys. Features and Benefits A tough sub-micron substrate for durability and performance Good cutting performance at low-to-medium cutting speeds Suitable for use on heat resistant alloys, austenitic stainless steel and hard steel Standards Insert Grade IC907

GBP 49.99
1

T490 LNMT 0804PN-R Insert Grade IC830

T490 LNMT 0804PN-R Insert Grade IC830

T490 LNMT HELITANG Milling Inserts are tangentially clamped inserts with 4 helical cutting edges. The unique pocket design prevents insert pull-out and enables tools with larger core diameters compared with regular radially orientated inserts. Features and Benefits Tangentially clamped with 4 helical cutting edges Unique pocket design prevents insert pull-out Enables tools with larger core diameters High toughness and wear resistance Specifications Insert grade: IC830 ISO range P/M/K: (P20-P40)(M25-M35) ISO range H/S/N: (S15-S30) Coating type: PVD Coating layers: AlTiN+TiN Typical Applications Steel Stainless steel High temperature applications

GBP 69.99
1

IDI 120-SG Chamdrill Insert Grade IC908

IDI 120-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 79.99
1

IDI 130-SG Chamdrill Insert Grade IC908

IDI 130-SG Chamdrill Insert Grade IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions. Features and Benefits Durable hard substrate construction Excellent chipping resistance for general machining applications PVD TiAlN coating for excellent wear and oxidation resistance Specifications Grade: IC908 ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO range - H/S/N (H10-H20)(S10-S25) Grade or coating type: PVD Coating layers: TiAlN Typical Applications Drilling General purpose machining

GBP 79.99
1

APKT 160432R-HM Insert Grade IC328

APKT 160432R-HM Insert Grade IC328

APKT HM milling inserts feature thin PVD coated TiCN layer on a P45-K40 substrate for very high toughness. Ideal for milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. Features and Benefits P45-K40 substrate for very high toughness PVD coated TiCN layer for greater heat and wear resistance Suitable for low to medium cutting speeds and unstable machining conditions 2 helical cutting edges for general use applications Typical Applications Milling Steel Stainless steel Alloy steels Standards Insert Grade : IC328 ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30)

GBP 79.99
1

ADKT 150550R-HM Insert Grade IC328

ADKT 150550R-HM Insert Grade IC328

ADKT milling inserts features a tough substrate ideal for applications involving steel and stainless steel at low to medium cutting speeds and unstable machining conditions. The thin PVD TiCN coating helps provide excellent wear resistance and protection from heat build up, prolonging the tools lifespan. Features and Benefits Hard substrate for improved rigidity when machining PVD TiCN coating for improved heat and wear resistance Ideal for parting and grooving applications involving steel and stainless steel Specifications 85 Parallelogram Insert Insert Grade IC328 ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range -H/S/N/: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Typical Applications Milling Parting and Grooving

GBP 49.99
1

CNMG 120412-TF Insert Grade IC908

CNMG 120412-TF Insert Grade IC908

CNMG 80 Rhombic turning inserts are double-sided negative (0) relief angle inserts offering a strong edge for general applications and varying depths of cut dependent on chipbreaker type. The hard substrate construction allows for excellent chipping resistance and combined with the TiAlN PVD coating provides high wear and oxidation resistance. Features and Benefits Hard substrate construction for improved rigidity and stability when machining TiAlN PVD coating for improved wear and oxidation resistance Ideal for use on a wide range of materials Specifications Insert Grade IC908 ISO Range - (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) Coating: PVD TiAlN Hard substrate consruction Chipbreaker: TF Application: Medium Typical Applications Turning Steel Stainless steel Cast iron

GBP 73.99
1