90 results (0,18922 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap) 10 Pack

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 839.99
1

HMT VersaDrive 90 DrillSink 12mm Drill Bit x 20.5mm Countersink (M10) 10 Pack

HMT VersaDrive 90 DrillSink 12mm Drill Bit x 20.5mm Countersink (M10) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 799.99
1

HMT VersaDrive 90 DrillSink 11 Drill x 20.5mm (M10) 10 Pack

HMT VersaDrive 90 DrillSink 11 Drill x 20.5mm (M10) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 749.99
1

HMT VersaDrive 90 DrillSink 10mm Drill Bit x 16.5mm Countersink (M8) 10 Pack

HMT VersaDrive 90 DrillSink 10mm Drill Bit x 16.5mm Countersink (M8) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 749.99
1

HMT VersaDrive 90 DrillSink 8.5 Drill x 20.5mm (M10 Tap) 10 Pack

HMT VersaDrive 90 DrillSink 8.5 Drill x 20.5mm (M10 Tap) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 699.99
1

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12) 10 Pack

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 899.99
1

HMT VersaDrive 90 DrillSink 6.8mm Drill Bit x 16.5mm Countersink (M8) 10 Pack

HMT VersaDrive 90 DrillSink 6.8mm Drill Bit x 16.5mm Countersink (M8) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 559.99
1

HMT VersaDrive 90 DrillSink 8mm Drill Bit x 12.4mm Countersink (M6) 10 Pack

HMT VersaDrive 90 DrillSink 8mm Drill Bit x 12.4mm Countersink (M6) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 529.99
1

HMT VersaDrive 90 DrillSink 14 Drill x 25mm Countersink (M12) 10 Pack

HMT VersaDrive 90 DrillSink 14 Drill x 25mm Countersink (M12) 10 Pack

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 929.99
1

HMT VersaDrive TCT HoleCutter Extra Long Series Set, 14, 18, 20, 22, 24, 26mm + Pilots

HMT VersaDrive TCT HoleCutter Extra Long Series Set, 14, 18, 20, 22, 24, 26mm + Pilots

Extra Long reach version of the popular VersaDrive HoleCutter. Perfect for small diameter drilling through steelwork using a pistol drill where a separate extension isn't practical. Ideal for applications where a metal plate is encountered amongst wood joists or where both sides of a steel beam require drilling. These are rapidly becoming the go-to, alternative solution for fabricators and steel erectors needing to drill through heavy steel in locations and on projects where a rotary drill is more convenient and possibly safer than a Magnetic drill.

GBP 659.99
1

HMT VersaDrive Impact Reamer Set - 9/16, 11/16, 13/16, 15/16, 1-1/16

HMT VersaDrive Impact Reamer Set - 9/16, 11/16, 13/16, 15/16, 1-1/16

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing. Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact Wrench providing ultimate cutting performance with virtually no powertool kickback. VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 709.99
1

HMT VersaDrive Impact Reamer InsertFoam Set - 8, 10, 12, 14, 16, 18mm

HMT VersaDrive Impact Reamer InsertFoam Set - 8, 10, 12, 14, 16, 18mm

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing. Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact Wrench providing ultimate cutting performance with virtually no powertool kickback. VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 499.99
1

HMT VersaDrive Impact Reamer InsertFoam Set - 18, 20, 21, 22, 24, 26mm

HMT VersaDrive Impact Reamer InsertFoam Set - 18, 20, 21, 22, 24, 26mm

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing. Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact Wrench providing ultimate cutting performance with virtually no powertool kickback. VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 899.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap 1/2-13 UNC 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap 1/2-13 UNC 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 549.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap M10 x 1.5mm 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap M10 x 1.5mm 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 499.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap 5/16-18 UNC 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap 5/16-18 UNC 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 439.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap 3/8-16 UNC 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap 3/8-16 UNC 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 519.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap M12 x 1.75mm 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap M12 x 1.75mm 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 499.99
1

HMT VersaDrive Spiral Flute ImpactaTap M12 x 1.75mm 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap M12 x 1.75mm 10 Pack

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 899.99
1

HMT VersaDrive Spiral Flute ImpactaTap M20 x 2.5mm 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap M20 x 2.5mm 10 Pack

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 1249.99
1

HMT VersaDrive Spiral Flute ImpactaTap M8 x 1.25mm 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap M8 x 1.25mm 10 Pack

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 499.99
1

HMT VersaDrive Spiral Flute ImpactaTap M24 x 3.0mm 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap M24 x 3.0mm 10 Pack

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 1729.99
1

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

HMT VersaDrive Spiral Flute ImpactaTap Set, M12, M16, M20, M24

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 439.99
1

HMT VersaDrive Spiral Flute ImpactaTap M16 x 2.0mm 10 Pack

HMT VersaDrive Spiral Flute ImpactaTap M16 x 2.0mm 10 Pack

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 999.99
1