9 results (0,39979 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Fireco 943-3945 Dorgard SmartSound Door Holder in White

Fireco 943-3945 Dorgard SmartSound Door Holder in White

Fireco Dorgard SmartSound Door Holder in WhiteDorgard SmartSound is a wireless solution for legally holding open fire doors automatically releasing them to close when a fire alarm sounds. SmartSound technology means the door units are not triggered by the noise of a vacuum cleaner.When a fire alarm rings the Dorgard device recognises the sound then automatically releases the door thus allowing it to close and rapidly prevent the spread of the fire.The Dorgard SmartSound has all of the popular features of the standard Dorgard model but with the intelligent SmartSound noise filtering system.SmartSound BenefitsNew SmartSound technology not triggered by vacuum cleanersCan be fitted to any doorThree-year battery lifeThree-year warrantyNo programming just fit and forgetCarpet friendly leaves no marksInstalled in under five minutesSmartSound Key FeaturesWireless technology battery poweredFire doors can be held open at any angleResponds when alarm is activatedAs soon as alarm is activated the plunger is released and the door will closeWorks with heavy fire doors up to 160kg and 1600mm widthThree-year battery lifeThree-year manufacturers warrantyAnti-drag technology carpet friendlySmartSound audio filtering wont be triggered by background noiseSimple LED status lightsAvailable in black or white

GBP 130.91
1

Fireco 728-7133 Dorgard SmartSound Door Holder in Black

Fireco 728-7133 Dorgard SmartSound Door Holder in Black

Fireco 728-7133 Dorgard SmartSound Door Holder in BlackThe Dorgard SmartSound designed by Fireco is an innovative wireless fire door retainer device that allows you to hold open fire doors in a completely legal quick and simple way.When a fire alarm rings the Dorgard device recognises the sound then automatically releases the door thus allowing it to close and rapidly prevent the spread of the fire.The Dorgard SmartSound has all of the popular features of the standard Dorgard model but with the intelligent SmartSound noise filtering system.SmartSound BenefitsNew SmartSound technology not triggered by vacuum cleanersCan be fitted to any doorThree-year battery lifeThree-year warrantyNo programming just fit and forgetCarpet friendly leaves no marksInstalled in under five minutesSmartSound Key FeaturesWireless technology battery poweredFire doors can be held open at any angleResponds when alarm is activatedAs soon as alarm is activated the plunger is released and the door will closeWorks with heavy fire doors up to 160kg and 1600mm widthThree-year battery lifeThree-year manufacturers warrantyAnti-drag technology carpet friendlySmartSound audio filtering wont be triggered by background noiseSimple LED status lightsAvailable in black or white

GBP 130.91
1

Fireco 408-1075 Freedor Pro - Black Finish

Fireco 408-1075 Freedor Pro - Black Finish

Fireco 408-1075 Freedor Pro - Black FinishFreedor Pro takes the weight out of heavy fire doors and allows you to place them open at any angle with its free-swing feature. Freedor Pro is controlled by radio signal from ProHub meaning that in the event of a fire Freedor Pro will allow the doors to close preventing the spread of smoke and fire.Key FeaturesSuitable for high-risk zones including corridors kitchens and stairwellsImproves access for those with mobility issuesKeep fire doors open at any angle

GBP 333.31
1

Fireco 286-7462 Dorgard Fire Door Retainer Red

Fireco 286-7462 Dorgard Fire Door Retainer Red

Fireco 286-7462 Dorgard Fire Door Retainer RedOnce installed Dorgard works by listening out for a continuous sound of 65 decibels or higher. Once this sound has been identified after approximately 14 seconds Dorgard will release the fire door and under the pressure of the overhead door closer the door will close sealing the area and preventing the spread of smoke and fire.As Dorgard is wire free it requires no wiring into the buildings main fire alarm system meaning that disruption during installation is minimal and fast.When Dorgard is holding a fire door open it listens for the continuous sound of a fire alarm. Dorgard needs to hear a fire alarm that exceeds 65 decibels for longer than 14 seconds. At a general noise level of 80 decibels Dorgard will release. This facility has been built into the unit as a safety feature. Should the noise level in your premises exceed 80 decibels it is unlikely that you would hear a 65 decibel alarm therefore the Dorgard releases the fire door to close.Key FeaturesOverall height 205mmMain casing height 150mmWidth 195mmDepth 45mmPacked kit weight 950gProduct only including batteries 700gCasing ABSPower 2 x 1.5v C size alkaline batteries do not use rechargeable batteriesExpected battery life 12 monthsTrigger by alarms compliant with BS 5839-3Improves access in premises in line with the Equality Act 2010Complies with BS EN 1155 and accepted by the Fire Rescue ServiceAutomatic night-time release facilityAvailable in a variety of colours and finishesSuitable for building with an automatic fire detection systemIdeal for offices care homes schools and hotelsInstallingInstalling Dorgard takes only a few minutes. It is completely wire free and battery operated.Firstly open the top compartment of Dorgard using a screwdriver and install the batteries. The 2 C sized batteries supplied should last for at least 12 months.It is recommended that fire doors are closed at night therefore Dorgard has an automatic night-time release facility. To enable this select the night time dip switches on the back of the unit. Also note the serial number in the Maintenance Record supplied in the Fitting Operating guide.With the door closed position the fitting template provided against the door on the side that shuts against the frame. Mark the holes for fixing through the fitting template.Fix Dorgard to the fire door using the four screws supplied. The correct position is when with the plunger fully retracted the door can swing free and with the Dorgard plunger depressed contact with the floor or floor plate holds the door open.Twelve hours after install and every 7 days after this point Dorgard will self-test. Should Dorgard detect an internal fault it will sound a warning tone and fail-to-safe closing the door.Next fix the floor plate in a position that is in line with Dorgard.Before drilling holes or fastening screws check the location of water pipes electrical points and gas pipes.Open the fire door to the desired position stand sideways to the fire door and press down on the plunger to hold the fire door open. To release the door kick the black knob.Test your fire alarm to ensure that Dorgard releases the door. Finally fix the fire door sticker.

GBP 107.34
1

Fireco 338-7715 Dorgard Fire Door Retainer White

Fireco 338-7715 Dorgard Fire Door Retainer White

Fireco 338-7715 Dorgard Fire Door Retainer WhiteOnce installed Dorgard works by listening out for a continuous sound of 65 decibels or higher. Once this sound has been identified after approximately 14 seconds Dorgard will release the fire door and under the pressure of the overhead door closer the door will close sealing the area and preventing the spread of smoke and fire.As Dorgard is wire free it requires no wiring into the buildings main fire alarm system meaning that disruption during installation is minimal and fast.When Dorgard is holding a fire door open it listens for the continuous sound of a fire alarm. Dorgard needs to hear a fire alarm that exceeds 65 decibels for longer than 14 seconds. At a general noise level of 80 decibels Dorgard will release. This facility has been built into the unit as a safety feature. Should the noise level in your premises exceed 80 decibels it is unlikely that you would hear a 65 decibel alarm therefore the Dorgard releases the fire door to close.Key FeaturesOverall height 205mmMain casing height 150mmWidth 195mmDepth 45mmPacked kit weight 950gProduct only including batteries 700gCasing ABSPower 2 x 1.5v C size alkaline batteries do not use rechargeable batteriesExpected battery life 12 monthsTrigger by alarms compliant with BS 5839-3Improves access in premises in line with the Equality Act 2010Complies with BS EN 1155 and accepted by the Fire Rescue ServiceAutomatic night-time release facilityAvailable in a variety of colours and finishesSuitable for building with an automatic fire detection systemIdeal for offices care homes schools and hotelsInstallingInstalling Dorgard takes only a few minutes. It is completely wire free and battery operated.Firstly open the top compartment of Dorgard using a screwdriver and install the batteries. The 2 C sized batteries supplied should last for at least 12 months.It is recommended that fire doors are closed at night therefore Dorgard has an automatic night-time release facility. To enable this select the night time dip switches on the back of the unit. Also note the serial number in the Maintenance Record supplied in the Fitting Operating guide.With the door closed position the fitting template provided against the door on the side that shuts against the frame. Mark the holes for fixing through the fitting template.Fix Dorgard to the fire door using the four screws supplied. The correct position is when with the plunger fully retracted the door can swing free and with the Dorgard plunger depressed contact with the floor or floor plate holds the door open.Twelve hours after install and every 7 days after this point Dorgard will self-test. Should Dorgard detect an internal fault it will sound a warning tone and fail-to-safe closing the door.Next fix the floor plate in a position that is in line with Dorgard.Before drilling holes or fastening screws check the location of water pipes electrical points and gas pipes.Open the fire door to the desired position stand sideways to the fire door and press down on the plunger to hold the fire door open. To release the door kick the black knob.Test your fire alarm to ensure that Dorgard releases the door. Finally fix the fire door sticker.

GBP 110.24
1

Fireco 478-5513 Dorgard Fire Door Retainer Black

Fireco 478-5513 Dorgard Fire Door Retainer Black

Fireco 478-5513 Dorgard Fire Door Retainer BlackOnce installed Dorgard works by listening out for a continuous sound of 65 decibels or higher. Once this sound has been identified after approximately 14 seconds Dorgard will release the fire door and under the pressure of the overhead door closer the door will close sealing the area and preventing the spread of smoke and fire.As Dorgard is wire free it requires no wiring into the buildings main fire alarm system meaning that disruption during installation is minimal and fast.When Dorgard is holding a fire door open it listens for the continuous sound of a fire alarm. Dorgard needs to hear a fire alarm that exceeds 65 decibels for longer than 14 seconds. At a general noise level of 80 decibels Dorgard will release. This facility has been built into the unit as a safety feature. Should the noise level in your premises exceed 80 decibels it is unlikely that you would hear a 65 decibel alarm therefore the Dorgard releases the fire door to close.Key FeaturesOverall height 205mmMain casing height 150mmWidth 195mmDepth 45mmPacked kit weight 950gProduct only including batteries 700gCasing ABSPower 2 x 1.5v C size alkaline batteries do not use rechargeable batteriesExpected battery life 12 monthsTrigger by alarms compliant with BS 5839-3Improves access in premises in line with the Equality Act 2010Complies with BS EN 1155 and accepted by the Fire Rescue ServiceAutomatic night-time release facilityAvailable in a variety of colours and finishesSuitable for building with an automatic fire detection systemIdeal for offices care homes schools and hotelsInstallingInstalling Dorgard takes only a few minutes. It is completely wire free and battery operated.Firstly open the top compartment of Dorgard using a screwdriver and install the batteries. The 2 C sized batteries supplied should last for at least 12 months.It is recommended that fire doors are closed at night therefore Dorgard has an automatic night-time release facility. To enable this select the night time dip switches on the back of the unit. Also note the serial number in the Maintenance Record supplied in the Fitting Operating guide.With the door closed position the fitting template provided against the door on the side that shuts against the frame. Mark the holes for fixing through the fitting template.Fix Dorgard to the fire door using the four screws supplied. The correct position is when with the plunger fully retracted the door can swing free and with the Dorgard plunger depressed contact with the floor or floor plate holds the door open.Twelve hours after install and every 7 days after this point Dorgard will self-test. Should Dorgard detect an internal fault it will sound a warning tone and fail-to-safe closing the door.Next fix the floor plate in a position that is in line with Dorgard.Before drilling holes or fastening screws check the location of water pipes electrical points and gas pipes.Open the fire door to the desired position stand sideways to the fire door and press down on the plunger to hold the fire door open. To release the door kick the black knob.Test your fire alarm to ensure that Dorgard releases the door. Finally fix the fire door sticker.

GBP 110.24
1