Raizer 2 Emergency Lifting Chair
The Raizer 2 Emergency Lifting Chair is a battery-operated chair that is designed to help a fallen person up to an almost standing position in just a few minutes. This Emergency Lifting Chair is perfect for use in home care, institutions, rescue services and other services requiring a lifting aid and transfer of persons with limited mobility. Ideal for single-carer use it requires only limited physical effort from the operator aside from a helping hand, therefore helping to reduce the strain and effort to minimise the risk of injury. A person who has fallen and cannot get up again is lifted up comfortably to a sitting or almost standing position in a way that supports the entire body throughout the process. The Raizer II can be quickly and easily assembled under a fallen person, and a push of a button on the remote control or the control panel on the side of the seat initiates the lifting process. This, therefore, means that the assistant does not have to carry out a lift and is exposed to no strain on the back or shoulders. All the materials of the Raizer 2 have been carefully selected with special attention to stability and durability and considering both the helper and the fallen person. Raizer II is fitted with safety belts that are to be attached to both backrests to make sure that the fallen person feels safe, secure and comfortable throughout the whole lifting process. When not in use and to allow for easy storage and transportation, the Raizer 2 Emergency Lifting Chair is disassembled and can be carried in two bags (supplied); backrests and legs are carried in a bag with ergonomic carrying straps for hand or back (long strap for shoulders or two straps as a backpack). The motor unit/seat is carried separately in a protective cover with a soft handle ergonomically designed to make sure that it is carried close to the body. Features and Benefits: Battery-operated Emergency Lifting Chair Perfect for all home care and professional care environments Suitable for use by just one person Designed to lift a fallen patient up from the floor Reduce the strain and risk of injury for a carer Incredibly easy to assemble and disassemble Exceptionally durable and robust Lightweight, easy to store and transport Supplied with carry bags Specifications: Battery: LiFePo4, 12V, 5AH Number of lifts on full charge: 40 with a max. load. Approx. 80 with an average load Duty cycle: 1 min. / 5 min. Charging time: Up to 6 hours with the provided charger Charging of depleted battery: 10–15 min. = 1 lift Lifting time: 20-30 seconds Noise level: < 70 dB A Dust and water IP 52 (protected from limited dust ingress; protected from water spray) Dimensions (L x W x H) standing: 655mm x 688m x 1225mm (25.8" x 27.1" x 48.2") Dimensions (L x W x H) lying: 1321mm x 688mm x 277mm (52" x 27.1" x 10.9") Motor unit/seat weight: 9.2 kgs (20.3 lbs) Backrest and legs weight: 4.9 kgs (10.8 lbs) Total weight: 14.1 kgs (31.1 lbs) Maximum lifting capacity: 150 kgs (23.6 stone) The Raizer 2 Emergency Lifting Chair meets the relevant requirements in the following standards: EN/ISO 10535:2007 Hoists for the transfer of disabled persons. Confirmed by Danish Technological Institute, certificate no. 222 EN 12182:2012 Assistive products for persons with disability - General requirements and test methods EN 60601-1:2006+Corr-1,-2:2008 +AC, A1:2013 Medical electrical equipment – Part 1 EN 60601-1-11:2015 Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
