Black Smooth Soffit H Trim - 5mtr

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwo...

Fascia Corner Trim - 300mm Black Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two UPVC fascia boards. These joints are 300mm in length and will acc...

Black Smooth Soffit F Trim - 5mtr

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is...

Black Smooth Soffit J Trim - 5mtr

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed ...

Fascia Joint Trim - 300mm Black Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two PVC fascia boards. These joints are 300mm in length and will acco...

Black Ash Hollow Soffit J Trim - 5mtr

Hollow soffit J trim is used at the back of the soffit to hide cut edges and hold the soffit in position.

Black Smooth Soffit External Corner Trim - 5mtr

Hollow soffit external corners are used when you want to run the soffit around an external corner.Freefoamand#039;s hollow soffit external corners are...

Fascia Internal Corner Trim - 300mm Black Smooth

Freefoamand#039;s square replacement internal corner is 300mm in length and will accommodate black fascia boards of any width. The internal corners ar...

Fibre Cement Cladding Aluminium Vertical Trim - 3mtr Black

This profile can be used for the seamless connection of panels and can be used both vertically and horizontally.There must be a minimum of 5mm clearan...

Fascia Double End Joint Trim - 600mm Black Smooth

Replacement fascia double-ended joints, or fascia joiners, are used to cover the expansion gap that should be left between two UPVC fascia boards.Thes...

Black Ash Woodgrain Hollow Soffit H Trim - 5mtr

Hollow soffit H trim is used to join two lengths of soffit when they are being installed lengthways rather than in short sections.It is also used in b...

PVC Quadrant Trim - 19mm x 5mtr Black Smooth

Our black smooth PVC quadrant is 19mm wide and is supplied in a 5mtr length.Quadrants are used to bridge a gap in any corner position. They can be fix...

Foresta Wood Effect Cladding Starter Trim - 3mtr Black

The Cladding Starter Trim gives a solid base from which to begin the installation, with the first length of cladding slotting directly into the purpos...

Laminate Wall Panel 10mm H Trim - 2420mm Black

These trims are used to joint two 11mm thick laminate wall panels together in a straight line.

Fascia Double Ended Corner Trim - 600mm Black Smooth

Freefoamand#039;s replacement fascia double-ended corners are supplied in 600mm lengths.Double-ended corners are used to cover the expansion gap betwe...

Laminate Wall Panel 10mm End Cap Trim - 2420mm Black

These trims are used to cap off the edge of a laminate wall panel and provide an aesthetically pleasing finish.

FloPlast Shiplap Cladding Drip Trim - 5mtr Black Ash Woodgrain

The Cladding Drip Trim will usually be used above a door or window head to deflect any running water away from the opening which can be useful during ...

Laminate Wall Panel 10mm External Corner Trim - 2420mm Black

These trims are used to joint two 11mm thick laminate wall panels together at an external corner.

FloPlast Shiplap Cladding Starter Trim - 5mtr Black Ash Woodgrain

The Cladding Starter Trim gives a solid base from which to begin the installation, with the first length of cladding slotting directly into the purpos...

Fascia Internal Corner Trim - 135 Degree 300mm Black Smooth

Replacement fascia corner trims are used to cover the straight joints of two plastic fascia boards when they meet at an angle, with this trim in parti...

Fascia External Corner Trim - 135 Degree 300mm Black Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two PVC fascia boards.These joints are 300mm in length and will accom...

Laminate Wall Panel 10mm Internal Corner Trim - 2420mm Black

These trims are used to joint two 11mm thick laminate wall panels together at an internal corner.

PVC D Section Trim - 28mm x 5mtr Black Smooth

One of the most commonly used window trims, our black smooth D section is 28mm wide and features two rounded edges.D trims can be fixed in position us...

Easyverge U Universal Verge System - Grey

Standard Composite Panel Cladding J Trim - 3.6m x 40mm Black

This black J trim is used to create a clean edge to composite panel cladding boards, providing an aesthetically pleasing finish.

FloPlast Shiplap Cladding Centre Joint Trim - 5mtr Black Ash Woodgrain

The Cladding Centre Joint Trim should be used when joining the ends of two cladding panels together in a straight line.This trim is 5 metres in length...

Aluminium Soffit J Trim - 40mm x 20mm x 3mtr Black

J trims are installed at the back of the aluminium soffit boards and are used to hide any unisghtly edges as well as hold the soffit in position.

Standard Composite Panel Cladding H Trim - 3.6m x 50mm Black

This black H trim is used to join two composite panel cladding panels together in a straight line.

Wetwall Bathroom Alloy Panel 4mm H Trim - 2440mm Matt Black

The H-Section in matt black colour is an essential joining profile, allowing for a smooth, gap-free connection between two Wetwall Alloy panels. Its s...

Easyverge U Universal Verge System - Black

Easyverge U Universal Verge System - Brown

GRP Trim Adhesive - 300ml

A one component, moisture curing, paintable, high modulus polyurethane sealant and adhesive. To be used in interior and exterior waterproof joints in ...

Gutter Trim Internal Corner

Both the gutter andamp; check kerb have internal corners in black. These components make the detailing of roof perimeters fast and easy, saving the ne...

Gutter Trim External Corner

Both the gutter andamp; check kerb have external corner details in black. These components make the detailing of roof perimeters fast and easy without...

Compact Composite Wall Panel 4mm H Joint Trim - 2440mm Black Tile

Enhance the finish of your compact wall panels with the H joint trim in black colour. Designed to provide a clean, seamless edge, this durable trim pr...

Internal Wall Panel End U Trim - 2400mm Black - For 10mm Panels

U trims are used to cap off the edge of an internal wall cladding panel and provide an aesthetically pleasing finish.

Black Ash Woodgrain Fascia Double End Joint Trim - 600mm x 47mm

Joint covers are used to hide the 10mm expansion gap that should be left between two plastic fascia boards.To enable the system to expand and contract...

FloPlast Shiplap Cladding Two Part Top Edge Trim - 5mtr Black Ash Woodgrain

When fixing your cladding beneath a soffit or window ledge youand#039;ll need a two part top edge trim.As the last board is usually a tight fit and of...

PVC Check Kerb Trim - 2.5mtr

Fast and easy to install with pre-applied water seal, SureEdge trims are solid cored for strength, removing the need andamp; cost of additional caps u...

Weatherboard Cladding Starter Trim - Universal

The Weatherboard Cladding Starter trim is used for all installations as it is hidden by the cladding - it can therefore be used in conjunction with We...

PVC Standard Gutter Trim - 2.5mtr

Fast and easy to install with pre-applied water seal on clamping trim, the two part drip edge trim securely clamps the membrane by mechanically fixing...

Wall Trim - 25mm x 100mm

Wall trims offer an economical alternative to lead and are not susceptible to theft. Featuring a 100mm face with 25mm return into the wall, fixed into...

Sulcado Slat Wall Panel Trim - 42mm x 2600mm x 12mm Left Hand Trim Charcoal

The Left Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint ens...

Sulcado Slat Wall Panel Trim - 26.5mm x 2600mm x 12mm Right Hand Trim Charcoal

The Right Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint en...

Sulcado Slat Wall Panel Trim - 42mm x 2600mm x 12mm Left Hand Trim French Oak

The Left Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint ens...

Sulcado Slat Wall Panel Trim - 26.5mm x 2600mm x 12mm Right Hand Trim French Oak

The Right Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint en...

Sulcado Slat Wall Panel Trim - 42mm x 2600mm x 12mm Left Hand Trim Natural Oak

The Left Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint ens...

Sulcado Slat Wall Panel Trim - 26.5mm x 2600mm x 12mm Right Hand Trim Grey Oak

The Right Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint en...

Sulcado Slat Wall Panel Trim - 26.5mm x 2600mm x 12mm Right Hand Trim Natural Oak

The Right Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint en...

Sulcado Slat Wall Panel Trim - 42mm x 2600mm x 12mm Left Hand Trim Grey Oak

The Left Hand Trim seamlessly blends with our Sulcado Slatwall Panels, creating a cohesive and visually appealing wall surface. Its half-lap joint ens...

White Hollow Soffit J Trim - 5mtr

Hollow soffit J trim is used at the back of the soffit to hide cut edges and hold the soffit in position.

Golden Oak Soffit Joint Trim - 5mtr

This trim is used to cover the joint between two lengths of soffit where the two ends meet.It is also used as a corner trim where two lengths of soffi...

Internal Wall Panel Rigid Angle Trim - 2400mm Black - For 10mm Bathroom/ Kitchen/ Ceiling Panels

Black angle trims are used to join two wall panels together at a right angle connection.Please Note: Image is for illustrative purposes only, actual t...

Rosewood Hollow Soffit J Trim - 5mtr

Hollow soffit J trim is used at the back of the soffit to hide cut edges and hold the soffit in position.

White Woodgrain Fascia Joint Trim - 300mm

Replacement fascia joints are used to cover the straight joints in the middle of two plastic fascia boards. These joints are 300mm in length.

Rosewood Hollow Soffit H Trim - 5mtr

Hollow soffit H trim is used to join two lengths of soffit when they are being installed lengthways rather than in short sections.It is also used in b...

Internal Wall Panel Rigid Angle Trim - 2600mm Black - For 8mm Bathroom/ Kitchen/ Ceiling Panels

Black angle trims are used to join two wall panels together at a right angle connection.Please Note: Image is for illustrative purposes only, actual t...

White Woodgrain Soffit J Trim - 5mtr

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed ...

White Woodgrain Soffit H Trim - 5mtr

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwo...

White Hollow Soffit H Trim - 5mtr

Hollow soffit H trim is used to join two lengths of soffit when they are being installed lengthways rather than in short sections.It is also used in b...

White Woodgrain Fascia Corner Trim - 300mm

Replacement fascia corner trims are used to cover the straight joints of two UPVC fascia boards when they meet at a 90 degree angle. These joints are ...

Dark Grey Smooth Soffit J Trim - 5mtr

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed ...

Plastic Headed Nails - 65mm Black - Box of 100

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure...

Plastic Headed Pins - 40mm Black - Box of 250

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure...

Storm Grey Smooth Soffit J Trim - 5mtr

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed ...

Plastic Headed Pins - 30mm Black - Box of 250

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure...

Plastic Headed Nails - 50mm Black - Box of 100

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure...

Internal Wall Panel Internal Corner Trim - 2400mm Black - For 10mm Bathroom/ Kitchen/ Ceiling Panels

This black trim is used for joining two 10mm thick wall panels together at an internal corner.Please Note: Image is for illustrative purposes only, ac...

Internal Wall Panel External Corner Trim - 2400mm Black - For 10mm Bathroom/ Kitchen/ Ceiling Panels

This black trim is used for joining two 8mm thick wall panels together at an external corner.Please Note: Image is for illustrative purposes only, act...

PolyX Rafter Bar Edge Trim - 3mtr Brown

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

Storm Grey Smooth Fascia Corner Trim - 300mm

Replacement fascia joints are used to cover the straight joints in the middle of two plastic fascia boards.These joints are 300mm in length and are co...

Composite Panel Cladding Reveal Trim - 3.6mtr Midnight

Our Composite Panel Cladding reveal Trim in Midnight can be used around windows, doors, as a starter trim when laying vertically and at the end of cla...

PolyX Rafter Bar Edge Trim - 3mtr White

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

Golden Oak Hollow Soffit J Trim - 5mtr

Hollow soffit J trim is used at the back of the soffit to hide cut edges and hold the soffit in position.

PolyX Rafter Bar Edge Trim - 6mtr White

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

FloPlast Shiplap Cladding Drip Trim - 5mtr Rosewood

The Cladding Drip Trim will usually be used above a door or window head to deflect any running water away from the opening which can be useful during ...

PolyX Rafter Bar Edge Trim - 2.5mtr Brown

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

Aluminium Cladding Starter Trim - 2825mm Natural Oak

Our aluminium cladding starter trim is manufactured by Knotwood, a leading manufacturer of aluminium building products worldwide. The trim is compatib...

Composite Slatted Cladding Corner Trim - 3.6mtr Argent

Corner trims are used in an external cladding application in order to create an aesthetically pleasing corner on an internal or external corner of a p...

Composite Slatted Cladding End Trim - 3.6mtr Midnight

Composite cladding end trims are the solution to neatly fitting cladding around doors and windows and creating a break in a cladding run. The midnight...

Chartwell Green Woodgrain Fascia Joint Trim - 300mm

Replacement fascia joints are used to cover the straight joints in the middle of two plastic fascia boards. These joints are 300mm in length and will ...

PolyX Lean to Flashing Trim - 6mtr Brown

The PolyX Lean to Flashing Trim is used in conjunction with the Rafter Bar Bridging section to ensure a good fit between the flashing and polycarbonat...

PolyX Rafter Bar Edge Trim - 5mtr Brown

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

Composite Panel Cladding F Trim - 3.6mtr Midnight

F trims are the solution to neatly fitting cladding around doors and windows and creating a break in a cladding run. The midnight finish is the darkes...

Storm Grey Smooth Soffit F Trim - 5mtr

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is...

Fascia Joint Trim - 300mm Anthracite Grey Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two plastic fascia boards.These joints are 300mm in length and will a...

Composite Panel Cladding Joint Trim - 3.6mtr Flint

In an external cladding application, joint trims are used to connect two cladding panels together in a straight line by joining them at the ends. The ...

PolyX Rafter Bar Edge Trim - 4mtr White

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

PolyX Lean to Flashing Trim - 3mtr Brown

The PolyX Lean to Flashing Trim is used in conjunction with the Rafter Bar Bridging section to ensure a good fit between the flashing and polycarbonat...

Composite Slatted Cladding Corner Trim - 3.6mtr Midnight

Corner trims are used in an external cladding application in order to create an aesthetically pleasing corner on an internal or external corner of a p...

Composite Panel Cladding Reveal Trim - 3.6mtr Flint

Our Composite Panel Cladding reveal Trim in Flint can be used around windows, doors, as a starter trim when laying vertically and at the end of claddi...

Storm Grey Smooth Fascia Joint Trim - 300mm

Replacement fascia joints are used to cover the straight joints in the middle of two plastic fascia boards. These joints are 300mm in length and are c...

Weatherboard Cladding Universal Edge Trim - 3mtr White

The Weatherboard Cladding Universal Edge Trim is a one-piece channel used at the edges of cladding installations to hide any cut edges of boards and s...

Aluminium Cladding Starter Trim - 5650mm Queensland Walnut

Our aluminium cladding starter trim is manufactured by Knotwood, a leading manufacturer of aluminium building products worldwide. The trim is compatib...

PolyX Rafter Bar Edge Trim - 2mtr Brown

The PolyX Rafter Bar Edge Trim sits into a standard timber supported PolyX Rafter Bar, used to neatly finish at the end of the installation.The PolyX ...

Composite Slatted Cladding End Trim - 3.6mtr Argent

Composite cladding end trims are the solution to neatly fitting cladding around doors and windows and creating a break in a cladding run. The Argent f...

FloPlast Shiplap Cladding Starter Trim - 5mtr White

The Cladding Starter Trim gives a solid base from which to begin the installation, with the first length of cladding slotting directly into the purpos...

PolyX Lean to Flashing Trim - 6mtr White

The PolyX Lean to Flashing Trim is used in conjunction with the Rafter Bar Bridging section to ensure a good fit between the flashing and polycarbonat...

Weatherboard Cladding Universal Edge Trim - 3mtr Sand

The Weatherboard Cladding Universal Edge Trim is a one-piece channel used at the edges of cladding installations to hide any cut edges of boards and s...

Weatherboard Cladding Reveal Liner Trim - 3mtr White

The Weatherboard Reveal Liner Trim is used to cover the return into the window reveal when elevation that surrounds the window is being cladded.These ...