123 resultater (0,27162 sekunder)

Vis alle filtre

Mærke

Farve

Vis alle

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

LED-Spot Stella Flat - 2700K - White

LED-Spot Stella Flat - 2700K - White

LED spotlight Stella Flat 24 in white design from Beslag Design, is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced. Fits all our 24V dimmers and sensors.

GBP 42.00
1

LED-Spot Stella Flat - 3000K - Black

LED-Spot Stella Flat - 3000K - Black

LED spotlight Stella Flat 24 in black design from Beslag Design, is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced. Fits all our 24V dimmers and sensors.

GBP 42.00
1

LED-Spot Stella Flat - 2700K - Black

LED-Spot Stella Flat - 2700K - Black

LED spotlight Stella Flat 24 in black design from Beslag Design, is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced. Fits all our 24V dimmers and sensors.

GBP 42.00
1

LED-Spot Stella Flat - 3000K - Stainless Look

LED-Spot Stella Flat - 3000K - Stainless Look

LED spotlight Stella Flat 24 in stainless steel look from Beslag Design, is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced. Fits all our 24V dimmers and sensors.

GBP 42.00
1

LED-Spot Stella Flat - 2700K - Stainless Look

LED-Spot Stella Flat - 2700K - Stainless Look

LED spotlight Stella Flat 24 in stainless steel look from Beslag Design, is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced. Fits all our 24V dimmers and sensors.

GBP 42.00
1

LED-Spot Stella Flat - 3000K - White

LED-Spot Stella Flat - 3000K - White

Stella is equipped with COB (Chip-on-Board) technology. The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounting in e.g. shelves and frames. With Stella Flat mounted in a 16 mm frame, you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.Stella LED spot has a spread angle of as much as 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.For wet spaceAll Stella LED spots are classified as IP44 / IP20 and can be installed in bathrooms and wet areas (closed installation).

GBP 43.00
1

LED-Spot Stella Flat - 2700K - Stainless Look

LED-Spot Stella Flat - 2700K - Stainless Look

Stella is equipped with COB (Chip-on-Board) technology. The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounting in e.g. shelves and frames. With Stella Flat mounted in a 16 mm frame, you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.Stella LED spot has a spread angle of as much as 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.For wet spaceAll Stella LED spots are classified as IP44 / IP20 and can be installed in bathrooms and wet areas (closed installation).

GBP 43.00
1

LED-Spot Stella Flat - 2700K - Black

LED-Spot Stella Flat - 2700K - Black

Stella is equipped with COB (Chip-on-Board) technology. The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounting in e.g. shelves and frames. With Stella Flat mounted in a 16 mm frame, you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.Stella LED spot has a spread angle of as much as 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.For wet spaceAll Stella LED spots are classified as IP44 / IP20 and can be installed in bathrooms and wet areas (closed installation).

GBP 43.00
1

LED-Spot Stella Flat - 3000K - Stainless Look

LED-Spot Stella Flat - 3000K - Stainless Look

Stella is equipped with COB (Chip-on-Board) technology. The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which provides a crystal clear light without visible diodes. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounting in e.g. shelves and frames. With Stella Flat mounted in a 16 mm frame, you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.Stella LED spot has a spread angle of as much as 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light. At the same time, the energy consumption can be reduced as the number of components that the current passes between the circuit board and the diode is reduced.For wet spaceAll Stella LED spots are classified as IP44 / IP20 and can be installed in bathrooms and wet areas (closed installation).

GBP 43.00
1

Door Stop Low - 68mm - Matte Black

Door Stop Low - 68mm - Matte Black

Low is a discreet, round door stopper in matte black finish, with a height of 17mm. Choose between two sizes: 48mm & 68mm in diameter. The door stopper is equipped with a rubber ring to protect the door.Low's design is reminiscent of CD and vinyl records and is inspired by the round parts of a mixing board. The door stopper fits nicely into all rooms of the home and is mounted with screws into the floor.Match the door stopper with matte black door handles to create a cohesive look in the interior design.

GBP 21.70
1

Door Stop Low - 48mm - Matte Black

Door Stop Low - 48mm - Matte Black

Low is a discreet, round door stopper in matte black finish, with a height of 17mm. Choose between two sizes: 48mm & 68mm in diameter. The door stopper is equipped with a rubber ring to protect the door.Low's design is reminiscent of CD and vinyl records and is inspired by the round parts of a mixing board. The door stopper fits nicely into all rooms of the home and is mounted with screws into the floor.Match the door stopper with matte black door handles to create a cohesive look in the interior design.

GBP 15.00
1

Door Stop Low - 68mm - Brushed Brass

Door Stop Low - 68mm - Brushed Brass

Low is a discreet round door stopper in brushed brass, with a height of 17mm, available in two sizes: 48mm & 68mm in diameter. The door stopper is equipped with a rubber ring to protect the door. Its design is reminiscent of CD and vinyl records and is inspired by the round parts of a mixer board. The door stopper fits nicely into all rooms of the home and is mounted with screws on the floor. Pair the door stopper with brass door handles to create a cohesive look in the decor.

GBP 21.70
1

Towel Hook Solid 2-Hook - Chrome

Towel Hook Solid 2-Hook - Chrome

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid 2-hook is available in two different designs; Chrome & brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 4.80
1

Towel Hook Solid 2-Hook - Brushed Stainless Steel Finish

Towel Hook Solid 2-Hook - Brushed Stainless Steel Finish

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid 2-hook is available in two different designs; Chrome & brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 4.80
1

Solid Paper Holder With Lid - Brushed Stainless Steel Finish

Solid Paper Holder With Lid - Brushed Stainless Steel Finish

Solid is a series of bathroom accessories that are made of solid brass and have a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid toilet roll holder is available in two different designs; chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Solid Toilet Roll Holder - Brushed Stainless Steel Finish

Solid Toilet Roll Holder - Brushed Stainless Steel Finish

Solid is a series of bathroom accessories that are made of solid brass and have a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid toilet roll holder is available in two different designs; chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 7.84
1

Towel Hook Solid 4-Hook - Chrome

Towel Hook Solid 4-Hook - Chrome

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid 4-hook is available in two different designs; Chrome & brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 9.60
1

Towel Hook Solid 4-Hook - Brushed Stainless Steel Finish

Towel Hook Solid 4-Hook - Brushed Stainless Steel Finish

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid 4-hook is available in two different designs; Chrome & brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 24.00
1

Base 100 Toilet Roll Holder - Brushed Stainless Steel Finish

Base 100 Toilet Roll Holder - Brushed Stainless Steel Finish

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 toilet roll holder is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Base 200 Spare Paper Holder - Matte Black

Base 200 Spare Paper Holder - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 spare paper holder is available in four different designs; Chrome, brushed stainless steel, brass and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 22.90
1

Towel Hook Base 200 4-Hook - Matte Black

Towel Hook Base 200 4-Hook - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 4-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Base 200 Toilet Roll Holder - Matte Black

Base 200 Toilet Roll Holder - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 toilet roll holder is available in four different designs; Chrome, brushed stainless steel, brass and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 22.90
1

Towel Hook Base 200 4-Hook - Chrome

Towel Hook Base 200 4-Hook - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 4-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Towel Hook Base 200 2-Hook - Polished Brass

Towel Hook Base 200 2-Hook - Polished Brass

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 14.90
1

Towel Hook Base 200 2-Hook - Chrome

Towel Hook Base 200 2-Hook - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1