5 resultater (7,69030 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Junsi iCharger 4010DUO 10S 40A 2000W - ekstremt kraftig dobbelt lader

Junsi iCharger 4010DUO 10S 40A 2000W - ekstremt kraftig dobbelt lader

Junsi iCharger 4010DUO 10S 40A 2000W - ekstremt kraftig dobbelt lader The 4010DUO uses advanced high current and high-performance synchronous buck-boost DC/DC converter technology to deliver up to 2000W of charging power, with a maximum charge/discharge current of up to 40A per channel and two channels in Synchronous Mode up to 70A! Each channel supports 10S lithium batteries, while the impressive TFT LCD screen provides critical battery information including current, voltage, power, capacity, internal resistance, control status, time-consuming, temperature, and more. 64 parameters sets can be saved without repeat settings, simply import/export via an SD card. The 4010DUO applies a 1.2A balance current, and uses a unique "internal resistance correction" balance calculation, and the discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. Plus, the 4010DUO can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of the individual cells within the battery. Internal temperature protection keeps the charger operating safely and efficiently. When the internal temperature exceeds the threshold, the output power is automatically reduced and the charger will shut down when the temperature exceeds the cut-temperature. The intelligent fan control senses the internal temperature and uses an internal temperature sensor to control the fan speed. The 4010DUO has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, time overrun, maximum power and more, while the multi-discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. The hardware programming can be updated through the USB port. The 4010DUO also supports Logview software to display, plot and analyze the charge and discharge data.Features Junsi iCharger 4010DUO: 1400W of charging power per channel, 2000W when both channels are combined Maximum charge current of up to 40A in Asyn. Mode, 70A in Sync Mode Maximum discharge current of 130W per channel, 200W when both channels are combined Each channel supports 10S lithium batteries TFT LCD screen displays current, voltage, power, capacity, internal resistance, control status, time-consuming, temperature and more 64 parameter sets can be saved Measures internal resistance of the battery pack, and also the per-cell internal resistance 1.2A balance current, and uses a unique "internal resistance correction" balance calculation Internal temperature protection Intelligent fan control Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. Supports upgrading the hardware program by USB port Supports Logview software to display, plot and analyze charge and discharge data Specifications:Input Voltage Range:9.050.0VDCMaximum Input Current Limit:<65AMaximum Charge/Discharge Current:70A@in sync mode / 40A in async modeMaximum Charge Power Capacity:2000W (Channel 1400W @input > 23.5V)Maximum Discharge Power Capacity:200W (Channel 130W)Maximum Regenerative Discharge Power Capacity:2000W (Channel 1400W)Maximum Extra Discharge Power Capacity:3200W (Channel 1600W @40V/40A)Maximum Current Drain for Balancing:2.4A in sync mode, 1.2A in async modeNet Weight:1.47kgDimension:210.0140.180.2mm 0.5mm

DKK 3799.00
1

Futaba Servo HPS-CT701 Car Low Profile 30kg 0.07s S.BUS/HV

Futaba Servo HPS-CT701 Car Low Profile 30kg 0.07s S.BUS/HV

Futaba HPS-CT701 - Low Profile ServoExperience the new HPS servo generation! The most powerful Futaba RC car low profile servo ever!The Futaba HPS-CT701 is specially designed for RC cars and sets new standards. A new HPS brushless motor was developed for the HPS servos, which remains significantly cooler during operation. Together with the new HPS technology, there is less power consumption over the entire operating time. Like any S.BUS2 servo, the HPS-CT701 can be connected to all conventional receivers with PWM modulation and can be optimally adapted to the respective operating conditions through programming.The servo is fully compatible for the SR mode ("Super Response": fastest signal transmission) of the T4PM, T7XC, T7PX, T7PXR and T10PX, but can of course also be operated on all other Futaba receivers and with all other Futaba transmitters in normal mode will. This does not require any mode settings on the servo.Features:S.BUS2 high performance HPS digital servoMetal body and metal gearsHPS brushless motor technologySR compatible (Super Response)High Voltageball bearingLow-wear potentiometerHigh resolutionHigh repeatabilitySpecifications:Speed 60: 0.07 s (7.4 V)Torque: 30.0 kgcm (7.4 V)Voltage: 6.0 - 8.4VControl frequency: 50 - 300 HzWeight: 53gSize: 40.5 x 21.0 x 26.2mmThe servos can be addressed in different ways:With the handy programmer SBC-1On the PC with the USB adapter CIU-3At the S.BUS connection of the transmitterThe following parameters can be set:S.BUS channel assignmentServo reverseSoft start (on / off)Mode selection in the event of signal failure hold or freeSoft Servo Run (On / Off)Servo position (servo tester)Servo center adjustment +/- 300 s (approx. 30 degrees)Servo speed, 0.39 - 9 seconds per 45 degreesSetting the dead zone (deadband)Servo travel adjustment left and right separately, approx. 50 - 175%Starting powerCushioningHolding powerID storageThe new HPS servo technologyHigh power with lower power consumption - how does that work?To put it simply: At the beginning of a servo movement (start-up behavior), a significantly larger current pulse is sent to the new HPS servo motor for a very short time than with previous servo motors. However, as the servo movement continues, the HPS motors and associated HPS control developed by Futaba engineers require significantly less energy to maintain performance. This results in a significantly lower current draw from the battery over the operating time, i.e. the operating time is noticeably and measurably longer with the same battery. This advantage can only be used if all the necessary boundary conditions are right and all components are optimally matched to each other. The main concern here is the power supply for the receiving system and the servos.The following information generally applies to every reception position when strong servos are used, but especially when using HPS servos:The power supply must be optimized in each individual component for all occurring conditions. This applies to the entire chain of functions and starts with the choice of battery and ends with the servo. With the HPS servos, the primary concern is to be able to supply the servo with short-term, high impulse currents (peaks) over the entire functional chain (see starting behavior of the HPS servos), and not necessarily with high continuous currents. Only then can the performance of the HPS servos be fully exploited.The power supply must be dimensioned in such a way that a constant, continuous power supply is guaranteed and any voltage fluctuations (caused by current peaks) are kept as low as possible in order to prevent receivers or gyros etc. from "rebooting" (see below).

DKK 2095.00
1

EzRun Combo MAX5 - 56113 800kV 3-8S 1/5

EzRun Combo MAX5 - 56113 800kV 3-8S 1/5

Hobbywing EzRun MAX5 ESC & EzRun 56113SL 800KV Brushless Motor Combo Set MAX5 ESC Features: High Reliability & DurabilityBuilt with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.Great Flexibility & VersatilityWith incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.Applicable to All Weather ConditionsThe waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.High Voltage Built-in BECThe MAX5 has adopted the world?s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today?s high voltage servos on demand used by large scale vehicles.Regular Firmware Updates - Free of ChargeYou can upgrade the MAX5 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.Built-in Anti-Spark SystemThe MAX5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).MAX5 ESC Specs: Type: 1/5, Brushless, Sensorless ESC Waterproof: Yes Cont./Peak Current: 200A/1300A Input Voltage: 3-8S LiPo/9-24 Cells NiMH BEC Output -Switch Mode: 6V/7.4V, 6A Input Wires: 8AWG-200mm Output Wires: 10AWG-200mm Input Connectors: No Output Connectors: 6.5mm Female Gold Connectors (pre-soldered onto the PCB) Fan Size: 45x45x10mm ESC Size: 93.4x58.1x47.8mm Weight: 342g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported ESC Applications: 1/5th Touring Car/Buggy/Truck KV Rating/T Count: 8S LiPo: KV = 1000 (58110 Size Motors) EzRun 56113 Motor Features: Strong PowerWith a fast acceleration response and a rock-solid, stable output, the EZRUN 4985/5687/56113 motor can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain.Thermal ProtectionWhen pairing the EZRUN 4985/5687/56133 motor with the Hobbywing upgraded MAX6/MAX5 ESC, the built-in temperature sensor & port will effectively prevent the motor from being damaged due to overheat and prolong its service life.(*Note: the older Hobbywing MAX5/MAX6 ESC?s doesn?t have the port for connecting to the temperature sensor port on the motor.)High EfficiencyHobbywing?s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90% (an industry-leading level).EzRun 56113SL Specs: Type: 1/5, Brushless, Sensorless Motor Pole Count: 4 KV rating: 800 LiPo Cells: 3-8S No Load: 3.2A Outside Dia: 56mm Length: 113mm Shaft Dia: 8mm Weight: 1210g Front Bearing: ID8xOD22xT7mm Rear Bearing: ID8xOD22xT7mm Timing: 0

DKK 2975.00
1

EzRun MAX5 V3 200A ESC 1/5 8S

EzRun MAX5 V3 200A ESC 1/5 8S

High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC The MAX5 has adopted the world?s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today?s high voltage servos on demand used by large scale vehicles. Advanced and Secure Electronic Switch The MAX5 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge You can upgrade the MAX5 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available. Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces. Built-in Anti-Spark System The MAX5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S). Wide Range of Applications MAX5 Applications:The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It?s also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggiesSpecifications Scale:1/5th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 200A/1300A InputVoltage: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A Wires & Connectors Input Wires: Red-8AWG-200mm*1/Black-8AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB) (Note: All the wire length above is the original length not the length you see from the outside.)Fan Size: 45.0x45.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 93.4x58.1x47.8mm Weight: 342g Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/5th Touring Car/Buggy/Truck KV Rating/T Count: 8S LiPo: KV = 1000 (58110 Size Motors) Click here to look at FAQ and Software Updates for EzRun MAX5 Installation & Connection This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.

DKK 1929.00
1

EzRun Combo MAX6 - 4985SL 1650kV 3-6S 1/6

EzRun Combo MAX6 - 4985SL 1650kV 3-6S 1/6

Hobbywing EzRun MAX6 ESC & EzRun 4985SL 1650KV Motor Combo Set EzRun MAX6 ESC Features: High Reliability & DurabilityBuilt with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.Great Flexibility & VersatilityWith incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.Applicable to All Weather ConditionsThe waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.High Voltage Built-in BECThe MAX6 has adopted the world?s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today?s high voltage servos on demand used by large scale vehicles.Regular Firmware Updates - Free of ChargeYou can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when availableBuilt-in Anti-Spark SystemThe MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to urnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).EzRun MAX6 ESC Specs: Type: 1/6-1/7, Brushless, Sensorless, Waterproof Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH (3-6S with the included motor) BEC Output - Switch Mode: 6V/7.4V, 6A Input Wires: 10AWG-200mm Output Wires: 10AWG-200mm Input Connectors: No Output Connectors: 6.5mm Female Gold Connectors (pre-soldered onto the PCB) Fan Size: 35x35x10mm Size: 70x56x46.5mm Weight: 240g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported MAX6 ESC Applications: Motors: Sensorless Brushless Motors Vehicles: 1/6?1/7 Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV=1500 / 8S LiPo: KV=1200(5892 Size Motors) EzRun 4985SL Motor Features: Strong PowerWith a fast acceleration response and a rock-solid, stable output, the EZRUN 4985/5687/56113 motor can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain.Thermal ProtectionWhen pairing the EZRUN 4985/5687/56133 motor with the Hobbywing upgraded MAX6/MAX5 ESC, the built-in temperature sensor & port will effectively prevent the motor from being damaged due to overheat and prolong its service life.(*Note: the older Hobbywing MAX5/MAX6 ESC?s doesn?t have the port for connecting to the temperature sensor port on the motor.)High EfficiencyHobbywing?s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90% (an industry-leading level).EzRun 4985SL Specs: Type: 1/6, Brushless, Sensorless Motor Pole Count: 4 KV rating: 1650 LiPo Cells: 3-6S No Load: 5.4A Outside Dia: 49mm Length: 86.5mm Shaft Dia: 5mm Weight: 587g Front Bearing: ID6xOD19xT6mm Rear Bearing: ID6xOD19xT6mm Timing: 0

DKK 2079.00
1