18 resultater (0,20014 sekunder)

Vis alle filtre

Mærke

Vis alle

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Traxxas 8026 LED Rock Light Kit TRX-4

Traxxas 8026 LED Rock Light Kit TRX-4

Light up the trail with LED Rock Lights Traxxas LED Rock Lights install directly into the inner fenders of the TRX-4 and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark. Requires: #428028 Power Supply set

DKK 169.00
1

Micro gear main

Micro gear main

1/2A Micro Main Gear Mechanical Retracts with 3/32" wire (pair).These are NON-Rotating 85 or 90 Micro Main Gear Retracts by Robart. They are Designed for Small Gas and Electric Powered Models. This Retract System is Mechanical.Weight: 0.9oz per pair (not including wheels and collars)Weight Range: Up to 907g capacityGear Leg Diameter: 3/32"Distance between mounting holes: 1-5/16" long, 11/16" wideServo Travel: 5/8"Strut Wire Diameter: 3/32"Length of Gear: 41.3 mmWidth of Gear: 22.9 mm

DKK 299.00
1

Oil & diesel pump 12V

Oil & diesel pump 12V

12V Field Pump for Diesel Fuel and Smoke Fluid Stop spending time cranking pump handles and using squeeze bulb type pumps to get smoke oil in and out of planes. Now there is something much easier to use. The 12V Streamer for diesel fuel is same advanced pump design as above, but with a red case to prevent cross contamination. Pump rate is 33 ounces per minute (0.97L). This is something anyone who uses smoke oil or diesel fuel should have in their flight box. NOT to be used with Gas fuels

DKK 193.75
1

LiPo Chassis Balancing Weights 12g - Low CG (2) - 293090

LiPo Chassis Balancing Weights 12g - Low CG (2) - 293090

HUDY slot chassis weights perfectly fit into the chassis slots of most popular electric touring cars, including the XRAY T3. These extra weights necessary for use with lightweight LiPo batteries may be placed in the correct and lowest positions on the chassis. For use with battery packs with or without battery location ledges.Available in two different weights: 6g and 12g. The 6g weights are best used with LiPo packs that have battery chassis location ledges; the 6g weights may be located between the ledges. 2 pieces per package. CNC-machined from brass, black color powdered and laser engraved with the weight for instant identification.

DKK 225.00
1

Wheel Super Lite XL 113mm (4.5) (2)

Wheel Super Lite XL 113mm (4.5) (2)

Du-Bro 450SLX Super Lite XL WheelsThe Super Lite XL are the larger versions of the SL Super Lite wheels modelers have known for years.The Super Lite XL are available in 4", 4.5", 5", 5.5" and 6" diameters. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight!These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package.Size and information:All wheel widths are 1.18" (30mm)All axle diameters are 5/32" (4mm) that can be drilled out to 1/4" (7mm) if needed2 per pkg400 SLX:Diameter: 4.0 (101.6 mm)Axle Dia: 5/32" (4 mm)Weight: 28.4g (each)Width: 1.18" (30 mm)450 SLX:Diameter: 4.5" (114.3 mm)Axle Dia: 5/32" (4 mm)Weight: 42.5g (each)Width: 1.18" (30 mm)500 SLX:Diameter: 5" (127 mm)Axle Dia: 5/32" (4 mm)Weight: 51g (each)Width: 1.18" (30 mm)550 SLX:Diamater: 5.5" (139.7 mm)Axel Dia: 5/32" (4 mm)Weight: 56.7g (each)Width: 1.18" (30 mm)600 SLX:Diamater: 6.0" (152.4 mm)Axel Dia: 5/32" (4 mm)Weight: 70.9g (each)Width: 1.18" (30 mm)

DKK 158.00
1

Wheel Super Lite XL 150mm (6) (2)

Wheel Super Lite XL 150mm (6) (2)

Du-Bro 600SLX Super Lite XL WheelsThe Super Lite XL are the larger versions of the SL Super Lite wheels modelers have known for years.The Super Lite XL are available in 4", 4.5", 5", 5.5" and 6" diameters. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight!These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package.Size and information:All wheel widths are 1.18" (30mm)All axle diameters are 5/32" (4mm) that can be drilled out to 1/4" (7mm) if needed2 per pkg400 SLX:Diameter: 4.0 (101.6 mm)Axle Dia: 5/32" (4 mm)Weight: 28.4g (each)Width: 1.18" (30 mm)450 SLX:Diameter: 4.5" (114.3 mm)Axle Dia: 5/32" (4 mm)Weight: 42.5g (each)Width: 1.18" (30 mm)500 SLX:Diameter: 5" (127 mm)Axle Dia: 5/32" (4 mm)Weight: 51g (each)Width: 1.18" (30 mm)550 SLX:Diamater: 5.5" (139.7 mm)Axel Dia: 5/32" (4 mm)Weight: 56.7g (each)Width: 1.18" (30 mm)600 SLX:Diamater: 6.0" (152.4 mm)Axel Dia: 5/32" (4 mm)Weight: 70.9g (each)Width: 1.18" (30 mm)

DKK 212.00
1

Tire & Wheel ST-HORNET 2,2" Black Soft

Tire & Wheel ST-HORNET 2,2" Black Soft

Tire & Wheel ST-HORNET 2,2" Black Soft Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 89 mm Tire Width: 42.5 mm Weight (each): 77 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Hornet 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 7 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

DKK 159.00
1

Tire & Wheel ST-SPIDER 2,2" Black Soft (2)

Tire & Wheel ST-SPIDER 2,2" Black Soft (2)

Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit.Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 90 mm Tire Width: 42.5 mm Weight (each): 81 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Spider 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 8 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

DKK 159.00
1

Wheels Carbine 1.9 Dually Black (2) Crawler

Wheels Carbine 1.9 Dually Black (2) Crawler

PRO-LINE Carbine 1.9" Black Plastic Internal Bead-Loc Dually Wheels for Rock CrawlersPro-Line is proud to introduce our new Carbine 1.9" Dually Wheels! This pair of Carbine dually wheels will go perfectly with your next military-style or extreme off-road build and will fit 4 standard 1.9" tires, 2 tires per wheel. The best part of the Carbine is the modular wheel design that allows it to be used as a single tire wheel, dual tire wheel, or you can keep adding as many tires as you want with the addition of more Carbine wheels! The face of the Carbine 1.9" wheel features 20 small holes with molded-in bead-loc detail for a tough military look. The included scale wheel nut cover attaches with two screws and completes the rugged appearance. The Carbine Dually wheel includes two optional 12mm hex offsets to fit both straight axles and portal axles and to give you the option for a narrow or wide offset. If you are looking for dually wheels for your build, then look no further than the most advanced wheels to date. Get your very own pair of Pro-Line modular Carbine 1.9" Dually Wheels today!Features:Dually Wheels are Perfect for your Military or Extreme Off-road BuildIncludes a Pair of Dually Wheels for 4 Tires (2 tires per wheel)Can Be Used as a Single Tire WheelGo Beyond Dually and Add as Many Tires as you WantIncludes Wheel Nut CoverTwo Optional 12mm Hex Offsets to Fit a Wide Variety of ApplicationsFits Pro-Line's 1.9" Crawling Tires with the Grunt Being the Most Ideal SizeHex Head Screw Hardware IncludedMade in the USAIncluded:Carbine 1.9" Wheel Face (2 pcs)Dually Wheel Center Tube (2 pcs)Black Plastic Wheel Back (2 pcs)Black Plastic Internal Bead-Loc Ring (4 pcs)Narrow offset 12mm hex (2 pcs)Wide offset 12mm hex (2 pcs)Wheel nut retaining tube (2 pcs)Wheel nut cover (2 pcs)M2.5 x 8 SHCS (48 pcs)Fits:1/10 Rock Crawlers with 12mm Hex

DKK 260.00
1

Wheel Impulse 2.2 Black Bead-Loc 12mm Hex for Crawlers

Wheel Impulse 2.2 Black Bead-Loc 12mm Hex for Crawlers

Pro-Line 1/10 Impulse F/R 2.2" 12mm Crawler Wheels (2) BlackPro-Line is proud to bring the popular Impulse rock crawling wheel styling to the 2.2" crawler segment! These black plastic Internal Bead-Loc Wheels are Proudly Made in the USA and are designed to not only look scale but to be super easy to use by only requiring 6 screws per wheel for mounting tires.The unique 3-piece plastic wheel design bolts together in the back and locks on to all Pro-Line's full list of 2.2" Crawling Tires. These wheels are a direct fit on the Axial Ryft (AXI03005, AXI03009) and will also fit a variety of 2.2" rock crawlers, racers & bouncers such as the Bomber (AXI3016) and Wraith Spawn (AXID9045) with the use of the included axle washers & shims.Features:Popular Impulse Wheel StyleBlacked-Out Wheel Color3-piece Plastic Wheel Design Fits Pro-Line's 2.2" Crawling TiresMolded-in Bead-loc Ring and Lug Nuts for a Scale LookWheel Made from High-strength, Durable DuPont NylonFits 1/10 Rock Crawlers with 12mm HexIn The Bag:(2) Impulse 2.2" Black Plastic Wheel Face(2) Black Plastic Wheel Back(2) Black Plastic Internal Bead-Loc Ring(12) M2.5 x 8 SHCS(4) Axle Adapter Shims & WashersFits:Axial RBX10 RyftAxial RR10 BomberAxial Wraith SpawnSpecs:Vehicle Type: Rock CrawlerPackage Type: Wheels OnlyTrack Surface: Rock CrawlingWheel Position: Front/RearInner Tire / Outer Wheel Diameter: 2.2"Color: BlackScale: 1/10Quantity Option 2 in a packageWheel Hex Size 12mmWheel Type Impulse

DKK 202.00
1

Castle Creations QUICK FIELD PROGRAMMER, CAR VERSION - 010-0063-00

Castle Creations QUICK FIELD PROGRAMMER, CAR VERSION - 010-0063-00

Field Link allows you to modify the most commonly used settings in your Castle Car controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described.FIELD LINK FOR DRIVING SETTING Sidewinder Micro Sidewinder 3 1/10th Mamba Micro Pro Mamba Max Mamba Max Pro Mamba Monster 2 Cutoff voltage X X X X X X Auto LiPo volts/cell X X X X X X Drag brake X X X X X X Brake strength X X X X X X Punch control X X X X X X Reverse type X X X X X X Motor type X X X X X X Motor timing and CHEAT mode* X X X X X X Works with all Castle Link compatible car controllers including: Sidewinder Micro, Mamba 25, Mamba Micro Pro, Sidewinder 3 1/10th, Mamba Max (only connects using the throttle cable. You must upgrade the Mamba Max to software version 1.23 or higher with your Windows PC to enable throttle cable USB connectivity), Mamba Max Pro, and Mamba Monster (all versions). See more compatibilty info here. Requires USB 2.0 on a Windows PC running Castle Link software.System RequirementsField Link is compatible with Windows 2000, XP and Vista (Windows Vista requires a specific installation process. See our Castle Link FAQ page for more information).Settings:Note: Field Link Card is capable of changing the following settings, however, the card cannot change settings on controller series that do not have these settings. See charts above for details. Cutoff voltage Auto LiPo cutoff volts per cell (3.0, 3.1, 3.2, 3.4, 3.5) Drag brake Brake strength Punch control Reverse type Motor type Motor timing and CHEAT mode Compatible with: Sidewinder Micro 1/18th Scale ESCs Mamba-25 1/18th Scale ESCs Mamba Micro Pro 1/18th Scale ESCs Sidewinder 1/10th Scale ESCs Mamba Max 1/10th Scale ESCs Mamba Max Pro 1/10th Scale ESCs Mamba Monster 1/8th Scale and Monster Truck ESCs

DKK 319.00
1

Tires & Wheels Canyon Trail/TRX-4 Black 2.2 Green (2)

Tires & Wheels Canyon Trail/TRX-4 Black 2.2 Green (2)

Traxxas Unlimited Desert Racer (UDR) with LED Set - BLUEThe Traxxas Unlimited Desert Racer (UDR) is engineered on an true to scale fourwheel drive desert race truck chassis. The 4-link solid rear axle design provides massive suspension travel with true authentic driving dynamics.With the UDR, Traxxas is introducing a new Traxxas innovation called Pro-Scale that captures true-scale realism and combines it with extreme 6s LiPo power and 80+ kph performance. The Traxxas Unlimited Desert Racer faithfully captures the look and feel of Trophy Trucks and Unlimited Trick Trucks as they charge hard across the desert at full speed.UDR Specifications (BLUE):Length: 694 mmFront Track: 345 mmRear Track: 345 mmGround Clearance: 58 mmWeight: 6.1 kgHeight: 261 mmWheelbase: 420 mmFront Shock Length: 134 mmFront Threaded Shock Length: 134 mmRear Shock Length: 160 mmRear Threaded Shock Length: 139 mmTires (pre-glued): 134 x 57 mm BFGoodrich KR3 replicasWheels: dual diameter 40 x 56/81 mmSpeed Control: Velineon VXL-6sMotor (electric): 2200kVTransmission: Direct-drive with Torque-Biasing Center DriveOverall Drive Ratio: 17.89:1Front Differential Type: Sealed, 4-gearRear Differential Type: Locked spoolCenter Differential Type: Sealed, 4-gear (1M weight oil)Chassis Structure / Material: Inverted composite tubBrake Type: ElectronicDrive System: Shaft driven 4WDSteering: Dual bellcranks with ball bearingsRadio System: TQi 2-channel transmitter with 6533 TSM receiverServo: 2075X Metal Gear Top Speed (stock gearing): 4s LiPo 48+ kph, 6s LiPo 80+ kphSkill Level: 5Battery Compartment: 181 x 46 x 56 mmMotor specifications:Type: Sensorless brushlessWeight: 406 gLength: 76 mmDiameter: 42 mmConnector Type: Traxxas 6.5 mm bullet connectorsESC Specifications:Input Voltage (cells): 4s6s LiPo (max: 25.2 volts)Case Size: 58 x 48 x 29 mmWeight: 121 gOn-Resistance (@Trans) - Fwd/Rev: 0.0003 Ohms per phaseReverse Delay: Yes, with lockoutLow Voltage Detection (LVD): Yes, programmableWhats In The Box:Unlimited Desert Racer with VXL-6s ESC and 2200kV motorQuick Start GuideTQi 2.4GHz radio systemHigh quality maintenance toolsWhat Youll Need:BatteriesUnlimited Desert Racer accepts a single 4s LiPo battery or dual 2s LiPo batteries or dual 3s LiPo batteriesChargerTraxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performanceFour AA alkaline batteries for the transmitter

DKK 282.00
1

RPM Suspension Arms Upper & Lower Orange (Pair) X-Maxx - 82358

RPM Suspension Arms Upper & Lower Orange (Pair) X-Maxx - 82358

RPM Upper & Lower A-arms for X-Maxx - OrangeQuick Notes:Stronger and lighter than stockSold with 1 ? upper and 1 ? lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas 7729Replaces the lower a-arm from stock Traxxas 7730 & 7731Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms to see what we could do to improve both strength and durability.The result? Our new X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! Our lower A-arm has better ground clearance than stock A-arms and has a cross section based off of our proven 1:5 scale HPI Baja A-arms so you know they?re tough! We?ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won?t force you into the ?walk of shame?. They?re also universal fit, which means they?ll fit on any corner of your truck! No more worrying which arm fits where.RPM X-Maxx A-arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!Tech Notes: Each package comes with one upper and one lower A-arm. This kit replaces the upper a-arm from stock Traxxas 7729 and replaces the lower a-arm from stock Traxxas 7730 & 7731. Four packages will be needed to complete one full vehicle.Tip: For most users, any additional parts won?t be necessary. For heavy use, big jumps or extreme power, RPM recommends replacing the lower A-arm hinge pins with RPM 70510 Threaded Hinge Pins (sold separately).

DKK 237.00
1

RPM Suspension Arms Upper & Lower Blue (Pair) X-Maxx - 82355

RPM Suspension Arms Upper & Lower Blue (Pair) X-Maxx - 82355

RPM Upper & Lower A-arms for X-Maxx - BlueQuick Notes:Stronger and lighter than stockSold with 1 ? upper and 1 ? lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas 7729Replaces the lower a-arm from stock Traxxas 7730 & 7731Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms to see what we could do to improve both strength and durability.The result? Our new X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! Our lower A-arm has better ground clearance than stock A-arms and has a cross section based off of our proven 1:5 scale HPI Baja A-arms so you know they?re tough! We?ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won?t force you into the ?walk of shame?. They?re also universal fit, which means they?ll fit on any corner of your truck! No more worrying which arm fits where.RPM X-Maxx A-arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!Tech Notes: Each package comes with one upper and one lower A-arm. This kit replaces the upper a-arm from stock Traxxas 7729 and replaces the lower a-arm from stock Traxxas 7730 & 7731. Four packages will be needed to complete one full vehicle.Tip: For most users, any additional parts won?t be necessary. For heavy use, big jumps or extreme power, RPM recommends replacing the lower A-arm hinge pins with RPM 70510 Threaded Hinge Pins (sold separately).

DKK 237.00
1

RPM Suspension Arms Front Left (Pair) Kraton 8S, Outcast 8S - 81522

RPM Suspension Arms Front Left (Pair) Kraton 8S, Outcast 8S - 81522

RPM Front Left Upper & Lower A-arms for ARRMA Kraton 8S & Outcast 8S Quick Notes: Lighter than stock by 4.5 grams per upper / lower a-arm pair Replaces the front left upper A-arm from stock ARRMA ARA330561 Replaces the front left lower A-arm from stock ARRMA ARA330589 One vehicle will require 1 ? 81522 & 1 ? 81562 for completion of the front end The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren?t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam?s cross-section is a whopping 5/8? (15.8mm) tall x 3/8? (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck?s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there?s not much worse than a bent chassis.Our front upper A-arms use a dual beam construction where each beam is a massive 1/2" (12.7mm) tall x 3/8? (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability.Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can?t go wrong with RPM!Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (81522) & one right (81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA ARA330561 and the lower A-arms from stock ARA330589.Installation Notes: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 ? 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.

DKK 237.00
1

RPM Suspension Arms Front Right (Pair) Kraton 8S, Outcast 8S - 81562

RPM Suspension Arms Front Right (Pair) Kraton 8S, Outcast 8S - 81562

RPM Front Right Upper & Lower A-arms for ARRMA Kraton 8S & Outcast 8S Quick Notes: Lighter than stock by 4.5 grams per upper / lower a-arm pair Replaces the front left upper A-arm from stock ARRMA ARA330561 Replaces the front left lower A-arm from stock ARRMA ARA330589 One vehicle will require 1 ? 81522 & 1 ? 81562 for completion of the front end The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren?t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam?s cross-section is a whopping 5/8? (15.8mm) tall x 3/8? (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck?s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there?s not much worse than a bent chassis.Our front upper A-arms use a dual beam construction where each beam is a massive 1/2" (12.7mm) tall x 3/8? (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability.Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can?t go wrong with RPM!Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (81522) & one right (81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA ARA330561 and the lower A-arms from stock ARA330589.Installation Notes: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 ? 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.

DKK 237.00
1