99 resultater (0,25196 sekunder)

Vis alle filtre

Mærke

Vis alle

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Tube Bender for 5/32 (4mm) tubes Du-Bro

Tube Bender for 5/32 (4mm) tubes Du-Bro

Designed for use with 5/32" (4 mm) brass fuel tubing or aluminum tubing, these tools are perfect for most configurations. Does not collapse tubing wall. Perfect for use on air lines for retracts. Bends annealed brass aluminum tubing.Designed for use with 5/32" (4 mm) brass fuel tubing or aluminum tubingThis tool is perfect for most configurationsDoes not collapse tubing wallPerfect for use on air lines for retractsBends brass annealed (soft) tubingCreates bends where you want them

DKK 202.00
1

Tube Bender for 1/16-1/8 (1.5-3.2mm) tubes Du-Bro

Tube Bender for 1/16-1/8 (1.5-3.2mm) tubes Du-Bro

Designed for use with 1/8 brass fuel tubing or aluminum tubing, these tools are perfect for most configurations. Does not collapse tubing wall. Perfect for use on air lines for retracts. Bends annealed brass or aluminum tubing.Designed for use with 1/8" brass fuel tubing or aluminum tubingWill bend tubing down to 1/16" diameterThis tool is perfect for most configurationsDoes not collapse tubing wallPerfect for use on air lines for retractsBends brass annealed (soft) tubingCreates bends where you want them

DKK 158.00
1

Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm (36x20'')

Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm (36x20'')

Traxxas 3426 - Heavy Duty Rubber Pit-Table Mat New Traxxas pit mats are a perfect gift idea and companion for any hobbyist. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect workbenches (or mom's kitchen table) from damage. The generous 36" x 20" (91.4 x 50.8cm) size is large enough to accommodate most Traxxas vehicles, with specially designed compartments to organize your parts and tools.Features: Heavy-gauge, chemical-resistant rubber construction protects underlying surfaces Multiple compartments for organizing tools and parts Large 36" x 20" (91.4 x 50.8cm) size accommodates most Traxxas vehicles Helps prevent spillage The perfect accessory for virtually any hobbyist

DKK 219.00
1

Z-Poxy 30-minutes 236.5ml

Z-Poxy 30-minutes 236.5ml

30 Minute Z-Poxy is a premium high strength two part epoxy adhesive that dries clear. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Use it on all fire wall and engine mount installations, its perfect for attaching bulkheads and formers in epoxy glass fuselages and model boat hulls. It does not get brittle with age and is easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for all types of wood working and furniture repair.30-minute cureClear formulaExtra strength permanent bondShock and vibration resistantFiller compatibleWorks best on:AluminumCeramicChinaCraftsFabricFiberglassFurnitureGlassMetalMost PlasticsPotteryRubberTileWoodBottle size:2x 118 ml / 2x 4 fl. oz.

DKK 199.00
1

Kwik Sand Hand Sander 280 mm (1)

Kwik Sand Hand Sander 280 mm (1)

Du-Bro 3400-11 - Kwik Sand Hand Sander 11"/280mmThese aluminum sanding bars are lightweight and durable. Their contoured handle provides a secure, comfortable grip.Kwik Sand hand sanders are available in 5.5 (Part 3400-55) and 11 (Part 3400-11) lengths. They are designed to use precut, self-adhesive sandpaper that is easy to apply. Each Kwik Sand hand sander includes a 3-pack of sandpaper with(1) 80, (1) 150, and (1) 220 grit pieces. Because the sandpaper is already the perfect size, you just peel, stick, and start sanding!We also offer 6/pkg. pre-cut premium, self adhering, sandpaper in 80, 150, & 220 grit. A perfect fit for the Kwik sand!Du-Bro designed Kwik Sand hand sanders with the hobbyist in mind. But we think you will find uses for them all around the house!

DKK 185.00
1

E/Z Bender Wire forming tool for 0.4-1.2 mm wires

E/Z Bender Wire forming tool for 0.4-1.2 mm wires

480 E/Z Bender Wire Forming ToolA commercial quality wire bender, built specifically for the hobby industry. This will bend wire from 0-90 degrees and makes perfect Z-Bends, L-Bends, landing gear & more!With one movement, the E/Z Bender will form wires to your exact specifications. The E/Z Bender features hardened steel forming dies for long lasting operation. It's design was made to be a perfect addition to the modelers workshop. It can be hand held or easily mounted to your work bench. It also fits perfectly in your bench vise.1/pkgThe E/Z Bender can be used with spring and music wire up to .047 (1.18mm) and comes with two forming dies for bending the following wire sizes:Forming Die 1: 0.38-0.51 mm (.015-.020")Forming Die 2: 0.79-1.19 mm (.031-.047")

DKK 327.00
1

E/Z Wire Bender tool for 1.45-2.4 mm wires

E/Z Wire Bender tool for 1.45-2.4 mm wires

481 E/Z Bender Wire Forming Tool 2A commercial quality wire bender, built specifically for the hobby industry. This will bend wire from 0-90 degrees and makes perfect Z-Bends, L-Bends & more!With one movement, the E/Z Bender 2 will form wires to your exact specifications. The E/Z Bender features hardened steel forming dies for long lasting operation. It's design was made to be a perfect addition to the modelers workshop. It can be hand held or easily mounted to your work bench. It also fits perfectly in your bench vise. 1/pkgThe E/Z Bender can be used on pushrods up to .093 (2.35mm) and comes with two forming dies for bending the following wire sizes:Forming Die 1: 1.45-1.82 mm (.062-.072")Forming Die 2: 1.82-2.40 mm (.072-.093")Note: Do not attempt to bend hardened wire (music wire) with this tool.

DKK 327.00
1

Front Wheels Aerodisk 4WD 12mm Hex (10) - 369902

Front Wheels Aerodisk 4WD 12mm Hex (10) - 369902

Specially-designed XB4 wheels with 12 mm internal hex. Perfect fit, recommended for high-competition racing. Made from very flexible yet durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance.Set of 5 pairs (10 pcs) for the price of 4 pairs.Specially-designed 1/10 off-road wheelsExcellent for high-competition racingFlexible, durable material withstands impacts12mm internal hexPerfect fitValue Pack

DKK 295.00
1

HD-2216HB - prcis hurtig digital servo

HD-2216HB - prcis hurtig digital servo

Produkt navn: digital servo HD-2216HB Model nummer:HD-2216HB Specifikationer: * Volt: 4.5 - 6v * Hastighed: .09 sec/60 * Torque: 3,9kg/cm * Gear: Resin * Vgt: 15,8g * Strrelse: 22,8 x 12 x 29,4mm Hent datablad i .PDF for servoen HER. Specielt: En meget prcis all-round servo til f.eks. park-flyver strrelser, helikoptere i skala .30, .40 og .50. Meget tt p strrelse p f.eks. HS 50 / HS 65, HXT 900, Futaba S3107 og S3114 - HD-2216HB er et oplagt alterantiv. HD-2216HB ligner HD-2216HB - men der er forskel i bl.a. gear og specifikationer. Gearene er kompatible med f.eks. JR servohorn. Kunderne har sagt: Great Servo!... Great servo!, I just bought 2 more to replace all my mx-400 servos. fast and great centering. Very fast and exact... I fly those Servos in my 2,5 Kg-Extra. Very fast and exactly. Great units for this price. Perfect.. perfect centering, great torque and good stability. no problems at all !

DKK 199.00
1

Composite Chassis Side Guards For Bent Sides Chassis L+R - Graphite - 321250-G

Composite Chassis Side Guards For Bent Sides Chassis L+R - Graphite - 321250-G

XRAY 321250-G - XB2/XT2 Composite Chassis Side Guards for Bent Sides Chassis L+R GraphiteSpecially-formulated graphite composite mixtureFor high-traction conditionsImproves stabilityMakes car more predictableFits XB2C, XB2D, XT2C, XT2D from 2020 version onwardsSide guards made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite side guards makes car more stable and predictable.Fits to all length of chassis. Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards.

DKK 169.00
1

FLOW-BF Airbrush Bottom Feed 0.5mm 1.8m Hose

FLOW-BF Airbrush Bottom Feed 0.5mm 1.8m Hose

Hobbynox FLOW-BF - Bottom-Feed Double-Action Airbrush SetThe FLOW-BF is the perfect first bottom-feed double-action airbrush set that is meant to be used with waterbased non-toxic paints such as our Hobbynox Airbrush Colors or similar from Createx or Parma Faskolor etc.It’s suitable for most types of “larger” airbrush work but painting Lexan bodyshells for RC cars and most medium to larger sized models is what the FLOW-BF excels at.The FLOW-BF is a complete set that is ready to be used and it connects easily to the Hobbynox Airbrush Compressors or any other airbrush compressor that has an G1/8 BSP male threaded coupler.Our optional airbrush color bottle adapter (#HN20000) is the perfect companion to the BF when attaching our Hobbynox Airbrush Color bottles directly to the airbrush!Included Items:Hobbynox FLOW-BF - Bottom Feed Airbrush SetNozzle/Needle: 0.5 mmPaint Cup: 22cc glas jar (optional #HN20000 bottle adapter)Braided Hose: 1.8 m long with G1/8 Female & G1/8 Female threadsCompressor Adapter: G1/8 Male to G1/4 FemaleTool & Printed Manual

DKK 349.00
1

Interco Bogger 1.9 G8 Crawler Tires (2)

Interco Bogger 1.9 G8 Crawler Tires (2)

Pro-Line Interco Bogger 1.9" G8 Rock Crawler Truck TiresThese massive 5.4" tall x 1.91" wide tires are perfect for guys looking to do some Mud Bogging with their rigs or for recreating a beloved full size truck in perfect scale detail. Pro-Line's officially licensed Interco Bogger tires feature a directional tread pattern with the patented Interco TSL (three-stage lug) design just like the full-size tires. The new Bogger tires are aggressive in stock form and are also extremely versatile and easily modified for even more mud flinging performance. They come in Pro-Line's legendary G8 compound, so you know they will perform beyond expectations right out of the package.Features:Officially licensed Interco BoggerMassive 5.4" tall x 1.91" widePerfectly Suited for Extreme Mud Bogging PerformanceDirectional Tread Pattern with the Patented Interco TSL (three stage lug) DesignDependable G8 MaterialExtremely Versatile and Easily ModifiedFits 1.9" WheelsMade in the USA, since 1982Included:Interco Bogger 1.9" Tires (2 pcs)Foam Inserts (2 pcs)Fits:1.9" Rock Crawling Front or Rear WheelsSpecs:Height: 137mmWidth: 49mm

DKK 189.00
1

PL10147-104 Wedge SC 2.2"/3.0" Z4 (Soft Carpet) Off-Road Tires SC (2)

PL10147-104 Wedge SC 2.2"/3.0" Z4 (Soft Carpet) Off-Road Tires SC (2)

Pro-Line Wedge SC 2.2"/3.0" Z4 (Soft Carpet) Off-Road Carpet Tires for SC Trucks FrontPro-Line is ready to bring the popular Wedge tread pattern to the Short Course class! The Wedge SC is perfect for the front of your Carpet 2wd or 4wd Short Course Truck and provides just the perfect amount of steering you need without being too aggressive. The Hook shaped pins of the Wedge provide all the steering you can handle without being grabby. Pro-Line’s Z compounds provide unparalleled grip on a variety of surfaces used for indoor non-dirt racing (carpet, wood, cardboard, plastic, etc.) while still being long lasting. Be on the cutting edge of carpet tire technology with Pro-Line’s new Wedge Front Tires for your Short Course Truck!Features:Perfect Amount of SteeringNot Edgy or Grabby like other SC Carpet TiresSuper Long LastingMade in the USAIncluded:Wedge SC 2.2"/3.0" Carpet Front Tires (2 pcs)Foam Inserts (2 pcs)Fits:2.2"/3.0" Short Course Front WheelsSpecs:Height: 109 mmWidth: 46 mm

DKK 185.00
1