11 resultater (0,19432 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

RPM Suspension Arms Front Right Black (Pair) E-Revo 2.0 - 81462

RPM Suspension Arms Front Right Black (Pair) E-Revo 2.0 - 81462

RPM Front Right A-arms for E-Revo 2.0 - BlackQuick Notes:5g (per pair) lighter than stockStronger than stockReplaces stock Traxxas 8631While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81462 & 81465 replace stock Traxxas 8631. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM Suspension Arms Front Left Black (Pair) E-Revo 2.0 - 81512

RPM Suspension Arms Front Left Black (Pair) E-Revo 2.0 - 81512

RPM Front Left A-arms for E-Revo 2.0 - BlackQuick Notes:5g (per pair) lighter than stockStronger than stockReplaces stock Traxxas 8632While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81512 & 81515 replace stock Traxxas 8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM Suspension Arms Front Left Blue (Pair) E-Revo 2.0 - 81515

RPM Suspension Arms Front Left Blue (Pair) E-Revo 2.0 - 81515

RPM Front Left A-arms for E-Revo 2.0 - Blue Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas 8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81512 & 81515 replace stock Traxxas 8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM Suspension Arms Rear Blue (Pair) Rustler, Stampede 2WD - 80185

RPM Suspension Arms Rear Blue (Pair) Rustler, Stampede 2WD - 80185

RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Blue Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03? (0.8mm) of slop from the inner arm mount Replaces stock Traxxas 3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we?ve also managed to eliminate over 7 grams of weight per arm! That?s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we?ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030? or 1/32? of slop from the inner arm mount and more than 0.010? or slightly less than 1/64? of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs ? 1 left rear and 1 right rear per package.

DKK 93.00
1

RPM Suspension Arms Rear Green (Pair) Rustler, Stampede 2WD - 80184

RPM Suspension Arms Rear Green (Pair) Rustler, Stampede 2WD - 80184

RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Green Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03? (0.8mm) of slop from the inner arm mount Replaces stock Traxxas 3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we?ve also managed to eliminate over 7 grams of weight per arm! That?s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we?ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030? or 1/32? of slop from the inner arm mount and more than 0.010? or slightly less than 1/64? of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs ? 1 left rear and 1 right rear per package.

DKK 93.00
1

RPM Body Savers 5mm Posts Black (5) - 80302

RPM Body Savers 5mm Posts Black (5) - 80302

RPM Snap-Tite Savers for 3/16? (4.8mm) Body Posts Quick Notes: Fits most bodies with 4.8mm body posts Maximum body thickness = 1.0mm Sold in sets of five Body Savers per package Optional 1/4" (6mm) Body Savers are also available One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack & fracture. This is the reason RPM designed these cool body savers. With their ideal two piece design, it allows one piece to slide through the bottom of the body while the second piece snaps into place from the top of the body. These body savers stay right where you put them, on the body, so you never have to worry about chasing them around! Improve the life of your body significantly with a set of these Body Saver Washers installed!Molded in black nylon or a dyeable white, these Snap-Tite Body Saver Washers will match or contrast any paint scheme you create! Sold in sets of five body savers in each package. That?s four for the body posts and one for either the antenna hole or a transponder mount.Tech Notes: RPM Body Savers work with most bodies with a maximum body thickness of 1mm in an untextured area of the body. They will not work in area of texture such as truck beds where the thickness at the body mount varies.

DKK 25.00
1

RPM Exhaust Headers Zoomies Black (Pair) - 70852

RPM Exhaust Headers Zoomies Black (Pair) - 70852

RPM - Zoomies Mock-Up Exhaust Headers - BlackQuick Notes:Works with 1/18 to 1/10 scale bodiesExtremely versatile mock exhaust headers can be run in any number of configurationsEasy to installWhat are ?Zoomies?, you might be asking? It?s a term dating back to the 1970?s that describes 4 upturned exhaust pipes or headers on each side of the car. You may be most familiar with them from Nitro Funny Cars, Top Fuel and Monster Trucks although a few older folks might remember them sticking out from the rear of a van (you know who you are). Zoomies typically represent the biggest, baddest motors on the planet! If your ride is sporting Zoomies, there?s no question you?ve got horsepower!Now your favorite 1/18 ? 1/10 scale R/C ride can sport a set of custom Zoomies exhaust headers. The RPM version is highly versatile, allowing you to set it up in numerous ways. Do you want them straight up from under the car? No problem. How about tilted backwards? We have you covered! They can even be installed in a through-the-body option in either upwards or downwards options for even more versatility.Each set of RPM Zoomies Exhaust Headers comes with two mounting plates and a total of 8 exhaust tips (four per side). Install a set of these Zoomies with our Mock Intake and Blower Set (RPM 73412 & 73413) and your ride will be the envy of everyone at the track!Tech Notes: RPM Zoomies Exhaust Headers are non-functional and cannot be used as a real exhaust system. There must be at least 11mm of clearance behind the body for this system to install properly without interference with the chassis.Tips: For display vehicles, the installation screws may be swapped for double-sided tape, effectively hiding the mount entirely (tape not recommended for bodies used on running vehicles).

DKK 84.00
1

RPM Suspension Arms Upper & Lower Orange (Pair) X-Maxx - 82358

RPM Suspension Arms Upper & Lower Orange (Pair) X-Maxx - 82358

RPM Upper & Lower A-arms for X-Maxx - OrangeQuick Notes:Stronger and lighter than stockSold with 1 ? upper and 1 ? lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas 7729Replaces the lower a-arm from stock Traxxas 7730 & 7731Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms to see what we could do to improve both strength and durability.The result? Our new X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! Our lower A-arm has better ground clearance than stock A-arms and has a cross section based off of our proven 1:5 scale HPI Baja A-arms so you know they?re tough! We?ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won?t force you into the ?walk of shame?. They?re also universal fit, which means they?ll fit on any corner of your truck! No more worrying which arm fits where.RPM X-Maxx A-arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!Tech Notes: Each package comes with one upper and one lower A-arm. This kit replaces the upper a-arm from stock Traxxas 7729 and replaces the lower a-arm from stock Traxxas 7730 & 7731. Four packages will be needed to complete one full vehicle.Tip: For most users, any additional parts won?t be necessary. For heavy use, big jumps or extreme power, RPM recommends replacing the lower A-arm hinge pins with RPM 70510 Threaded Hinge Pins (sold separately).

DKK 237.00
1

RPM Suspension Arms Upper & Lower Blue (Pair) X-Maxx - 82355

RPM Suspension Arms Upper & Lower Blue (Pair) X-Maxx - 82355

RPM Upper & Lower A-arms for X-Maxx - BlueQuick Notes:Stronger and lighter than stockSold with 1 ? upper and 1 ? lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas 7729Replaces the lower a-arm from stock Traxxas 7730 & 7731Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms to see what we could do to improve both strength and durability.The result? Our new X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! Our lower A-arm has better ground clearance than stock A-arms and has a cross section based off of our proven 1:5 scale HPI Baja A-arms so you know they?re tough! We?ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won?t force you into the ?walk of shame?. They?re also universal fit, which means they?ll fit on any corner of your truck! No more worrying which arm fits where.RPM X-Maxx A-arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!Tech Notes: Each package comes with one upper and one lower A-arm. This kit replaces the upper a-arm from stock Traxxas 7729 and replaces the lower a-arm from stock Traxxas 7730 & 7731. Four packages will be needed to complete one full vehicle.Tip: For most users, any additional parts won?t be necessary. For heavy use, big jumps or extreme power, RPM recommends replacing the lower A-arm hinge pins with RPM 70510 Threaded Hinge Pins (sold separately).

DKK 237.00
1

RPM Suspension Arms Front Left (Pair) Kraton 8S, Outcast 8S - 81522

RPM Suspension Arms Front Left (Pair) Kraton 8S, Outcast 8S - 81522

RPM Front Left Upper & Lower A-arms for ARRMA Kraton 8S & Outcast 8S Quick Notes: Lighter than stock by 4.5 grams per upper / lower a-arm pair Replaces the front left upper A-arm from stock ARRMA ARA330561 Replaces the front left lower A-arm from stock ARRMA ARA330589 One vehicle will require 1 ? 81522 & 1 ? 81562 for completion of the front end The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren?t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam?s cross-section is a whopping 5/8? (15.8mm) tall x 3/8? (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck?s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there?s not much worse than a bent chassis.Our front upper A-arms use a dual beam construction where each beam is a massive 1/2" (12.7mm) tall x 3/8? (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability.Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can?t go wrong with RPM!Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (81522) & one right (81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA ARA330561 and the lower A-arms from stock ARA330589.Installation Notes: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 ? 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.

DKK 237.00
1

RPM Suspension Arms Front Right (Pair) Kraton 8S, Outcast 8S - 81562

RPM Suspension Arms Front Right (Pair) Kraton 8S, Outcast 8S - 81562

RPM Front Right Upper & Lower A-arms for ARRMA Kraton 8S & Outcast 8S Quick Notes: Lighter than stock by 4.5 grams per upper / lower a-arm pair Replaces the front left upper A-arm from stock ARRMA ARA330561 Replaces the front left lower A-arm from stock ARRMA ARA330589 One vehicle will require 1 ? 81522 & 1 ? 81562 for completion of the front end The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren?t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam?s cross-section is a whopping 5/8? (15.8mm) tall x 3/8? (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck?s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there?s not much worse than a bent chassis.Our front upper A-arms use a dual beam construction where each beam is a massive 1/2" (12.7mm) tall x 3/8? (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability.Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can?t go wrong with RPM!Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (81522) & one right (81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA ARA330561 and the lower A-arms from stock ARA330589.Installation Notes: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 ? 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.

DKK 237.00
1