130 resultater (0,24047 sekunder)

Vis alle filtre

Mærke

Farve

Vis alle

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

LED-Spot Stella Flat - 2700K - Rustfrit Look

LED-Spot Stella Flat - 2700K - Rustfrit Look

Stella er udstyret med COB (Chip-on-Board) teknologi. Teknologien betyder, at lysdioderne kan monteres meget tæt og direkte på printkortet, hvilket giver et krystalklart lys uden synlige dioder. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Stella Flat har en fordybningsdybde på mindst 8,5 mm. Det tynde armatur giver større margin ved montering i f.eks. hylder og rammer. Med Stella Flat monteret i en 16 mm ramme får du en 7,5 mm margen. Lyset har en jævn fordeling takket være det store antal lysdioder. Enklere LED-pletter med færre LED'er mangler dette homogene lys.Stella LED-spot har en spredningsvinkel på så meget som 120 grader, hvor lyset har en jævn fordeling takket være det store antal LED'er. Enklere LED-pletter med færre LED'er mangler dette homogene lys. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Til vådt rumAlle Stella LED-spots er klassificeret som IP44 / IP20 og kan installeres i badeværelser og våde områder (lukket installation).

DKK 306.00
3

LED-Spot Stella Flat - 2700K - Sort

LED-Spot Stella Flat - 2700K - Sort

Stella er udstyret med COB (Chip-on-Board) teknologi. Teknologien betyder, at lysdioderne kan monteres meget tæt og direkte på printkortet, hvilket giver et krystalklart lys uden synlige dioder. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Stella Flat har en fordybningsdybde på mindst 8,5 mm. Det tynde armatur giver større margin ved montering i f.eks. hylder og rammer. Med Stella Flat monteret i en 16 mm ramme får du en 7,5 mm margen. Lyset har en jævn fordeling takket være det store antal lysdioder. Enklere LED-pletter med færre LED'er mangler dette homogene lys.Stella LED-spot har en spredningsvinkel på så meget som 120 grader, hvor lyset har en jævn fordeling takket være det store antal LED'er. Enklere LED-pletter med færre LED'er mangler dette homogene lys. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Til vådt rumAlle Stella LED-spots er klassificeret som IP44 / IP20 og kan installeres i badeværelser og våde områder (lukket installation).

DKK 369.00
3

LED-Spot Stella Flat - 3000K - Rustfrit Look

LED-Spot Stella Flat - 3000K - Rustfrit Look

Stella er udstyret med COB (Chip-on-Board) teknologi. Teknologien betyder, at lysdioderne kan monteres meget tæt og direkte på printkortet, hvilket giver et krystalklart lys uden synlige dioder. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Stella Flat har en fordybningsdybde på mindst 8,5 mm. Det tynde armatur giver større margin ved montering i f.eks. hylder og rammer. Med Stella Flat monteret i en 16 mm ramme får du en 7,5 mm margen. Lyset har en jævn fordeling takket være det store antal lysdioder. Enklere LED-pletter med færre LED'er mangler dette homogene lys.Stella LED-spot har en spredningsvinkel på så meget som 120 grader, hvor lyset har en jævn fordeling takket være det store antal LED'er. Enklere LED-pletter med færre LED'er mangler dette homogene lys. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Til vådt rumAlle Stella LED-spots er klassificeret som IP44 / IP20 og kan installeres i badeværelser og våde områder (lukket installation).

DKK 306.00
3

LED-Spot Stella Flat - 3000K - Hvid

LED-Spot Stella Flat - 3000K - Hvid

Stella er udstyret med COB (Chip-on-Board) teknologi. Teknologien betyder, at lysdioderne kan monteres meget tæt og direkte på printkortet, hvilket giver et krystalklart lys uden synlige dioder. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Stella Flat har en fordybningsdybde på mindst 8,5 mm. Det tynde armatur giver større margin ved montering i f.eks. hylder og rammer. Med Stella Flat monteret i en 16 mm ramme får du en 7,5 mm margen. Lyset har en jævn fordeling takket være det store antal lysdioder. Enklere LED-pletter med færre LED'er mangler dette homogene lys.Stella LED-spot har en spredningsvinkel på så meget som 120 grader, hvor lyset har en jævn fordeling takket være det store antal LED'er. Enklere LED-pletter med færre LED'er mangler dette homogene lys. Samtidig kan energiforbruget reduceres, når antallet af komponenter, som strømmen passerer mellem printkortet og dioden, reduceres.Til vådt rumAlle Stella LED-spots er klassificeret som IP44 / IP20 og kan installeres i badeværelser og våde områder (lukket installation).

DKK 369.00
3

Base 100 Toilet Roll Holder - Brushed Stainless Steel Finish

Base 100 Toilet Roll Holder - Brushed Stainless Steel Finish

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 toilet roll holder is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Base 200 Spare Paper Holder - Matte Black

Base 200 Spare Paper Holder - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 spare paper holder is available in four different designs; Chrome, brushed stainless steel, brass and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 22.90
1

Towel Hook Base 200 4-Hook - Matte Black

Towel Hook Base 200 4-Hook - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 4-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Base 200 Toilet Roll Holder - Matte Black

Base 200 Toilet Roll Holder - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 toilet roll holder is available in four different designs; Chrome, brushed stainless steel, brass and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 22.90
1

Towel Hook Base 200 4-Hook - Chrome

Towel Hook Base 200 4-Hook - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 4-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 21.90
1

Towel Hook Base 200 2-Hook - Polished Brass

Towel Hook Base 200 2-Hook - Polished Brass

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 14.90
1